EN 13121-1:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditionsNadzemni rezervoarji iz armiranega poliestra - 1. del: Osnovni material - Zahteve za specifikacije in prevzemne pogojeRéservoirs et récipients en PRV pour applications hors sol - Partie 1: Matieres premieres - Conditions de spécifications et conditions d'utilisationOberirdische GFK-Tanks und Behälter - Teil 1: Ausgangsmaterialien, Spezifikations- und AnnahmebedingungenTa slovenski standard je istoveten z:EN 13121-1:2003SIST EN 13121-1:2003en23.020.10ICS:SLOVENSKI
STANDARDSIST EN 13121-1:200301-december-2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13121-1May 2003ICS 23.020.10English versionGRP tanks and vessels for use above ground - Part 1: Rawmaterials - Specification conditions and acceptance conditionsRéservoirs et récipients en PRV pour applications hors sol -Partie 1: Matières premières - Conditions de spécificationset conditions d'utilisationOberirdische GFK-Tanks und -Behälter - Teil 1:Ausgangsmaterialien - Spezifikations- undAnnahmebedingungenThis European Standard was approved by CEN on 17 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13121-1:2003 E

Relationship between this European Standard and the Essential Requirementsof EU Directive 97/23/EC.20Bibliography.21

Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995).EN ISO 9073-3, Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation.EN ISO 9702, Plastics — Amine epoxide hardeners — Determination of primary, secondary and tertiary aminegroup nitrogen content (ISO 9702:1996).EN ISO 9771, Plastics — Phenolic resins — Determination of the pseudo-adiabatic temperature rise of liquid resolswhen cured under acid conditions (ISO 9771:1995).ISO 1183, Plastics — Methods for determining the density and relative density of non-cellular plastics.ISO 1887, Textile glass — Determination of combustible-matter content.ISO 2113, Reinforcement fibres — Woven fabrics — Basis for a specification.ISO 2211, Liquid chemical products — Measurement of colour in Hazen units (platinum-cobalt scale).ISO 2559, Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifi-cations.ISO 2797, Textile glass — Rovings — Basis for a specification.ISO 3374, Reinforcement products – Mats and fabrics — Determination of mass per unit area.ISO 5661, Petroleum products — Hydrocarbon liquids — Determination of refractive index.

60602,0
901BUPStandard glycolsa, bOrthophthalic acidEthylenedicarbonxylic acids45120
90501,5
752AUPStandard glycolsa, bIsophthalic acid, HET acidEthylenedicarbonxylic acids50
60602,0
902BUPStandard glycolsaIsophthalic acid, HET acidEthylenedica
...