EN 10228-4:1999
(Main)Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
This Part of EN 10228 specifies methods for the manual, pulse-echo, ultrasonic testing of forgings manufactured from austenitic and austenitic-ferritic stainless steels. Mechanised scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier.
Zerstörungsfreie Prüfung von Schmiedestücken aus Stahl - Teil 4: Ultraschallprüfung von Schmiedestücken aus austenitischem und austenitisch-ferritischem nichtrostenden Stahl
Dieser Teil der EN 10228 legt die Methodik für die manuelle Ultraschall-Impuls-Echo-Prüfung von Schmiedestücken, die aus austenitischen oder austenitisch-ferritischen nicht rostenden Stählen gefertigt sind, fest. Mechanisierte Abtastverfahren wie die Tauchprüfung dürfen angewendet werden; dar~uber sollte jedoch eine Vereinbarung zwischen Besteller und Lieferer getroffen werden.
Essais non destructifs des pièces forgées en acier - Partie 4: Contrôle par ultrasons des pièces forgées en aciers inoxydables austénitiques et austéno-ferritiques
La présente partie de l'EN 10228 spécifie les méthodes de contrôle par ultrasons des pièces forgées en aciers austénitiques et austéno-ferritiques manuelles ou par réflexion. Les méthodes de balayage automatisées telles que l'essai par immersion peuvent être également utilisées mais après accord entre fournisseur et acheteur.
Neporušitveno preskušanje jeklenih izkovkov - 4. del: Ultrazvočno preskušanje avstenitnih in avstenitno-feritnih nerjavnih jeklenih izkovkov
General Information
- Status
- Withdrawn
- Publication Date
- 17-Aug-1999
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ECISS/TC 111 - Steel castings and forgings
- Drafting Committee
- ECISS/TC 28/WG 1 - Steel forgings - Non destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jun-2016
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 08-Jun-2016
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10228-4:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings". This standard covers: This Part of EN 10228 specifies methods for the manual, pulse-echo, ultrasonic testing of forgings manufactured from austenitic and austenitic-ferritic stainless steels. Mechanised scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier.
This Part of EN 10228 specifies methods for the manual, pulse-echo, ultrasonic testing of forgings manufactured from austenitic and austenitic-ferritic stainless steels. Mechanised scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier.
EN 10228-4:1999 is classified under the following ICS (International Classification for Standards) categories: 77.040.20 - Non-destructive testing of metals; 77.140.85 - Iron and steel forgings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10228-4:1999 has the following relationships with other standards: It is inter standard links to EN 10228-4:2016, EN ISO 5577:2025, EN ISO 22232-2:2020, EN ISO 16811:2025, EN ISO 22232-1:2020, EN ISO 22232-3:2020, EN ISO 2400:2025, EN ISO 16827:2025, EN 14141:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10228-4:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10228-4:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Schmiedestücken aus Stahl - Teil 4: Ultraschallprüfung von Schmiedestücken aus austenitischem und austenitisch-ferritischem nichtrostenden StahlEssais non destructifs des pieces forgées en acier - Partie 4: Contrôle par ultrasons des pieces forgées en aciers inoxydables austénitiques et austéno-ferritiquesNon-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings77.140.85Železni in jekleni kovani izdelkiIron and steel forgings77.040.20Neporušitveno preskušanje kovinNon-destructive testing of metalsICS:Ta s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...