iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13284-1:2001

(Main)

Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method

Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method

This European Standard specifies a reference method for the measurement of low dust concentration in ducted gaseous streams in the concentrations below 50 mg/m3 standard conditions. This method has been validated with special emphasis around 5 mg/m3 on an average half hour sampling time.
This European Standard is primarily developed and validated for gaseous streams emitted by waste incinerators. More generally, it may be applied to gases emitted from stationary sources, and to higher concentrations.
If the gases contain unstable, reactive or semi-volatile substances, the measurement depend on the sampling and filter treatment conditions.

Emissionen aus stationären Quellen - Ermittlung der Staubmassenkonzentration bei geringen Staubkonzentrationen - Teil 1: Manuelles gravimetrisches Verfahren

Diese Europäische Norm legt ein Konventionsmessverfahren zur Messung geringer Staubkonzentrationen in geführten Gasströmen im Konzentrationsbereich unterhalb von 50 mg/m3 unter Bezugsbedingungen fest. Das Verfahren wurde insbesondere für den Bereich um 5 mg/m3 auf der Basis einer Probenahmedauer von einer halben Stunde validiert.
Diese Europäische Norm wurde in erster Linie zur Untersuchung der Abgasströme von Abfallverbrennungsanlagen entwickelt und validiert. Darüber hinaus kann sie auch auf Abgase von stationären Quellen und bei höheren Konzentrationen angewandt werden.
Falls die Abgase instabile, reaktive oder halbflüchtige Stoffe enthalten, hängt die Messung von den Bedingungen der Probenahme und der Filterbehandlung ab.

Emissions de sources fixes - Détermination de la faible concentration en masse de poussières - Partie 1: Méthode gravimétrique manuelle

La présente Norme européenne spécifie une méthode de référence pour le mesurage de faibles concentrations de poussières inférieures à 50 mg/m3 dans les conditions normales dans des effluents gazeux. Cette méthode a été validée plus particulièrement pour des concentrations voisines de 5 mg/m3 avec une durée moyenne d'échantillonnage d'une demi-heure.
La présente Norme européenne est principalement développée et validée pour les effluents gazeux d'incinérateurs de déchets. De manière plus générale, elle peut s'appliquer aux effluents gazeux de sources fixes et à des concentrations plus élevées.
Lorsque les effluents gazeux contiennent des substances instables, réactives ou semi-volatiles, le mesurage dépend des conditions d'échantillonnage et de filtration.

Emisije nepremičnih virov - Določevanje nizkih masnih koncentracij prahu - 1. del: Ročna gravimetrijska metoda

General Information

Status
Withdrawn
Publication Date
20-Nov-2001
Withdrawal Date
31-Oct-2017
ICS
13.040.40 - Stationary source emissions
Technical Committee
CEN/TC 264 - Air quality
Drafting Committee
CEN/TC 264/WG 5 - Total dust at low concentrations (emissions)
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-Nov-2017
Directive
94/67/EC - Incineration of hazardous waste
Mandate
M/002 - Mandate given to CEN concerning a standard for a reference method allowing the calibration of automated measurement systems for total dust at low concentrations and main performance characteristics for the automated measurement systems
Ref Project
SIST EN 13284-1:2002 - Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method

Relations

Replaced By
EN 13284-1:2017 - Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
Effective Date
08-Jun-2022
Child
EN 13284-2:2004 - Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
Effective Date
22-Dec-2008

Buy Standard

EN 13284-1:2002EN 13284-1:2002
PreviousNext
Standard
EN 13284-1:2002
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Emissionen aus stationären Quellen - Ermittlung der Staubmassenkonzentration bei geringen Staubkonzentrationen - Teil 1: Manuelles gravimetrisches VerfahrenEmissions de sources fixes - Détermination de la faible concentration en masse de poussieres - Partie 1: Méthode gravimétrique manuelleStationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method13.040.40Stationary source emissionsICS:Ta slovenski standard je istoveten z:EN 13284-1:2001SIST EN 13284-1:2002en,fr,de01-maj-2002SIST EN 13284-1:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13284-1November 2001ICS 13.040.40English versionStationary source emissions - Determination of low range massconcentration of dust - Part 1: Manual gravimetric methodEmissions de sources fixes - Détermination de la faibleconcentration en masse de poussières - Partie 1: Méthodegravimétrique manuelleEmissionen aus stationären Quellen - Ermittlung derStaubmassenkonzentration bei geringenStaubkonzentrationen - Teil 1: Manuelles gravimetrischesVerfahrenThis European Standard was approved by CEN on 11 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13284-1:2001 ESIST EN 13284-1:2002

