EN 17255-2:2020
(Main)Stationary source emissions - Data acquisition and handling systems - Part 2: Specification of requirements on data acquisition and handling systems
Stationary source emissions - Data acquisition and handling systems - Part 2: Specification of requirements on data acquisition and handling systems
This document specifies the performance requirements on data acquisition and handling systems (DAHS) regarding implementation of the procedures defined in EN 17255-1 including
— data acquisition;
— data processing;
— data storage;
— data output;
— generation of reports;
— system functions;
— data security;
— documentation.
This document supports the requirements of EN 14181 and legislation such as the IED and E-PRTR. It does not preclude the use of additional features and functions provided the minimum requirements of this document are met and that these features do not adversely affect data quality, clarity or access.
Emissionen aus stationären Quellen — Datenerfassungs- und Auswerteeinrichtungen — Teil 2: Festlegung von Anforderungen an Datenerfassungs- und Auswerteeinrichtungen
Dieses Dokument legt die Leistungsanforderungen an Datenerfassungs- und Auswerteeinrichtungen (DAHS) hinsichtlich der Umsetzung der in EN 17255 1 definierten Verfahren fest, einschließlich
- Datenerfassung;
- Datenverarbeitung;
- Datenspeicherung;
- Datenausgabe;
- Berichterstellung;
- Systemfunktionen;
- Datenintegrität;
- Dokumentation.
Dieses Dokument unterstützt die Anforderungen von EN 14181 sowie Rechtsvorschriften wie IED und E PRTR. Sie schließt die Verwendung zusätzlicher Möglichkeiten und Funktionen unter der Voraussetzung nicht aus, dass die Mindestanforderungen in diesem Dokument erfüllt werden und diese Möglichkeiten die Qualität und Verständlichkeit der Daten sowie den Datenzugriff nicht negativ beeinträchtigen.
Émissions de sources fixes — Systèmes d’acquisition et de traitement de données — Partie 2 : Spécification des exigences relatives aux systèmes d’acquisition et de traitement de données
Le présent document spécifie les exigences de performance relatives aux systèmes d'acquisition et de traitement de données (DAHS) concernant la mise en oeuvre des modes opératoires définis dans l'EN 17255 1 ; ces exigences portent sur :
- l'acquisition des donnés ;
- le traitement des données ;
- le stockage de données ;
- la sortie des données ;
- la production de rapports ;
- les fonctions du système ;
- l'intégrité des données ;
- la documentation.
Le présent document vient à l'appui des exigences de l'EN 14181 et de législations telles que la Directive IED et le règlement relatif au PRTR européen. Il n'interdit pas l'utilisation de caractéristiques et de fonctions supplémentaires, à condition que les exigences minimales du présent document soient remplies et que ces caractéristiques n'aient pas d'influence négative sur la qualité et la clarté des données ou sur l'accès à ces dernières.
Emisije nepremičnih virov - Sistemi za zajem in vrednotenje podatkov (DAHS) - 2. del: Specifikacija zahtev za sisteme za zajem in vrednotenje podatkov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2020
Emisije nepremičnih virov - Sistemi za zajem in vrednotenje podatkov (DAHS) - 2.
del: Specifikacija zahtev za sisteme za zajem in vrednotenje podatkov
Stationary source emissions - Data acquisition and handling systems - Part 2:
Specification of requirements on data acquisition and handling systems
Emissionen aus stationären Quellen - Datenerfassungs- und Auswerteeinrichtungen -
Teil 2: Festlegung von Anforderungen an Datenerfassungs- und Auswerteeinrichtungen
Émissions de sources fixes - Systèmes d’acquisition et de traitement de données - Partie
2 : Spécification des exigences relatives aux systèmes d’acquisition et de traitement de
données
Ta slovenski standard je istoveten z: EN 17255-2:2020
ICS:
13.040.40 Emisije nepremičnih virov Stationary source emissions
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17255-2
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 13.040.40
English Version
Stationary source emissions - Data acquisition and
handling systems - Part 2: Specification of requirements on
data acquisition and handling systems
Émissions de sources fixes - Systèmes d'acquisition et Emissionen aus stationären Quellen - Datenerfassungs-
de traitement de données - Partie 2 : Spécification des und Auswerteeinrichtungen - Teil 2: Festlegung von
exigences relatives aux systèmes d'acquisition et de Anforderungen an Datenerfassungs- und
traitement de données Auswerteeinrichtungen
This European Standard was approved by CEN on 7 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17255-2:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 8
5 Principles . 8
6 Performance requirements . 9
6.1 General . 9
6.2 Data acquisition . 10
6.2.1 Overview . 10
6.2.2 Interfaces . 10
6.2.3 Manual data input . 11
6.2.4 Remote data logger unit . 11
6.3 Input data processing . 11
6.3.1 Validity of input data . 11
6.3.2 First level data (FLD) . 12
6.4 Reported data . 12
6.4.1 General . 12
6.4.2 Warnings, alarms and violations . 12
6.5 Reports . 12
6.5.1 General . 12
6.5.2 Emission reports . 13
6.5.3 System reports . 13
6.6 Data storage . 13
6.6.1 General . 13
6.6.2 Time stamping . 13
6.6.3 Storage of FLD . 13
6.6.4 Storage of STA . 13
6.6.5 Storage of standardized STA (SSTA). 14
6.6.6 Storage of validated STA (VSTA) . 14
6.6.7 Storage of QAL3 data . 14
6.6.8 Storage of warnings, alarms and violations . 14
6.6.9 Storage of the event-log and configuration parameters . 14
6.7 System functions . 14
6.7.1 Event log . 14
6.7.2 Configuration . 14
6.7.3 Export of data . 14
6.7.4 Test mode . 15
6.8 Data integrity . 15
6.8.1 DAHS availability . 15
6.8.2 Tamper-proof data transfer and handling . 15
6.8.3 Preventing loss of data . 15
6.8.4 Data back-up . 15
6.8.5 DAHS identification . 16
6.8.6 Time management . 16
6.9 Documentation . 16
Annex A (informative) Example list of configuration parameters . 17
A.1 Measurement channel configuration . 17
A.2 Data processing configuration . 18
A.3 Data storage configuration . 19
A.4 Report configuration . 19
Bibliography . 20
European foreword
This document (EN 17255-2:2020) has been prepared by Technical Committee CEN/TC 264 “Air
Quality”, the secretariat of which is held by DIN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by October 2020, and conflicting national standards shall be withdrawn
at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is Part 2 of the EN 17255 series.
The EN 17255 series, published under the general title Stationary source emissions — Data acquisition
and handling systems, specifies:
— requirements for the handling and reporting of data;
— requirements on data acquisition and handling systems;
— requirements for the performance test of data acquisition and handling systems;
— requirements for the installation and on-going quality assurance and quality control of data
acquisition and handling systems.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
This document forms part of a series of standards which, between them, govern the process for the
quality assurance of data received by a data acquisition and handling system (DAHS) from automated
measuring systems (AMS), being used for monitoring emissions from stationary sources and quality
ensured to EN 14181.
The input data can be either in analogue representation or in digital form directly from an AMS or via a
digital bus system. Inputs can include the data from the AMS, peripheral data needed for calculation of
the reported values and information on plant conditions needed to apply data selection criteria.
The data acquisition and handling system (DAHS) receives the raw data, as they are measured, averaged
and presented by the AMS, and converts, averages, stores and reports data as required by legislation.
This series of standards suggests that the process of data handling is best performed in a dedicated DAHS.
It does not preclude the use of other options for all or part of the process provided that it can
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.