iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 658-1:1998

(Main)

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties

This part of EN 658 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement at ambient temperature. This standard applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D) and tridirectional (xD, with 2

Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei Raumtemperatur - Teil 1: Bestimmung der Eigenschaften unter Zug

Céramiques techniques avançées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 1: Détermination des caractéristiques en traction

Cette partie de l'EN 658 prescrit les conditions de détermination des propriétés en traction des matériaux composites à matrice céramique et à renfort continu à la température ambiante. Cette norme s'applique à tous les composites à matrice céramique à renfort fibreux continu, unidirectionnels (1D), bidirectionnels (2D), et tridirectionnels (xD, avec 2

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties

General Information

Status
Published
Publication Date
16-Jun-1998
ICS
81.060.99 - Other standards related to ceramics
Technical Committee
CEN/TC 184 - Advanced technical ceramics
Drafting Committee
CEN/TC 184/SC 1 - Ceramic composites
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2024
Completion Date
02-Dec-2024
Mandate
M/BC/CEN/90/4 - Request concerning the realisation of a standardization programme in the field of advanced technical ceramics
Ref Project
SIST EN 658-1:2000 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties

Buy Standard

EN 658-1:2000EN 658-1:2000
PreviousNext
Standard
EN 658-1:2000
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2000
Advanced technical ceramics - Mechanical properties of ceramic composites at
room temperature - Part 1: Determination of tensile properties
Advanced technical ceramics - Mechanical properties of ceramic composites at room
temperature - Part 1: Determination of tensile properties
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei Raumtemperatur - Teil 1: Bestimmung der Eigenschaften unter
Zug
Céramiques techniques avançées - Propriétés mécaniques des céramiques composites
a température ambiante - Partie 1: Détermination des caractéristiques en traction
Ta slovenski standard je istoveten z: EN 658-1:1998
ICS:
81.060.30 Sodobna keramika Advanced ceramics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 820-2:2003(Main)
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation
SIST EN 820-2:2004

This European Standard specifies a method for the determination of the temperature at which the self-loaded deformation of a ceramic test piece commences and the extent of this deformation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 820-2:2003(Main)
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation
SIST EN 820-2:2004

This European Standard specifies a method for the determination of the temperature at which the self-loaded deformation of a ceramic test piece commences and the extent of this deformation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18034:2024(Main)
Algae and algae products - Methods of sampling and analysis - Determination of chlorophyll a content
kSIST FprEN 18034:2024

This document specifies a laboratory method for the determination of chlorophyll a content in algae. The method was initially tested and evaluated on the microalgae species Nannochloropsis sp. and a heat treated algal product tomato soup with Nannochloropsis sp. supplement, and the macro algae species Ulva sp., Furcellaria lumbricalis, and Saccharina latissima. During an Interlaboratory Trial the method was tested on the microalgae species Nannochloropsis sp. and the macro algae species Saccharina latissima. The microalgae species Nannochloropsis sp. and Phaodactlylum sp. and the macro algae species Ulva sp. and Saccharina latissima were tested in a Round Robin test. This document is only validated for chlorophyll a, but it can be used for other chlorophylls as well.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12522:2024(Main)
Furniture removal activities - Furniture removal for private individuals - Service specification
kSIST FprEN 12522:2024

This document specifies the requirements for a furniture removal service and its provision and the general terms and conditions of contract subject always to any applicable national legislation, licensing or contractual constraints.
This document applies only to furniture removal services for private individuals where the contract is entered into by an individual or by an employer or relocation agent when the latter requires the moving of personal property, generally consisting of non-commercial property and/or property which is in current use.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12122:2024(Main)
Chemicals used for treatment of water intended for human consumption - Ammonia solution
kSIST FprEN 12122:2024

This document is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonia solution and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also provides basic information relating to safe handling and use of ammonia solution (see Annex B).

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 6059-203:2024(Main)
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 203: Coverage
kSIST FprEN 6059-203:2024

This document specifies methods for measuring and calculating the coverage of protection sleeves for electrical cables and cable bundles. It is presupposed to be used together with EN 6059 100.

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13695:2024(Main)
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2024)
oSIST prEN ISO 13695:2024

This document specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. This document is applicable to both continuous wave (cw) and pulsed laser beams. The dependence of the spectral characteristics of a laser on its operating conditions may also be important.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1302:2024(Main)
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods
kSIST FprEN 1302:2024

This document is applicable to aluminium-based coagulants used for treatment of water intended for human consumption. It specifies analytical methods to be used for products described in EN 878, EN 882, EN 885, EN 886, EN 887, EN 935 and EN 17034.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17660-2:2024(Main)
Air quality - Performance evaluation of air quality sensor systems - Part 2: Particulate matter in ambient air
SIST-TS CEN/TS 17660-2:2025

This document specifies the general principles, including testing procedures and requirements, for the classification of performance of low-cost sensor systems for the monitoring of particulate matter in ambient air at fixed sites. The classification of sensor systems includes tests that are performed under prescribed conditions. It does not guarantee performance in locations that are different from the tests, variations in meteorological climate from the test programme or account for stability over time, which can only be assessed under ongoing quality control strategies.
The described procedure is applicable to the determination of the mass concentration of particulate matter. The pollutants that are considered in this document are PM10 and PM2,5 in the range of concentrations expected in ambient air.
This document provides a classification that is consistent with the requirements for indicative measurements and objective estimation defined in Directive 2008/50/EC. In addition, it provides a classification for applications (non-regulatory measurements) that require more relaxed performance criteria.
This document applies to sensor systems used as individual systems. It does not apply to sensor systems as part of a sensor network. However, for some applications (e.g. in cities) sensor systems are deployed as part of a sensor network. Annex A provides information on the use of sensor systems as nodes in a sensor network.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13947:2024(Main)
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2024)
kSIST FprEN ISO 13947:2024

This document specifies a metallographic test method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. This test method is applicable to repress powder-forged test specimens in which there has been minimal lateral flow (<1 %). The core region of the powder-forged test specimen must not contain porosity detectable at 100x magnification.
This test method can also be applied to determine the non-metallic inclusion content of powder-forged steel parts. However, in parts where there has been a significant amount of material flow, the near-neighbour separation distance needs to be changed, or the inclusion sizes agreed between the parties need to be adjusted.
This test method is not applicable for determining the non-metallic inclusion level of parts that have been forged such that the core region contains porosity. At the magnification used for this test method, residual porosity is hard to distinguish from inclusions. Too much residual porosity makes a meaningful assessment of the inclusion population impossible.
This test method can also be applied to materials that contain manganese sulphide (admixed or prealloyed), provided the near-neighbour separation distance is changed from 30 µm to 15 µm.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day