EN 17255-4:2023
(Main)Stationary source emissions - Data acquisition and handling systems - Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling systems
Stationary source emissions - Data acquisition and handling systems - Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling systems
This document specifies the requirements for the installation and on-going quality assurance and quality control of data acquisition and handling systems (DAHS). This includes requirements on:
- installation (Clause 5);
- quality assurance and quality control during QAL2 (Clause 6);
- quality assurance and quality control during on-going operation (Clause 7);
- annual functional test (Clause 8);
- documentation (Clause 9).
This document supports the requirements of EN 14181 and legislation such as the IED [1], MCPD [2] and E-PRTR [3]. It does not preclude the use of additional features and functions provided the minimum requirements of this document are met and that these features do not adversely affect data quality, clarity or access.
Emissionen aus stationären Quellen - Datenerfassungs- und Auswerteeinrichtungen - Teil 4: Festlegung von Anforderungen an den Einbau sowie die laufende Qualitätssicherung und Qualitätslenkung von Datenerfassungs- und Auswerteeinrichtungen
Dieses Dokument legt die Anforderungen an den Einbau sowie die laufende Qualitätssicherung und Qualitätslenkung von Datenerfassungs- und Auswerteeinrichtungen (DAHS) fest. Dies beinhaltet Anforderungen an:
- den Einbau (Abschnitt 5);
- die Qualitätssicherung und Qualitätslenkung bei der QAL2 (Abschnitt 6);
- die Qualitätssicherung und Qualitätslenkung beim laufenden Betrieb (Abschnitt 7);
- die jährliche Funktionskontrolle (Abschnitt 8);
- Dokumentation (Abschnitt 9).
Dieses Dokument unterstützt die Anforderungen von EN 14181 sowie von Rechtsvorschriften wie IED [1], MCPD [2] und E-PRTR [3]. Sie schließt die Verwendung zusätzlicher Möglichkeiten und Funktionen unter der Voraussetzung nicht aus, dass die Mindestanforderungen in diesem Dokument erfüllt werden und diese Möglichkeiten die Qualität und Verständlichkeit der Daten sowie den Datenzugriff nicht negativ beeinträchtigen.
Émissions de sources fixes - Systèmes d'acquisition et de traitement de données - Partie 4: Spécification des exigences relatives à l'installation ainsi qu'à l'assurance qualité et au contrôle qualité en continu
Le présent document spécifie les exigences relatives à l'installation ainsi qu'à l'assurance qualité et au contrôle qualité en continu des systèmes d'acquisition et de traitement de données (DAHS). Elles couvrent notamment :
- l’installation (Article 5) ;
- l'assurance qualité et le contrôle qualité pendant la procédure QAL2 (Article 6) ;
- l'assurance qualité et le contrôle qualité pendant le fonctionnement en continu (Article 7) ;
- le test opérationnel annuel (Article 8) ;
- la documentation (Article 9).
Le présent document vient à l'appui des exigences de l'EN 14181 et de législations telles que la directive IED[1], la directive MCP[2] et le règlement relatif au PRTR européen[3]. Il n'interdit pas l'utilisation de caractéristiques et de fonctions supplémentaires, à condition que les exigences minimales du présent document soient remplies et que ces caractéristiques n'aient pas d'influence négative sur la qualité et la clarté des données ou sur l'accès à ces dernières.
Emisije nepremičnih virov - Sistemi za zajem in vrednotenje podatkov (DAHS) - 4. del: Specifikacija zahtev za vgradnjo ter postopki zagotavljanja kakovosti in kontrole kakovosti sistemov za zajem in vrednotenje podatkov
Ta dokument določa zahteve za namestitev ter stalno zagotavljanje in nadzor kakovosti sistemov za zajem in vrednotenje podatkov (DAHS). To vključuje zahteve za
– namestitev (točka 5);
– zagotavljanje in nadzor kakovosti v postopku QAL2 (točka 6);
– zagotavljanje in nadzor kakovosti pri stalnem delovanju (točka 7);
– letni funkcionalni preskus (točka 8).
