2009/23/EC - Directive 2009/23/EC of the European Parliament and of the Council of 23 April 2009 on non-automatic weighing instruments
Directive 2009/23/EC of the European Parliament and of the Council of 23 April 2009 on non-automatic weighing instruments
Direktiva 2009/23/ES Evropskega parlamenta in Sveta z dne 23. aprila 2009 o neavtomatskih tehtnicah
2010-05-25 SJ: Codified version of 90/384/EC.
General Information
Frequently Asked Questions
An EU Directive is a legislative act of the European Union that sets out goals that all EU member states must achieve. However, it is up to each member state to devise their own laws on how to reach these goals through national transposition. Directives are used to harmonize laws across the EU, particularly for the functioning of the single market.
Directive 2009/23/EC covers "Directive 2009/23/EC of the European Parliament and of the Council of 23 April 2009 on non-automatic weighing instruments". There are 8 standards associated with this directive.
Harmonized standards under 2009/23/EC are European standards (ENs) developed by CEN, CENELEC, or ETSI in response to a mandate from the European Commission. When these standards are cited in the Official Journal of the European Union, products manufactured in conformity with them benefit from a presumption of conformity with the essential requirements of 2009/23/EC, facilitating CE marking and free movement within the European Economic Area.
This European Standard has been adapted from the OIML Recommendation R 76-1, Edition 2006, Non-automatic weighing instruments Part 1 - Metrological and technical requirements – Tests by a Joint Working Group from CEN and CENELEC. It was elaborated following a standardization request from the Commission of the European Communities to CEN and CENELEC to establish a European Standards related to Council Directive 2009/23/EC on Non-automatic weighing instruments.
- Standard142 pagesEnglish languagee-Library read for1 day
This European Standard has been adapted from the OIML Recommendation R 76-1, Edition 2006, Non-automatic weighing instruments Part 1 - Metrological and technical requirements – Tests by a Joint Working Group from CEN and CENELEC. It was elaborated following a standardization request from the Commission of the European Communities to CEN and CENELEC to establish a European Standards related to Council Directive 2009/23/EC on Non-automatic weighing instruments.
- Standard142 pagesEnglish languagee-Library read for1 day
This European Standard specifies the test methods for verification of vapour recovery systems at service stations (Stage II).
This European Standard does not specify the test method for the air and vapour tightness testing of the vapour recovery systems at service stations.
- Standard17 pagesEnglish languagee-Library read for1 day
This European Standard specifies the test methods for verification of vapour recovery systems at service stations (Stage II).
This European Standard does not specify the test method for the air and vapour tightness testing of the vapour recovery systems at service stations.
- Standard17 pagesEnglish languagee-Library read for1 day
- Standard106 pagesEnglish languagee-Library read for1 day
This European Standard specifies the metrological and technical requirements for non-automatic weighing instruments. It is intended to provide standardized requirements and testing procedures to evaluate the metrological and technical characteristics in a uniform and traceable way.
- Standard106 pagesEnglish languagee-Library read for1 day
- Standard106 pagesEnglish languagee-Library read for1 day
This European Standard specifies the metrological and technical requirements for non-automatic weighing instruments. It is intended to provide standardized requirements and testing procedures to evaluate the metrological and technical characteristics in a uniform and traceable way.
- Standard106 pagesEnglish languagee-Library read for1 day