(normative)
Requirements related to the working platform.30Annex B
(normative)
Determination of flow direction with Pitot tubes.31B.1Type L Pitot tube.31B.2Type S Pitot tube.31Annex C
(normative)
Methods for determining the positions of sampling points in circular andrectangular ducts.32C.1Method for circular ducts.32C.1.1General.32C.1.2General method for circular ducts.32C.1.3Tangential method for circular ducts.34C.2Method for rectangular ducts.35Annex D
(informative)
Examples of suitable access ports for sampling equipment.37Annex E
(normative)
Proven design of the entry nozzles.39Annex F
(normative)
Summary of the requirements.42Annex G
(informative)
Sampling volume, flow rate and duration.43G.1General.43G.2Weighing uncertainties.43G.3Sampling volume.43G.4Sampling flow rate and duration.43Annex H
(informative)
Examples of weighing bias.44H.1General.44H.2Effect of insufficient temperature equilibrium.44H.3Effect of temperature variations.44H.4Effect of barometric pressure variations.44H.5Conclusions.44Bibliography.46SIST EN 13284-1:2002
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 18040:2024(Main)
Stationary source emissions - Determination of the mass concentration of formaldehyde - Automatic method
SIST-TS CEN/TS 18040:2024

This document specifies a measurement method based on an automatic method for determination of the mass concentration of formaldehyde in ducts and stacks emitting to the atmosphere. It specifies the sampling and gas conditioning system. Furthermore, it specifies the characteristics to be determined and the performance criteria to be fulfilled by portable automated measuring systems (P-AMS) using appropriate techniques to measure formaldehyde.
This method is intended for intermittent monitoring of formaldehyde emissions as well as for the calibration and validation of automated formaldehyde measuring systems.
The analyser is calibrated using test gases produced by a test gas generator.

  • Technical specification
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17255-4:2023(Main)
Stationary source emissions - Data acquisition and handling systems - Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling systems
SIST EN 17255-4:2023

This document specifies the requirements for the installation and on-going quality assurance and quality control of data acquisition and handling systems (DAHS). This includes requirements on:
-   installation (Clause 5);
-   quality assurance and quality control during QAL2 (Clause 6);
-   quality assurance and quality control during on-going operation (Clause 7);
-   annual functional test (Clause 8);
-   documentation (Clause 9).
This document supports the requirements of EN 14181 and legislation such as the IED [1], MCPD [2] and E-PRTR [3]. It does not preclude the use of additional features and functions provided the minimum requirements of this document are met and that these features do not adversely affect data quality, clarity or access.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17911:2023(Main)
Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content
SIST-TP CEN/TR 17911:2023

This document supports the elaboration of standardized measurement methods for the determination of stationary source emissions by manual or automated measurement methods.
This document describes the basic elements of standardized measurement methods for the determination of stationary source emissions.
This document is supplemented by an electronic template providing a uniform structure and common elements and texts.
NOTE   Detailed information on the electronic template is given in Annex A.
This document is addressed to working groups of CEN/TC 264 dealing with stationary source emissions. It aims at facilitating in the working groups the elaboration and the harmonization of documents produced by CEN/TC 264. Such documents can be European standards (EN), European Technical Specifications (CEN/TS) or European Technical Reports (CEN/TR).

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14884:2022(Main)
Stationary source emissions - Determination of total mercury - Automated measuring systems
SIST EN 14884:2023

This document specifies requirements for the calibration and validation (QAL2), the ongoing quality assurance during operation (QAL3) and the annual surveillance test (AST) of AMS used for monitoring total mercury emissions from stationary sources to demonstrate compliance with an emission limit value (ELV). This document is derived from EN 14181 and is only applicable in conjunction with EN 14181.
This document is applicable by direct correlation with the standard reference method (SRM) described in EN 13211.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17656:2022(Main)
Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
SIST EN 17656:2023

This document supplements the requirements of EN ISO/IEC 17043 by providing clarification and additional information for proficiency testing schemes for emission measurements. It gives specific requirements for:
—   competence of proficiency testing providers;
—   proficiency testing facility characteristics; and
—   design, operation and evaluation of proficiency testing schemes by means of interlaboratory comparisons.
All these aspects are necessary in order to organize and conduct proficiency testing on emission measurements.
Requirements on the competence of proficiency testing providers cover personnel, organisation, equipment and environment.
Requirements on the proficiency testing facility characteristics cover measurement sections, measurements ports and working area for the participants.
Requirements on the proficiency testing schemes cover:
—   design, including planning, preparations, homogeneity and stability of test atmospheres and statistical design;
—   operation, including handling and instruction of participants;
—   calculation and use of assigned values; and
—   testing results evaluation, including statistical data.
This document supports the application of proficiency testing schemes for checking the performance of testing laboratories in the context of qualification, accreditation and related quality checks in relation to the application of standardized measurement methods such as standard reference methods (SRM) or alternative methods (AM).
This document is applicable in combination with EN ISO/IEC 17043 only.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17628:2022(Main)
Fugitive and diffuse emissions of common concern to industry sectors - Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere
SIST EN 17628:2022

