EN ISO 22232-1:2020
(Main)Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
This document specifies methods and acceptance criteria within the frequency range of 0,5 MHz to 15 MHz, for assessing the electrical performance of digital ultrasonic instruments for pulse operation using A-scan display, for manual ultrasonic non-destructive testing with single- or dual-transducer probes. This document is also applicable for multi-channel instruments. This document can partly be applicable to ultrasonic instruments in automated systems, but other tests can be needed to ensure satisfactory performance.
This document excludes ultrasonic instruments for continuous waves.
This document also excludes ultrasonic phased array instruments, see e.g. ISO 18563-1. If a phased array instrument has dedicated connectors for single- or dual-transducer probes this document is applicable for these channels.
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung - Teil 1: Prüfgeräte (ISO 22232-1:2020)
Dieses Dokument legt Verfahren und Zulässigkeitskriterien im Frequenzbereich von 0,5 MHz bis 15 MHz fest, mit denen die elektrische Leistungsfähigkeit von digitalen Ultraschallgeräten für Impulsbetrieb mit A Bild Darstellung, für die manuelle zerstörungsfreie Ultraschallprüfung mit Einzelschwinger Prüfköpfen oder Prüfköpfen mit getrennten Wandlern bewertet wird. Dieses Dokument gilt auch für Mehr¬kanal Prüfgeräte. Teile dieses Dokuments können für Ultraschallgeräte in automatisierten Prüfanlagen herangezogen werden, wobei jedoch weitere Prüfungen erforderlich sein können, um eine zufriedenstellende Leistung sicherzustellen.
Dieses Dokument schließt Ultraschallgeräte für Dauerschall aus.
Dieses Dokument schließt ebenfalls Ultraschallgeräte mit phasengesteuerten Arrays aus, siehe z. B. ISO 18563 1. Wenn ein Prüfgerät mit phasengesteuerten Arrays über fest zugeordnete Anschlüsse für Einzelschwinger Prüfköpfe oder Prüfköpfe mit getrennten Wandlern verfügt, ist dieses Dokument für diese Kanäle anwendbar.
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 1: Appareils (ISO 22232-1:2020)
Le présent document spécifie les méthodes et les critères d'acceptation dans une gamme de fréquences de 0,5 MHz à 15 MHz permettant d'évaluer les performances électriques des appareils numériques de contrôle par ultrasons à impulsions utilisant une représentation de type A, pour effectuer des contrôles non destructifs manuels par ultrasons avec des traducteurs à transducteur simple ou à émetteur et récepteur séparés. Le présent document s'applique également aux appareils multivoies. Le présent document peut en partie s'appliquer aux appareils de contrôle par ultrasons utilisés dans les systèmes automatisés, mais d'autres essais peuvent alors être nécessaires afin de garantir des performances satisfaisantes.
Le présent document exclut les appareils de contrôle par ultrasons à ondes continues.
Le présent document exclut également les appareils de contrôle par ultrasons en multiéléments; voir, par exemple, l'ISO 18563‑1. Si un appareil à ultrasons en multiéléments est équipé de connecteurs dédiés à des traducteurs à transducteur simple ou à émetteur et récepteur séparés, le présent document s'applique à ces voies.
Neporušitvene preiskave - Ugotavljanje značilnosti in overjanje naprav za ultrazvočno preskušanje - 1. del: Aparati (ISO 22232-1:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2020
Nadomešča:
SIST EN 12668-1:2011
Neporušitvene preiskave - Ugotavljanje značilnosti in overjanje naprav za
ultrazvočno preskušanje - 1. del: Aparati (ISO 22232-1:2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment -
Part 1: Instruments (ISO 22232-1:2020)
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-
Prüfausrüstung - Teil 1: Prüfgeräte (ISO 22232-1:2020)
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par
ultrasons - Partie 1: Appareils (ISO 22232-1:2020)
Ta slovenski standard je istoveten z: EN ISO 22232-1:2020
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 22232-1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2020
EUROPÄISCHE NORM
ICS 19.100 Supersedes EN 12668-1:2010
English Version
Non-destructive testing - Characterization and verification
of ultrasonic test equipment - Part 1: Instruments (ISO
22232-1:2020)
Essais non destructifs - Caractérisation et vérification Zerstörungsfreie Prüfung - Charakterisierung und
de l'appareillage de contrôle par ultrasons - Partie 1: Verifizierung der Ultraschall-Prüfausrüstung - Teil 1:
Appareils (ISO 22232-1:2020) Prüfgeräte (ISO 22232-1:2020)
This European Standard was approved by CEN on 4 July 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22232-1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 22232-1:2020) has been prepared by Technical Committee ISO/TC 135 "Non-
destructive testing" in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12668-1:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22232-1:2020 has been approved by CEN as EN ISO 22232-1:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 22232-1
First edition
2020-07
Non-destructive testing —
Characterization and verification of
ultrasonic test equipment —
Part 1:
Instruments
Essais non destructifs — Caractérisation et vérification de
l'appareillage de contrôle par ultrasons —
Partie 1: Appareils
Reference number
ISO 22232-1:2020(E)
©
ISO 2020
ISO 22232-1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 22232-1:2020(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 3
5 General requirements of conformity . 4
6 Manufacturer’s technical specification for ultrasonic instruments .4
7 Performance requirements for ultrasonic instruments . 7
8 Group 1 tests . 9
8.1 Equipment required for group 1 tests . 9
8.2 Battery operational time . 9
8.2.1 Procedure . 9
8.2.2 Acceptance criterion .10
8.3 Stability after warm-up time .10
8.3.1 Procedure .10
8.3.2 Acceptance criteria .10
8.4 Stability against temperature .10
8.4.1 Procedure .10
8.4.2 Acceptance criterion .12
8.5 Stability against voltage variation .12
8.5.1 Procedure .12
8.5.2 Acceptance criterion .13
8.6 Time base deviation .13
8.6.1 Procedure .13
8.6.2 Acceptance criterion .15
8.7 Transmitter pulse parameters .15
8.7.1 General.15
8.7.2 Pulse repetition frequency .15
8.7.3 Effective output impedance .15
8.8 Receiver .16
8.8.1 General.16
8.8.2 Cross talk from transmitter to receiver during transmission .16
8.8.3 Dead time after transmitter pulse .17
8.8.4 Dynamic range and maximum input voltage.19
8.8.5 Receiver input impedance .20
8.8.6 Time-corrected gain (TCG) .21
8.9 Gates .22
8.9.1 General.22
8.9.2 Gates with value output .23
8.9.3 Gates with analogue output.25
8.9.4 Gates with alarm output .27
8.10 Highest digitized frequency .28
8.10.1 Procedure .28
8.10.2 Acceptance criterion .29
8.11 Response time of digital ultrasonic instruments .29
8.11.1 General.29
8.11.2 Procedure .29
8.11.3 Acceptanc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.