EN 14785:2006
(Main)Residential space heating appliances fired by wood pellets - Requirements and test methods
Residential space heating appliances fired by wood pellets - Requirements and test methods
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emissions), instructions and marking together with associated test methods and test fuels for type-testing residential space heaters fired by wood pellets, and mechanically fed up to 50 kW nominal heat output.
These appliances may be freestanding or inset appliances and provide heat into the space where they are installed and may be operated with either natural draught or fan-assisted combustion air. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances burn wood pellets only, in accordance with the appliance manufacturer's instructions. They operate with firedoors closed only.
Non mechanically fed appliances burning solid mineral fuels, peat briquettes and natural or manufactured wood logs are not included in this European Standard, but are covered by EN 13229 and EN 13240.
NOTE These appliances may have an integral fuel hopper or be combined with an external fuel hopper.
Raumheizer zur Verfeuerung von Holzpellets - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen an Auslegung, Herstellung, Ausführung, Sicherheit und Leistungsvermögen (Wirkungsgrad und Emission), Anleitung und Kennzeichnung zusammen mit zugehörigen Prüfverfahren und Prüfbrennstoffen für die Typprüfung von Raumheizern für Holzpellets mit einer Nennwärmeleistung bis 50 kW fest, die mechanisch beschickt werden.
Diese Feuerstätten dienen der Raumheizung, gegebenenfalls auch der Brauchwassererzeugung. Sie können mit natürlichem Förderdruck oder mit gebläseunterstützter Verbrennungsluftzufuhr betrieben werden. Sofern sie mit wasserführenden Bauteilen ausgestattet sind, beheizen sie auch Heizwasser und/oder Brauchwasser. Diese Feuerstätten können entsprechend der Bedienungsanleitung des Herstellers Holzpellets nur mit geschlossenen Feuerraumtüren verfeuern.
Nicht mechanisch beschickte Feuerstätten für feste mineralische Brennstoffe, Torfbriketts, Holzscheite und Holzbriketts sind nicht Gegenstand dieser Europäischen Norm, diese werden behandelt in der EN 13229 und EN 13240.
ANMERKUNG Sie können mit einem integrierten oder externen Füllraum für Brennstoff ausgestattet sein.
Appareils de chauffage domestique à convection à granulés de bois - Exigences et méthodes d'essai
La présente Norme européenne définit les exigences relatives à la conception, à la fabrication, à l’assemblage,
à la sécurité, aux performances (rendement et émissions), aux instructions et au marquage ainsi que les
méthodes et combustibles correspondants pour les essais des appareils de chauffage domestiques à
granulés de bois et à alimentation mécanique d'une puissance calorifique nominale allant jusqu'à 50 W.
Ces appareils peuvent être indépendants ou encastrés et fournissent de la chaleur dans l'espace où ils sont
installés ; ils peuvent fonctionner en tirage naturel ou être équipés d'un ventilateur pour l'alimentation en air de
combustion. De plus, lorsqu’ils sont équipés d'une chaudière, ils fournissent également de l’eau chaude
sanitaire et/ou du chauffage central. Ces appareils utilisent le granulé de bois uniquement, conformément aux
instructions du fabricant de l'appareil. Ils fonctionnent uniquement avec des portes de foyer fermées.
La présente Norme européenne ne traite pas des appareils dépourvus d’alimentation mécanique qui utilisent
des combustibles minéraux solides, des briquettes de tourbe et des bûches de bois naturelles ou
reconstituées ; ces appareils font l'objet des normes EN 13229 et EN 13240.
NOTE Ces appareils peuvent comporter une trémie d’alimentation intégrée ou être combinés avec une trémie
d’alimentation externe.
Naprave za gretje stanovanjskih prostorov na lesne pelete - Zahteve in preskusne metode
General Information
- Status
- Withdrawn
- Publication Date
- 06-Jun-2006
- Withdrawal Date
- 13-Apr-2025
- Technical Committee
- CEN/TC 295 - Residential solid fuel burning appliances
- Drafting Committee
- CEN/TC 295/WG 2 - Roomheaters
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Dec-2022
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 23-Feb-2022
Frequently Asked Questions
EN 14785:2006 is a standard published by the European Committee for Standardization (CEN). Its full title is "Residential space heating appliances fired by wood pellets - Requirements and test methods". This standard covers: This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emissions), instructions and marking together with associated test methods and test fuels for type-testing residential space heaters fired by wood pellets, and mechanically fed up to 50 kW nominal heat output. These appliances may be freestanding or inset appliances and provide heat into the space where they are installed and may be operated with either natural draught or fan-assisted combustion air. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances burn wood pellets only, in accordance with the appliance manufacturer's instructions. They operate with firedoors closed only. Non mechanically fed appliances burning solid mineral fuels, peat briquettes and natural or manufactured wood logs are not included in this European Standard, but are covered by EN 13229 and EN 13240. NOTE These appliances may have an integral fuel hopper or be combined with an external fuel hopper.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emissions), instructions and marking together with associated test methods and test fuels for type-testing residential space heaters fired by wood pellets, and mechanically fed up to 50 kW nominal heat output. These appliances may be freestanding or inset appliances and provide heat into the space where they are installed and may be operated with either natural draught or fan-assisted combustion air. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances burn wood pellets only, in accordance with the appliance manufacturer's instructions. They operate with firedoors closed only. Non mechanically fed appliances burning solid mineral fuels, peat briquettes and natural or manufactured wood logs are not included in this European Standard, but are covered by EN 13229 and EN 13240. NOTE These appliances may have an integral fuel hopper or be combined with an external fuel hopper.
