prEN 4902
(Main)Aerospace series - Surface treatments - Definitions and test methods
Aerospace series - Surface treatments - Definitions and test methods
This document specifies definitions to be used in documents related to surface treatments and test methods that can be referred by surface treatment standards.
Luft- und Raumfahrt - Oberflächenbehandlungen - Definitionen und Prüfverfahren
No Scope available
Série aérospatiale - Traitements de surface - Définitions et méthodes d'essais
Le présent document spécifie les définitions à utiliser dans les documents liés aux traitements de surface et aux méthodes d’essais qui peuvent être cités en référence par les normes de traitement de surface.
Aeronavtika - Površinske prevleke - Definicije in preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Aeronavtika - Površinske prevleke - Definicije in preskusne metode
Aerospace series - Surface treatments - Definitions and test methods
Luft- und Raumfahrt - Oberflächenbehandlungen - Definitionen und Prüfverfahren
Ta slovenski standard je istoveten z: prEN 4902
ICS:
01.040.49 Letalska in vesoljska tehnika Aircraft and space vehicle
(Slovarji) engineering (Vocabularies)
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 49.040; 01.040.49
English Version
Aerospace series - Surface treatments - Definitions and
test methods
Luft- und Raumfahrt - Oberflächenbehandlungen -
Definitionen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4902:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Test methods . 5
European foreword
This document (prEN 4902:2021) has been prepared by the Aerospace and Defence
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.