EN 12013:2000
(Main)Rubber and plastics machines - Internal mixers - Safety requirements
Rubber and plastics machines - Internal mixers - Safety requirements
This standard applies to internal mixers for rubber and plastics as defined in 3.1. The safety requirements and/or measures specified in this standard apply to all internal mixers irrespective of their size and irrespective of the control modes of the hopper front door and discharge door. The safety requirements for the design of exhaust systems and ancillary equipment are not covered by this standard. The safety requirements for the interaction between internal mixers and ancillary equipment are specified. This standard covers the significant hazards listed in Clause 4.
Gummi- und Kunststoffmaschinen - Innenmischer - Sicherheitsanforderungen
Diese Norm gilt für Innenmischer für Gummi und Kunststoff gemäß 3.1. Die Sicherheitsanforderungen und/oder -maßnahmen dieser Norm gelten für alle Innenmischer unabhängig von ihrer Größe und der Art der Betätigung der Einfüllklappe bzw. des Klapp- oder Schiebesattels. Die sicherheitstechnischen Anforderungen an die Gestaltung von Absaugsystemen oder von Zusatzeinrichtungen werden in dieser Norm nicht festgelegt. Die sicherheitstechnischen Anforderungen an das Zusammenwirken zwischen Innenmischern und Zusatzeinrichtungen werden festgelegt.
Machines pour le caoutchouc et les matières plastiques - Mélangeurs internes - Prescriptions de sécurité
La présente norme s'applique aux mélangeurs internes utilisés pour le caoutchouc et les matières plastiques qui sont définis en 3.1. Les exigences et/ou mesures de sécurité spécifiées dans la présente norme s'appliquent à tous les mélangeurs internes quels que soient leur taille et le mode de commande des portes de chargement et de déchargement. Les exigences de sécurité relatives à la conception des systèmes d'aspiration et des équipements auxiliaires ne sont pas spécifiées dans la présente norme.
Rubber and plastics machines - Internal mixers - Safety requirements
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jun-2000
- Withdrawal Date
- 08-Jul-2008
- Technical Committee
- CEN/TC 145 - Rubber and plastics machines - Safety
- Drafting Committee
- CEN/TC 145 - Rubber and plastics machines - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 09-Jul-2008
- Completion Date
- 09-Jul-2008
- Directive
- 98/37/EC - Machinery
Relations
- Merged Into
EN 12013:2000+A1:2008 - Plastics and rubber machines - Internal mixers - Safety requirements - Effective Date
- 19-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 12013:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber and plastics machines - Internal mixers - Safety requirements". This standard covers: This standard applies to internal mixers for rubber and plastics as defined in 3.1. The safety requirements and/or measures specified in this standard apply to all internal mixers irrespective of their size and irrespective of the control modes of the hopper front door and discharge door. The safety requirements for the design of exhaust systems and ancillary equipment are not covered by this standard. The safety requirements for the interaction between internal mixers and ancillary equipment are specified. This standard covers the significant hazards listed in Clause 4.
This standard applies to internal mixers for rubber and plastics as defined in 3.1. The safety requirements and/or measures specified in this standard apply to all internal mixers irrespective of their size and irrespective of the control modes of the hopper front door and discharge door. The safety requirements for the design of exhaust systems and ancillary equipment are not covered by this standard. The safety requirements for the interaction between internal mixers and ancillary equipment are specified. This standard covers the significant hazards listed in Clause 4.
EN 12013:2000 is classified under the following ICS (International Classification for Standards) categories: 83.200 - Equipment for the rubber and plastics industries. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12013:2000 has the following relationships with other standards: It is inter standard links to EN 12013:2000+A1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12013:2000 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12013:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
Rubber and plastics machines - Internal mixers - Safety requirements
Rubber and plastics machines - Internal mixers - Safety requirements
Gummi- und Kunststoffmaschinen - Innenmischer - Sicherheitsanforderungen
Machines pour le caoutchouc et les matieres plastiques - Mélangeurs internes -
Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 12013:2000
ICS:
83.200 Oprema za gumarsko Equipment for the rubber and
industrijo in industrijo plastics industries
polimernih materialov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...