EN 14785:2006 is classified under the following ICS (International Classification for Standards) categories: 97.100.30 - Solid fuel heaters. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14785:2006 has the following relationships with other standards: It is inter standard links to EN 16510-2-6:2022. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14785:2006 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/129. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14785:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Residential space heating appliances fired by wood pellets - Requirements and test methodsNaprave za gretje stanovanjskih prostorov na lesne pelete - Zahteve in preskusne metodeAppareils de chauffage domestique a convection a granulés de bois - Exigences et méthodes d'essaiRaumheizer zur Verfeuerung von Holzpellets - Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14785:2006SIST EN 14785:2006en,fr,de97.100.30ICS:SLOVENSKI
STANDARDSIST EN 14785:200601-november-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14785June 2006ICS 97.100.30 English VersionResidential space heating appliances fired by wood pellets -Requirements and test methodsAppareils de chauffage domestique à convection àgranulés de bois - Exigences et méthodes d'essaiRaumheizer zur Verfeuerung von Holzpellets -Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 3 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14785:2006: E
Test methods.34 A.1 Test environment.34 A.1.1 Ambient room temperature.34 A.1.2 Cross-draught.34 A.1.3 External sources.34 A.2 Test assembly.34 A.2.1 General.34 A.2.2 Trihedron.35 A.2.3 Measurement section.35 A.2.4 Connection of appliance to measurement section.36 A.2.5 Water circuit for appliances with boilers.37 A.3 Measurement equipment.37 A.4 Test procedures.38 A.4.1 Appliance installation.38 A.4.2 Calculation of fuel load.38 A.4.3 Fuelling and de-ashing the fire.38 A.4.4 Flue gas losses.38 A.4.5 Water heating output.39 A.4.6 Combustible heat losses in the residue.39 A.4.7 Performance test at nominal heat output.39 A.4.8 Reduced heat output test.41 A.4.9 Safety tests.42 A.5 Test results.44 A.6 Calculation methods.45 A.6.1 Notations and units used.45 A.6.2 Formulae.46 A.7 Test report.49 Annex B (normative)
Test fuels and recommended fuels.62 B.1 General.62 B.2 Test fuel.62 B.2.1 Selection of test fuel.62
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.66 ZA.1 Scope and relevant characteristics.66 ZA.2 Procedure for attestation of conformity of residential space heating appliances fired by wood pellets.68 ZA.2.1 System of attestation of conformity.68 ZA.2.2 EC Certificate and Declaration of conformity.69 ZA.3
CE marking and labelling.70 Bibliography.72
Part 1: Dimension, tolerances and designation (ISO 228-1:2000)
Part 2: Verification by means of limit gauges (ISO 228-2:1987) ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads —
Part 1: Dimensions, tolerances and designation ISO 334:1992, Solid mineral fuels — Determination of total sulfur — Eschka method ISO 351:1996, Solid mineral fuels — Determination of total sulfur — High temperature combustion method ISO 501:2003, Hard coal — Determination of the crucible swelling number ISO 562:1998, Hard coal and coke — Determination of volatile matter ISO 609:1996, Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method ISO 687:2004, Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample ISO 1171:1997, Solid mineral fuels — Determination of ash ISO 1928:1995, Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value ISO 2859 (all parts), Sampling procedures for inspection by attributes 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Appliances 3.1.1 appliance with boiler heat generator consisting of a room heating component and a water heating component in one unit 3.1.2 continuous burning appliance heating appliance designed to provide a source of heat by continuous burning and meeting the requirement of the slow combustion test 3.1.3 fireplace recess space formed in a wall or chimney breast constructed from non combustible materials, into which a heating appliance may be installed and from which a chimney flue leads 3.1.4 fireplace enclosure assembly consisting of walls and ceiling of non-combustible materials which is built on site to surround a heat generator and heat exchanger and to form a space from which hot convection air is emitted into the living space e.g. by means of air grilles 3.1.5 freestanding appliance appliance designed to operate without the need to be built into a fireplace recess or fireplace enclosure and which is not connected to the building except by the flue gas connector
DD 12 1.0398
DD 13 1.0335
DD 14 1.0389
EN 10025 S235JR 1.0037
S235JRG2 1.0038
S235JO 1.0114
S235J2G3 1.0116
S275JR 1.0044
S275JO 1.0143
S275J2G3 1.0144
S355JR 1.0045
S355JO 1.0553
S355J2G3 1.0570
S355K2G3 1.0595
EN 10028-2: P235GH 1.0345
P265GH 1.0425
P295GH 1.0481
P355GH 1.0473
16Mo3 1.5415
13CrMo4-5 1.7335
10CrMo9-10 1.7380
10CrMo9-10 1.7383
EN 10120 P245NB 1.0111
P265NB 1.0423
P310NB 1.0437
P355NB 1.0557
EN 10088-2 X5CrNi18-10 1.4301
X6CrNi17-12-2 1.4401
X6CrNiTi18-10 1.4541
X6CrNiNb18-10 1.4550
X6CrNiMoTi 17-12-2 1.4571
X6CrNiMoNb17-12-2 1.4580
X3CrNiMo17-13-3 1.4436 NOTE
Materials and wall thicknesses other than those specified may only be used on production of appropriate evidence as regards at lea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...