EN 13617-3:2012
(Main)Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
This European Standard specifies safety and environmental requirements for the construction and performance of shear valves to be fitted to metering pumps, dispensers, and/or satellite delivery systems installed at petrol filling stations and used to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l min-1.
The requirements apply to shear valves at ambient temperatures from -20 °C to +40 °C with the possibility for an extended temperature range.
It pays particular attention to mechanical and hydraulic characteristics.
NOTE 1 This European Standard does not apply to equipment for use with liquefied petroleum gas (LPG) or liquefied natural gas (LNG) or compressed natural gas (CNG).
NOTE 2 Fuels other than of Explosion Group IIA are excluded from this European Standard.
Tankstellen - Teil 3: Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von Abscherventilen
Diese Europäische Norm legt die sicherheitstechnischen und Umweltanforderungen an den Bau und die Arbeitsweise von Abscherventilen an Zapfsäulen, druckversorgten Zapfsäulen und/oder Nebenzapfstellen fest, die an Tankstellen installiert werden für die Abgabe von flüssigen Kraftstoffen in Tanks von Kraftfahrzeugen, Booten und Leichtflug¬zeugen sowie in tragbare Behälter bei Durchflussraten bis zu 200 l min1.
Die Anforderungen gelten für Abscherventile bei Umgebungstemperaturen zwischen –20 °C und 40 °C, wobei ein erweiterter Temperaturbereich möglich ist.
In dieser Europäischen Norm werden besonders die mechanischen und hydraulischen Eigenschaften berücksichtigt.
ANMERKUNG 1 Diese Europäische Norm gilt nicht für Ausrüstung für Anwendungen mit Flüssiggas (LPG, en: liquefied petroleum gas) oder Flüssigerdgas (LNG, en: liquefied natural gas) oder komprimiertem Erdgas (CNG, en: compressed natural gas).
ANMERKUNG 2 Diese Europäische Norm gilt nicht für Kraftstoffe, die nicht zur Explosionsgruppe IIA gehören.
Stations-service - Partie 3: Exigences de sécurité relatives à la construction et aux performances des raccords de sécurité
La présente Norme européenne spécifie les exigences relatives à la construction et aux performances en matière de sécurité et de protection de l’environnement des raccords de sécurité à monter sur des distributeurs et/ou systèmes de livraison satellites installés sur stations-service et utilisés pour distribuer des carburants liquides dans les réservoirs de véhicules à moteur, de bateaux, d’avions légers et dans des réservoirs portables, à des débits pouvant atteindre 200 l min-1.
Les exigences s'appliquent aux raccords cassants à des températures comprises entre –20 °C et +40 °C avec la possibilité d'étendre la plage de température.
Elle accorde une importance particulière aux caractéristiques mécaniques et hydrauliques.
NOTE 1 La présente Norme européenne ne s’applique pas aux équipements mettant en œuvre du gaz de pétrole liquéfié (GPL) ou du gaz naturel liquéfié (GNL) ou du gaz naturel compressé (GNC).
NOTE 2 Les carburants autres que ceux du Groupe d’Explosion IIA sont exclus de la présente Norme européenne.
Bencinski servisi - 3. del: Varnostne zahteve za izdelavo in lastnosti varovalnih ventilov
Ta dokument določa varnostne in okoljske zahteve za izdelavo in lastnosti varovalnih ventilov, nameščenih na tlačne in sesalne naprave za točenje goriva in/ali spremljevalne sisteme dovajanja, ki so postavljeni na bencinskih servisih in se uporabljajo za točenje tekočih goriv v rezervoarje motornih vozil, čolnov in lahkih letal ter v premične rezervoarje s pretokom do 200 l×min-1.
Posebej se osredotoča na mehanske in hidravlične lastnosti.
OPOMBA Utekočinjen naftni plin (LPG) ni tekočina v smislu tega dokumenta.
General Information
- Status
- Withdrawn
- Publication Date
- 13-Mar-2012
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 393 - Equipment for storage tanks and for service stations
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Sep-2021
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 21-Mar-2012
- Effective Date
- 22-Sep-2021
- Effective Date
- 28-Jan-2026
- Refers
prEN 15116 - Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN ISO 1182:2020 - Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ABS Group Brazil
ABS Group certification services in Brazil.
