EN 13084-5:2005/AC:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Free-standing chimneys - Part 5: Material for brick liners - Product specificationsSURL]YRGCheminées autoportantes - Partie 5 : Matériaux pour conduits intérieurs en terre cuite - Spécification du produitFreistehende Industrieschornsteine - Teil 5: Baustoffe für Innenrohre aus Mauerwerk - ProduktfestlegungenTa slovenski standard je istoveten z:EN 13084-5:2005/AC:2006SIST EN 13084-5:2005/AC:2007en,fr,de91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:SLOVENSKI
STANDARDSIST EN 13084-5:2005/AC:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13084-5:2005/ACMay 2006Mai 2006Mai 2006ICS 91.060.40; 91.100.15English versionVersion FrançaiseDeutsche FassungFree-standing chimneys - Part 5: Material for brick liners - ProductspecificationsCheminées autoportantes - Partie 5 :Matériaux pour conduits intérieurs en terrecuite - Spécification du produitFreistehende Industrieschornsteine - Teil 5:Baustoffe für Innenrohre aus Mauerwerk -ProduktfestlegungenThis corrigendum becomes effective on 24 May 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 24 mai 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 24.Mai 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13084-5:2005/AC:2006 D/E/F

The Contents pages shall be modified as follows:
Contents
Page
Foreword ……………………………………………………………………………………………………………….…3 1 Scope………………….………………………………………………………………………………………….4 2 Normative references………………………………………………………………………………………….4 3 Terms and definitions………………………………………………………………………………………….5 4 Requirements for the liner…………………………………………………………………………………….5 4.1 General……………………………………………………………………………………………………………5 4.2 Performance characteristics………………………………………………………………………………….5 4.2.1 General……………………………………………………………………………………………………………5 4.2.2 Mechanical resistance and stability…………………………………………………………………………5 4.2.3 Compressive strength …………………………………………………………………………………………6 4.2.4 Flexural tensile strength ………………………………………………………………………………………6 4.2.5 Resistance to fire……………………………………………………………………………………………….6 4.2.6 Gas tightness……………………………………………………………………………………………………6 4.2.7 Flow resistance …………………………………………………………………………………………………6 4.2.8 Dimensioning / Thermal resistance …………………………………………………………………….….6 4.2.9 Thermal shock resistance …………………………………………………………………………………….6 4.2.10 Resistance to freeze-thaw …………………………………………………………………………………….6 4.2.11 Durability…………………………………………………………………………………………………………6 5 Materials………………………………………………………………………………………………………….7 5.1 Bricks…………………………………………………………………………………………………………….7 5.1.1 General …………………………………………………………………………………………………………7 5.1.2 Bricks Type BT1………………………………………………………………………………………………. 7 5.1.3 Bricks Type BT2(a) and BT(b).……………………………………………………………………………… 7 5.1.4 Bricks Type BT3……………………………………………………………………………………………….7 5.1.5 Bricks Type BT4………………………………………………………………………………………………. 7 5.1.6 Bricks Type BT5.………………………………………………………………………………………………7 5.2 Mortars …………………………………………………………………………………………………………11 5.2.1 General .……………………………………………………………………………………………………….11 5.2.2 Type MT1 Resin mortars…………………………………………………………………………………….11 5.2.3 Type MT2 Potassium silicate mortars…………………………………………………………………….11 5.2.4 Type MT3 Mortars based upon hydraulic cement……………………………………………………….11 6 Testing of materials ….………………………………………………………………………………………12 6.1 Bricks ………………………………………………………………………………………………………….12 6.1.1 General…………………………………………………………………………………………………………. 12 6.1.2 Bulk density…………………………………………………………………………………………………….12 6.1.3 Compressive strength……………………………………………………………………………………….12 6.1.4 Flexural tensile strength…………………………………………………………………………………….12 6.1.5 Water absorption………………………………………………………………………………………………12 6.1.6 Acid solubility………………………………………………………………………………………………….12 6.1.7 Resistance to temperature change………………………………………………………………………. 12 6.1.8 Tolerances……………………………………………………………………………………………………. 12 6.1.9 Resistance to freeze-thaw…………………………………………………………………………………. 13 6.2 Mortar…………………………………………………………………………………………………………. 13 6.2.1 General…………………………………………………………………………………………………………. 13 6.2.2 Bulk density…………………………………………………………………………………………………….13 6.2.3 Compressive strength……………………………………………………………………………………….13 6.2.4 Initial shear strength………………………………………………………………………………………….13 6.2.5 Water absorption………………………………………………………………………………………………13 6.2.6 Acid solubility………………………………………………………………………………………………….13 6.2.7 Resistance to temperature change…………………………………………………………………………13

Sampling and evaluation of tests for factory production control………………….24 A.1 Sampling — Evaluation………………………………………………………………………………………24 A.1.1 Bricks……………………………………………………………………………………………………………24 A.1.2 Mortars…………………………………………………………………………………………………………. 24 A.2 Acceptance criteria………………………………………………………………………………………….24 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive…………………………………………………………………………. 25
Figures
Figure 1: Compass brick………………………………………………………………………………………………14 Figure 2: Shaped radial block with continuous tongue and groove………………………………………….15 Figure 3: Tongue and groove…………………………………………………………………………………………16 Figure 4: Shaped slab with continuous tongue and groove…………………………………………………….18 Figure 5: Shaped corner blocks with continuous tongue and groove……………………………………….19 Figure 6: Shaped radial block with lateral tongue and groove…………………………………………………20 Figure ZA.1.1:
Example CE marking information………………………………………………………………. 30 Figure ZA.1.2:
Example CE marking information………………………………………………………………. 31
Tables
Table 1: Liner brickwork classes……………………………………………………………………………………. 5 Table 2: Physical and chemical requirements for brick types………………………………………………….8 Table 3: Tolerances of brick dimensions…………………………………………………………………………. 9 Table 4: Requirements for mortar types………………………………………………………………………….10 Table 5: Compass bricks…………………………………………………………………………………………….14 Table 6: Shaped radial blocks with continuous tongue and groove…………………………………………17 Table 7: Shaped slabs with continuous tongue and groove………………………………………………….18 Table 8: Shaped corner blocks with continuous tongue and groove……………………………………….19 Table 9: Shaped radial blocks with lateral tongue and groove……………………………………………….21 Table A.1
Sample size in relation to batch size for bricks………………….…………………………………24 Table A.2
Sample size in relation to batch size for mortars…………………………………………………. 24 Table ZA.1:
Relevant clauses for Materials for brick liners…………………………………………………. 26 Table ZA.2:
System of attestation of conformity………………………………………………………………. 27 Table ZA.3:
Assignment of evaluation of conformity tasks for Materials for brick liners under system 2+……………………………………………………………………………………………….27

Replace prEN 13084-7 by EN 13084-7 Replace ENV 1993-3-2 by EN 1993-3-2
Clause 2 Add the referenced document: EN 998-2, Specification for mortar for masonry — Part 2: Masonry mortar
4.2.6 Replace En in the 1st line by EN
5.2.4 Replace d), e), f) in the 5th paragraph by a), b), c) respectively
Table A.2 Replace in relation to batch size in the title by in relation to batch size for mortars
Table ZA.1 Replace S in the 1st row of column 4 by G
Table ZA.3 Delete: and resistance to wind load in the last but one row of column 4

Version française
Les pages du sommaire do
...