Ta dokument podpira zahteve standarda EN 14181 in zakonodaje, kot so Direktiva o industrijskih izpustih (IED), Direktiva o srednje velikih kurilnih napravah (MCPD) ter uredba E-RIPO. Ne izključuje uporabe dodatnih značilnosti in funkcij, če so izpolnjene minimalne zahteve tega evropskega standarda in če te značilnosti ne vplivajo negativno na kakovost, jasnost ter dostop do podatkov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2023
Emisije nepremičnih virov - Sistemi za zajem in vrednotenje podatkov (DAHS) - 4.
del: Specifikacija zahtev za vgradnjo ter postopki zagotavljanja kakovosti in
kontrole kakovosti sistemov za zajem in vrednotenje podatkov
Stationary source emissions - Data acquisition and handling systems - Part 4:
Specification of requirements for the installation and on-going quality assurance and
quality control of data acquisition and handling systems
Emissionen aus stationären Quellen - Datenerfassungs- und Auswerteeinrichtungen -
Teil 4: Festlegung von Anforderungen an den Einbau sowie die laufende
Qualitätssicherung und Qualitätslenkung von Datenerfassungs- und
Auswerteeinrichtungen
Émissions de sources fixes - Systèmes d'acquisition et de traitement de données - Partie
4: Spécification des exigences relatives à l'installation ainsi qu'à l'assurance qualité et au
contrôle qualité en continu
Ta slovenski standard je istoveten z: EN 17255-4:2023
ICS:
13.040.40 Emisije nepremičnih virov Stationary source emissions
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17255-4
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 13.040.40
English Version
Stationary source emissions - Data acquisition and
handling systems - Part 4: Specification of requirements
for the installation and on-going quality assurance and
quality control of data acquisition and handling systems
Émissions de sources fixes - Systèmes d'acquisition et Emissionen aus stationären Quellen - Datenerfassungs-
de traitement de données - Partie 4: Spécification des und Auswerteeinrichtungen - Teil 4: Festlegung von
exigences relatives à l'installation ainsi qu'à Anforderungen an den Einbau sowie die laufende
l'assurance qualité et au contrôle qualité en continu Qualitätssicherung und Qualitätslenkung von
Datenerfassungs- und Auswerteeinrichtungen
This European Standard was approved by CEN on 10 March 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17255-4:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Installation . 7
5.1 Installation requirements . 7
5.2 Checking the correct installation . 8
5.2.1 General . 8
5.2.2 Test requirements . 8
5.2.3 Report . 9
5.2.4 Competence of testing laboratories . 9
6 Quality assurance and quality control during QAL2 of the AMS . 9
7 Quality assurance and quality control during on-going operation . 9
8 Annual functional test . 10
8.1 General . 10
8.2 Description of the DAHS . 10
8.3 Assignment of input and output signals . 10
8.4 Tests . 10
8.4.1 Correct setting of parameters . 10
8.4.2 Configuration parameters. 11
8.4.3 Requirements of regulatory stipulations . 11
8.4.4 Remote emission control module . 11
8.4.5 System time . 11
8.4.6 Conformity of the installation site . 11
8.4.7 Data transmission . 12
8.4.8 Protection against unauthorized parameter changes . 12
8.4.9 Data back-up . 12
8.4.10 Additionally required functionality for data transmission . 12
8.4.11 Averaging times . 12
8.4.12 Processing of plant operation modes . 12
8.4.13 Special features of the measured value processing . 12
8.4.14 Special requirements for waste incineration . 13
8.4.15 Flagging of data for special plant operation modes . 13
8.4.16 Reporting . 13
8.5 Report . 13
9 Documentation . 13
Annex A (normative) DAHS documentation . 14
A.1 General . 14
A.2 Setting-up of the DAHS file . 14
A.3 Management of the DAHS file . 14
A.4 Composition of the DAHS file . 15
A.4.1 Identification record . 15
A.4.2 Installation record . 15
A.4.3 Follow-up record . 16
A.4.4 Configuration record . 16
A.4.5 Report on installation . 16
A.4.6 Reports on functional tests . 16
A.4.7 Report on interventions . 16
Annex B (normative) Parameter setting . 17
B.1 General . 17
B.2 Measured components . 17
B.3 Reference quantities and other measurands . 17
B.4 Supplementary details on parameter setting . 17
B.5 Operating states and modes taken into account by the DAHS. 17
Bibliography . 18
European foreword
This document (EN 17255-4:2023) has been prepared by Technical Committee CEN/TC 264 “Air
Quality”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2023 and conflicting national standards shall
be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is Part 4 of the EN 17255 series.
The EN 17255 series, published under the general title “Stationary source emissions — Data acquisition
and handling systems”, specifies:
— requirements for the handling and reporting of data;
— requirements on data acquisition and handling systems;
— requirements for the performance test of data acquisition and handling systems;
— requirements for the installation and on-going quality assurance and quality control of data
acquisition and handling systems.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
This document forms part of a series of standards which, between them, govern the process for the
quality assurance of data received by a data acquisi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.