Bureau Veritas Kuwait
Bureau Veritas certification services in Kuwait.
Bureau Veritas Nigeria
Bureau Veritas certification services in Nigeria.
Sponsored listings
Frequently Asked Questions
EN 13617-3:2012 is a standard published by the European Committee for Standardization (CEN). Its full title is "Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves". This standard covers: This European Standard specifies safety and environmental requirements for the construction and performance of shear valves to be fitted to metering pumps, dispensers, and/or satellite delivery systems installed at petrol filling stations and used to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l min-1. The requirements apply to shear valves at ambient temperatures from -20 °C to +40 °C with the possibility for an extended temperature range. It pays particular attention to mechanical and hydraulic characteristics. NOTE 1 This European Standard does not apply to equipment for use with liquefied petroleum gas (LPG) or liquefied natural gas (LNG) or compressed natural gas (CNG). NOTE 2 Fuels other than of Explosion Group IIA are excluded from this European Standard.
This European Standard specifies safety and environmental requirements for the construction and performance of shear valves to be fitted to metering pumps, dispensers, and/or satellite delivery systems installed at petrol filling stations and used to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l min-1. The requirements apply to shear valves at ambient temperatures from -20 °C to +40 °C with the possibility for an extended temperature range. It pays particular attention to mechanical and hydraulic characteristics. NOTE 1 This European Standard does not apply to equipment for use with liquefied petroleum gas (LPG) or liquefied natural gas (LNG) or compressed natural gas (CNG). NOTE 2 Fuels other than of Explosion Group IIA are excluded from this European Standard.
EN 13617-3:2012 is classified under the following ICS (International Classification for Standards) categories: 75.200 - Petroleum products and natural gas handling equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13617-3:2012 has the following relationships with other standards: It is inter standard links to EN 13617-3:2004, EN 13617-3:2021, EN 1127-1:2019, prEN 15116, EN 976-1:1997, EN ISO 1182:2020, EN 13617-1:2012, EN 13463-1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13617-3:2012 is associated with the following European legislation: EU Directives/Regulations: 2014/34/EU, 94/9/EC; Standardization Mandates: M/079. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13617-3:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bencinski servisi - 3. del: Varnostne zahteve za izdelavo in lastnosti varovalnih ventilovTankstellen - Teil 3: Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von AbscherventilenStations-service - Partie 3: Exigences de sécurité relatives à la construction et aux performances des raccords de sécuritéPetrol filling stations - Part 3: Safety requirements for construction and performance of shear valves75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 13617-3:2012SIST EN 13617-3:2012en,fr,de01-maj-2012SIST EN 13617-3:2012SLOVENSKI
STANDARDSIST EN 13617-3:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13617-3
March 2012 ICS 75.200 Supersedes EN 13617-3:2004English Version
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
Stations-service - Partie 3: Exigences de sécurité relatives à la construction et aux performances des raccords de sécurité
Tankstellen - Teil 3: Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von Abscherventilen This European Standard was approved by CEN on 28 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13617-3:2012: ESIST EN 13617-3:2012
Instructions Guide for items to be included in manufacturers' installation and user manual . 11Annex B (normative)
Test methods . 12B.1 General requirements . 12B.2 Pressure test (routine test) . 12B.3 Main valve test (routine test) . 12B.4 Pressure relief valve test (routine test) . 12B.5 Fuel preconditioning (type test) . 13B.6 Pressure test (type test) . 13B.7 Main valve test (type test) . 13B.8 Check valve test (class I only) (type test) . 13B.9 Pressure relief valve test (class I only) (type test) . 14B.10 Thermal link test 1 (class I and class II only) (type test and production acceptance test) . 14B.11 Thermal link test 2 (class I and class II only) (type test and production acceptance test) . 14B.12 Main valve closure test (type test and production acceptance test) . 14B.13 Main valve closure test (type test and production acceptance test) . 15Annex C (informative)
Environmental aspects . 16Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC . 18 SIST EN 13617-3:2012
Class I and II for liquid pressure systems, Class III for vapour systems only. 5.4 Threads Input and output threads shall be in accordance with ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...