EN 255-3:1997
(Main)Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units
This part of EN 255 specifies methods for testing and reporting of the rating and it specifies requirements for marking of air/water and water/water heat pumps with electrically driven compressors when used for sanitary hot water. When these units are used for space heating, then prEN 255-2 applies. This standard applies to factory-made units which can be ducted. In the case of unitsconsisting of several parts, the standard applies only to those designed and supplied as a complete package.
Luftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Heizen - Teil 3: Prüfungen und Anforderungen an die Kennzeichnung von Geräten zum Erwärmen von Brauchwasser
Dieser Teil der EN 255 legt Verfahren zur Prüfung und Angabe der Leistung fest und enthält Anforderungen an die Kennzeichnung von Luft/Wasser- und Wasser/Wasser-Wärmepumpen mit elektrisch angetrieben Verdichten zum Erwärmen von Brauchwasser, werden diese Geräte für die Raumheizung eingesetzt dann gilt prEN 255-2. Diese Norm gilt für fabrikmässig zusammengebaute Geräte, die mit Luftkanälen versehen sein können.
Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur avec compresseur entraîné par moteur électrique - Mode chauffage - Partie 3: Essais et exigences de marquage pour les appareils pour eau chaude sanitaire
La présente partie de l'EN 255 spécifie les méthodes d'essai des performances, la manière d'exprimer ces performances, et les exigences de marquage des pompes à chaleur air/eau et eau/eau, avec le compresseur entraîn par moteur électriquelorsqu'elles sont utilisées pour l'eau chaude sanitaire. Lorsque ces appareils sont utilisés pour le chauffage des locaux, prEN 255-2 s'applique. La présente norme s'applique aux appareils fabriqués en usine, qui peuvent être raccordés.
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units
General Information
- Status
- Withdrawn
- Publication Date
- 18-Feb-1997
- Withdrawal Date
- 25-Jan-2011
- Technical Committee
- CEN/TC 113 - Heat pumps and air conditioning units
- Drafting Committee
- CEN/TC 113 - Heat pumps and air conditioning units
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Jan-2011
- Completion Date
- 26-Jan-2011
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
DNV
DNV is an independent assurance and risk management provider.
Lloyd's Register
Lloyd's Register is a global professional services organisation specialising in engineering and technology.
Sponsored listings
Frequently Asked Questions
EN 255-3:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units". This standard covers: This part of EN 255 specifies methods for testing and reporting of the rating and it specifies requirements for marking of air/water and water/water heat pumps with electrically driven compressors when used for sanitary hot water. When these units are used for space heating, then prEN 255-2 applies. This standard applies to factory-made units which can be ducted. In the case of unitsconsisting of several parts, the standard applies only to those designed and supplied as a complete package.
This part of EN 255 specifies methods for testing and reporting of the rating and it specifies requirements for marking of air/water and water/water heat pumps with electrically driven compressors when used for sanitary hot water. When these units are used for space heating, then prEN 255-2 applies. This standard applies to factory-made units which can be ducted. In the case of unitsconsisting of several parts, the standard applies only to those designed and supplied as a complete package.
EN 255-3:1997 is classified under the following ICS (International Classification for Standards) categories: 27.080 - Heat pumps. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 255-3:1997 has the following relationships with other standards: It is inter standard links to EN 16147:2011, EN 15316-4-2:2008, EN 255-3:1997/AC:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 255-3:1997 is associated with the following European legislation: EU Directives/Regulations: 92/75/EEC; Standardization Mandates: M/274. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 255-3:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water unitsLuftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Heizen - Teil 3: Prüfungen und Anforderungen an die Kennzeichnung von Geräten zum Erwärmen von BrauchwasserClimatiseurs, groupes refroidisseurs de liquide et pompes a chaleur avec compresseur entraîné par moteur électrique - Mode chauffage - Partie 3: Essais et exigences de marquage pour les appareils pour eau chaude sanitaireAir conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...