EN 843-1:1995
(Main)Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength
This part of EN 843 describes methods for determining the nominal flexural strength of advanced monolithic technical ceramic materials at ambient temperature. The available loading geometries are three- and four-point flexure,using rectangular section test-pieces of two prescribed geometries: 20 mm support span (A) and 40 mm support span (B). The test prescribes four categoriesof surface finish applied to the test-pieces.
Hochleistungskeramik - Monolithische Keramik - Mechanische Eigenschaft bei Raumtemperatur - Teil 1: Bestimmung der Biegefestigkeit
Dieser Teil der EN 843 beschreibt Verfahren zur Bestimmung der nominalen Biegefestigkeit von monolithischen keramischen Hochleistungswerkstoffen bei Raumtemperatur. Die möglichen Belastungsanordnungen sind die Drei-Punkt-Biegung und die Vier-Punkt-Biegung. Verwendet werden Proben mit rechteckigem Querschnitt mit den beiden nachfolgend beschriebenen Abmessungen 20 mm Auflagerabstand (A) und 40 mm Auflagerabstand (B). Dieses Verfahren ist anwendbar für Werkstoffe, deren mittlere Korngrösse kleiner als 200 um ist.
Céramiques techniques avancées - Céramiques monolithiques - Propriétés mécaniques à température ambiante - Partie 1: Détermination de la résistance en flexion
La présente partie de l'EN 843 décrit des méthodes pour la détermination de la résistance nominale à la flexion des céramiques techniques avancées à température ambiante. Les modes de mise en charge les plus courants sont de type flexion 3 points et flexion 4 points utilisant des éprouvettes de section rectangulaire avec deux types de configuration A et B, dont les distances entre appuis externes sont respectivement de 20 mm et 40 mm. L'essai prescrit quatre catégories d'état de surface d'éprouvettes.
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength
General Information
- Status
- Withdrawn
- Publication Date
- 08-Jan-1995
- Withdrawal Date
- 12-Dec-2006
- Technical Committee
- CEN/TC 184 - Advanced technical ceramics
- Drafting Committee
- CEN/TC 184/WG 3 - Monolithic ceramics
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 13-Dec-2006
- Completion Date
- 13-Dec-2006
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 843-1:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength". This standard covers: This part of EN 843 describes methods for determining the nominal flexural strength of advanced monolithic technical ceramic materials at ambient temperature. The available loading geometries are three- and four-point flexure,using rectangular section test-pieces of two prescribed geometries: 20 mm support span (A) and 40 mm support span (B). The test prescribes four categoriesof surface finish applied to the test-pieces.
This part of EN 843 describes methods for determining the nominal flexural strength of advanced monolithic technical ceramic materials at ambient temperature. The available loading geometries are three- and four-point flexure,using rectangular section test-pieces of two prescribed geometries: 20 mm support span (A) and 40 mm support span (B). The test prescribes four categoriesof surface finish applied to the test-pieces.
EN 843-1:1995 is classified under the following ICS (International Classification for Standards) categories: 81.060.99 - Other standards related to ceramics. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 843-1:1995 has the following relationships with other standards: It is inter standard links to EN 843-1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 843-1:1995 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/90/4. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 843-1:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at
room temperature - Part 1: Determination of flexural strength
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room
temperature - Part 1: Determination of flexural strength
Hochleistungskeramik - Monolithische Keramik - Mechanische Eigenschaft bei
Raumtemperatur - Teil 1: Bestimmung der Biegefestigkeit
Céramiques techniques avancées - Céramiques monolithiques - Propriétés mécaniques
a température ambiante - Partie 1: Détermination de la résistance en flexion
Ta slovenski standard je istoveten z: EN 843-1:1995
ICS:
81.060.30 Sodobna keramika Advanced ceramics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...