This document specifies the framework for determining emissions to the atmosphere of Volatile Organic Compounds (VOCs). It specifies a system of methods to detect and/or identify and/or quantify VOC emissions from industrial sources. These methods include Optical Gas Imaging (OGI), Differential Absorption Lidar (DIAL), Solar Occultation Flux (SOF), Tracer Correlation (TC), and Reverse Dispersion Modelling (RDM). It specifies the methodologies for carrying out all the above, and also the performance requirements and capabilities of the direct monitoring methods, the requirements for the results and their measurement uncertainties.
This document specifically addresses, but is not restricted to, the petrochemicals, oil refining, and chemical industries receiving, processing, storing, and/or exporting of VOCs, and includes the emissions of VOCs from the natural gas processing/conditioning industry and the storage of natural gas and similar fuels. The methods specified in this document have been validated at onshore facilities.
This document is applicable to diffuse VOC emissions to atmosphere but not to the emissions of VOCs into water and into solid materials such as soils. It is complementary to EN 15446 [9], the standardized method for the detection, localization of sources (individual leaks from equipment and piping), and quantification of fugitive VOC emissions within the scope of a Leak Detection and Repair Programme (LDAR).
This document has been validated for non-methane VOCs, but the methodology is in principle applicable to methane and other gases.
This document specifies methods to determine (detect, identify and/or quantify) VOC emissions during the periods of monitoring. It does not address the extrapolation of emissions to time periods beyond the monitoring period.

  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17255-3:2021(Main)
Stationary source emissions - Data acquisition and handling systems - Part 3: Specification of requirements for the performance test of data acquisition and handling systems
SIST EN 17255-3:2022

This document specifies the performance test of data acquisition and handling systems (DAHS). This includes:
-   specification of test procedures;
-   description of laboratory tests;
-   requirements on the testing laboratory.
This document supports the requirements of EN 14181 and legislation such as the IED, MCPD and E-PRTR. It does not preclude the use of additional features and functions provided the minimum requirements of this document are met and that these features do not adversely affect data quality, clarity or access.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17638:2021(Main)
Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
SIST-TS CEN/TS 17638:2021

This document specifies the reference method for the determination of the concentration of formaldehyde in emissions from stationary sources. Waste gas samples are taken by absorption in water and subsequently analysed by spectrophotometry or HPLC. The method applies to waste gases in which the formaldehyde concentration is 2 mg/m3 to 60 mg/m3, on dry basis, at the reference conditions of 273 K and 101,3 kPa.
The specific components and the requirements for the measuring system are described. A number of performance characteristics with associated minimum performance criteria are specified for the measuring system.

  • Technical specification
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16429:2021(Main)
Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
SIST EN 16429:2021

This document specifies the standard reference method (SRM) based on an automatic method for determination of the mass concentration of hydrogen chloride (HCl) in ducts and stacks emitting to the atmosphere. It describes the sampling and gas conditioning system.
This document specifies the characteristics to be determined and the performance criteria to be fulfilled by portable automated measuring systems (P-AMS) using the infrared measurement method. It applies for periodic monitoring and for the calibration or control of automated measuring systems (AMS) permanently installed on a stack, for regulatory or other purposes.
The infrared measurement method described in this document can be used as a SRM, provided the expanded uncertainty of the method is less than 20 % relative at the daily Emission Limit Value (ELV), or 1 mg/m3 for ELV below 5 mg/m3, and the criteria associated to performance characteristics described in EN 15267-4 for portable automated measuring systems (P-AMS), are fulfilled.
This document specifies criteria for demonstration of equivalence of an alternative method (AM) to the SRM by application of EN 14793.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17340:2020(Main)
Stationary source emissions - Determination of mass concentration of fluorinated compounds expressed as HF - Standard reference method
SIST-TS CEN/TS 17340:2020

This European Standard specifies a manual method for the determination of the concentration of fluorinated compounds expressed in HF. Two cases are presented:
- first case: the measurand is the concentration of hydrofluoric acid and gaseous and bound to particulates fluorides,
- second case: the measurand is the concentration of hydrofluoric acid and gaseous fluorides.
Three analytical techniques are proposed: ionometry, spectrophotometry and ion-exchange chromatography.
This European Standard specifies the performance characteristics to be determined and the performance criteria to be fulfilled when it is used as the Standard Reference Method (SRM) for periodic monitoring and for calibration or control of Automated Measuring Systems (AMS) permanently installed on a stack, for regulatory or other purposes.
This document applies to more or less dust-laden flue gases whose HF concentration may vary between 0,1 mg/m3 and 10 mg/m3, at standard conditions of pressure and temperature. The quantification limit of the method is estimated at 0.1 mg/m3 for a sampled volume of 0.1 m3.

  • Technical specification
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day