EN 17391:2022
(Main)Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
This document specifies general requirements for in-service acoustic emission (AE) monitoring. It relates to detection, location and grading of AE sources with application to metallic pressure equipment and other structures such as bridges, bridge ropes, cranes, storage tanks, pipelines, wind turbine towers, marine applications, offshore structures. The monitoring can be periodic, temporary or continuous, on site or remote-controlled, supervised or automated. The objectives of AE monitoring are to define regions which are acoustically active as a result of damage or defect evolution.
Zerstörungsfreie Prüfung - Schallemissionsprüfung - Überwachung der Schallemission von metallischen Druckgeräten und -strukturen im Betrieb - Allgemeine Grundsätze
Dieses Dokument legt allgemeine Anforderungen an die Überwachung der Schallemission (AE) während des Betriebs fest. Es bezieht sich auf die Erkennung, Ortung und Klassifizierung von AE-Quellen von metallischen Druckgeräten und andere Konstruktionen, wie Brücken, Brückenseile, Krane, Lagertanks, Rohrleitungen, Windenergiemaste, Schiffe und Offshore-Bauwerke. Die Überwachung kann periodisch, temporär oder kon¬tinuierlich, vor Ort oder ferngesteuert, beaufsichtigt oder automatisiert erfolgen. Das Ziel der AE-Überwachung ist, Bereiche zu bestimmen, die aufgrund von Schäden oder Fehlerentwicklungen akustisch aktiv sind.
Essais non destructifs - Contrôle par émission acoustique - Surveillance en service par émission acoustique des équipements et structures métalliques sous pression - Exigences générales
Le présent document spécifie les exigences générales relatives à la surveillance en service par émission acoustique (EA). Il porte sur la détection, la localisation et le classement des sources d’EA, avec une application aux équipements sous pression et autres structures métalliques tels que ponts, câbles de pont, grues, réservoirs de stockage, pipelines, mâts d’éoliennes, applications maritimes, structures offshore. La surveillance peut être périodique, temporaire ou continue, sur site ou à distance, supervisée ou automatisée. Les objectifs de la surveillance par EA sont de définir les zones qui sont acoustiquement actives à la suite de l’évolution d’un dommage ou d’un défaut.
Neporušitvene preiskave - Akustična emisija - Nadzorovanje akustične emisije pri uporabi kovinske tlačne opreme in drugih kovinskih struktur - Splošne zahteve
Ta standard opisuje nadzorovanje akustične emisije (AE) za ugotavljanje, iskanje in razvrščanje virov akustične emisije pri uporabi kovinske tlačne opreme in drugih kovinskih struktur. Nadzorovanje je lahko periodično, začasno ali stalno; izvaja se lahko na kraju samem ali na daljavo, pod nadzorom ali avtomatizirano. Cilj nadzorovanja akustične emisije je določitev območij, ki so akustično aktivna zaradi nastanka škode ali napak v razvoju.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2022
Neporušitvene preiskave - Akustična emisija - Nadzorovanje akustične emisije pri
uporabi kovinske tlačne opreme in drugih kovinskih struktur - Splošne zahteve
Non-destructive testing - Acoustic emission testing - Inservice acoustic emission
monitoring of metallic pressure equipment and structures - General requirements
Zerstörungsfreie Prüfung - Schallemissionsprüfung - Überwachung der Schallemission
von metallischen Druckgeräten und -strukturen im Betrieb - Allgemeine Grundsätze
Essais non destructifs - Contrôle par émission acoustique - Surveillance en service par
émission acoustique des équipements et structures métalliques sous pression -
Exigences générales
Ta slovenski standard je istoveten z: EN 17391:2022
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17391
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2022
EUROPÄISCHE NORM
ICS 19.100
English Version
Non-destructive testing - Acoustic emission testing - In-
service acoustic emission monitoring of metallic pressure
equipment and structures - General requirements
Essais non destructifs - Contrôle par émission Zerstörungsfreie Prüfung - Schallemissionsprüfung -
acoustique - Surveillance en service par émission Überwachung der Schallemission von metallischen
acoustique des équipements et structures métalliques Druckgeräten und Strukturen im Betrieb - Allgemeine
sous pression - Exigences générales Grundsätze
This European Standard was approved by CEN on 5 March 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17391:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Personnel qualification . 6
5 Information prior to testing . 7
5.1 Structural information . 7
5.2 Operating conditions . 7
5.3 AE event mechanisms . 8
5.3.1 General. 8
5.3.2 Crack growth . 8
5.3.3 Corrosion . 9
5.3.4 Friction, fretting and cavitation erosion . 9
6 Monitoring methodology . 9
6.1 Periodic, temporary or continuous monitoring . 9
6.2 On-site or remote-controlled monitoring . 10
6.3 Supervised or automated monitoring . 11
7 Monitoring instrumentation . 11
7.1 System requirements . 11
7.2 Sensors and preamplifiers. 11
7.2.1 General requirements . 11
7.2.2 Frequency range (band width) . 12
7.2.3 Coupling agent . 13
7.2.4 Mounting method . 13
7.2.5 Temperature range, wave guide usage . 13
7.2.6 Use in explosive atmosphere . 13
7.2.7 Immersed sensors . 13
7.2.8 Integral electronics (amplifier, band-pass filter, RMS converter, ASL converter) . 13
7.2.9 Grounding . 14
7.2.10 External preamplifiers . 14
7.2.11 Sensor and preamplifier cables . 14
7.3 Portable AE equipment . 14
7.4 Single channel and multi-channel AE equipment . 14
7.5 Measured parameters . 14
7.5.1 Burst signal parameters . 14
7.5.2 Continuous signal parameters . 15
7.6 Verification of sensor sensitivity and coupling quality . 15
7.7 External parameters . 15
7.8 AE system . 15
7.9 Monitoring in hazardous areas . 16
8 Pre-monitoring measurements . 16
8.1 Wave propagation behaviour . 16
8.1.1 General. 16
8.1.2 Liquid or gas containment . 17
8.1.3 Wall thickness . 17
8.1.4 Geometry of the structure . 17
8.1.5 Insulation . 17
8.1.6 Surface preparation . 17
8.2 Background noise measurement . 17
8.2.1 Representative location . 17
8.2.2 Process noise . 18
8.2.3 Other disturbance noise . 18
8.2.4 Noise sampling period . 18
8.3 Sensitivity of AE monitoring using linear or planar location . 18
9 Monitoring procedure . 19
9.1 Sensor positioning . 19
9.2 External parameters . 19
9.3 Instrumentation verification . 19
9.4 Data acquisition and online filtering . 19
10 Data analysis . 20
10.1 General . 20
10.2 Online analysis . 20
10.3 Data processing . 20
10.3.1 General . 20
10.3.2 Background noise analysis . 20
10.3.3 Pre-location data analysis . 21
10.3.4 AE event location . 21
10.3.5 Cluster analysis . 22
10.3.6 Pattern recognition . 22
11 AE source interpretation and evaluation . 22
11.1 Interpretation of AE results . 22
11.2 Source evaluation criteria .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.