EN ISO 15614-5:2004
(Main)Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
ISO 15614-5:2004 specifies how a welding procedure specification is qualified by welding procedure tests.
It defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8.
It is intended that tests be carried out in accordance with this International Standard. Additional tests may be required by application standards.
ISO 15614-5:2004 applies to the arc welding of titanium, zirconium and their alloys in all product forms.
Arc welding is covered by the following processes in accordance with EN ISO 4063.
131 -- metal inert gas welding, MIG welding
141 -- tungsten inert gas welding, TIG welding
15 -- plasma arc welding
The principles of this International Standard may be applied to other fusion welding processes.
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 5: Lichtbogenschweißen von Titan, Zirkonium und ihren Legierungen (ISO 15614-5:2004)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages (ISO 15614-5:2004)
L'ISO 15614-5:2004 spécifie comment un descriptif de mode opératoire de soudage est qualifié par épreuve. Elle définit les conditions d'exécution des épreuves de qualification de mode opératoire de soudage et le domaine de validité du mode opératoire de soudage, pour toutes les opérations pratiques de soudage englobant la liste des variables mentionnées à l'Article 8.
Les contrôles, examens et essais sont à réaliser conformément à l'ISO 15614-5:2004. Des contrôles, examens et essais complémentaires peuvent être exigés par des normes d'application.
L'ISO 15614-5:2004 s'applique au soudage à l'arc du titane, du zirconium et de leurs alliages sous toutes formes.
Le soudage à l'arc est couvert par les procédés suivants, conformément à l'ISO 4063:
131 - Soudage MIG (soudage à l'arc sous protection de gaz inerte avec fil-électrode fusible)
141 - Soudage TIG (soudage à l'arc sous protection de gaz inerte avec électrode de tungstène)
15 - Soudage plasma
Les principes de l'ISO 15614-5:2004 peuvent s'appliquer à d'autres procédés de soudage par fusion.
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus postopka varjenja - 5. del: Obločno varjenje titana, cirkonija in njunih zlitin (ISO 15614-5:2004)
General Information
Relations
Frequently Asked Questions
EN ISO 15614-5:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)". This standard covers: ISO 15614-5:2004 specifies how a welding procedure specification is qualified by welding procedure tests. It defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8. It is intended that tests be carried out in accordance with this International Standard. Additional tests may be required by application standards. ISO 15614-5:2004 applies to the arc welding of titanium, zirconium and their alloys in all product forms. Arc welding is covered by the following processes in accordance with EN ISO 4063. 131 -- metal inert gas welding, MIG welding 141 -- tungsten inert gas welding, TIG welding 15 -- plasma arc welding The principles of this International Standard may be applied to other fusion welding processes.
ISO 15614-5:2004 specifies how a welding procedure specification is qualified by welding procedure tests. It defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8. It is intended that tests be carried out in accordance with this International Standard. Additional tests may be required by application standards. ISO 15614-5:2004 applies to the arc welding of titanium, zirconium and their alloys in all product forms. Arc welding is covered by the following processes in accordance with EN ISO 4063. 131 -- metal inert gas welding, MIG welding 141 -- tungsten inert gas welding, TIG welding 15 -- plasma arc welding The principles of this International Standard may be applied to other fusion welding processes.
EN ISO 15614-5:2004 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15614-5:2004 has the following relationships with other standards: It is inter standard links to EN ISO 15614-5:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15614-5:2004 is associated with the following European legislation: EU Directives/Regulations: 2014/68/EU, 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 15614-5:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 5: Lichtbogenschweißen von Titan, Zirkonium und ihren Legierungen (ISO 15614-5:2004)Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 5: Soudage a l'arc sur titane, zirconium et leurs alliages (ISO 15614-5:2004)Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)77.120.50Titan in titanove zlitineTitanium and titanium alloys25.160.10Varilni postopki in varjenjeWelding processesICS:Ta slovenski standard je is
...
記事タイトル: EN ISO 15614-5:2004 - 金属材料の溶接手順仕様と溶接手順試験の仕様及び準格付け - 第5部: チタン、ジルコニウム及びその合金のアーク溶接(ISO 15614-5:2004) 記事内容: ISO 15614-5:2004では、溶接手順試験による溶接手順仕様の準格付け方法について規定しています。 この規格は、実用的な溶接操作における準格付けの条件と範囲を定義しています。国際規格に基づいて試験を実施することが意図されています。応用規格によっては、追加の試験が必要とされる場合があります。 ISO 15614-5:2004は、全ての製品形態におけるチタン、ジルコニウム及びその合金のアーク溶接に適用されます。 アーク溶接は、EN ISO 4063に準拠した以下のプロセスで対象とされます。 131 - 金属イナーシャガス溶接、MIG溶接 141 - トラングステンイナーシャガス溶接、TIG溶接 15 - プラズマアーク溶接 この国際規格の原則は、他の溶接法にも適用することができます。
EN ISO 15614-5:2004 - 금속 재료용 용접 절차의 규정 및 자격화 - 용접 절차 시험 - 제5부: 티타늄, 지르코늄 및 그 합금의 아크 용접(ISO 15614-5:2004) ISO 15614-5:2004는 용접 절차 명세가 용접 절차 시험에 의해 자격을 받는 방법을 명시합니다. 이 표준은 용접 절차 시험의 실행 조건 및 변수 범위에 대한 자격 범위를 정의합니다. 이 표준에 따라 시험을 수행하는 것이 목적입니다. 응용 표준에 따라 추가 시험이 필요할 수도 있습니다. ISO 15614-5:2004는 모든 제품 형태에서 티타늄, 지르코늄 및 그 합금의 아크 용접에 적용됩니다. 아크 용접은 EN ISO 4063에 따라 다음 공정으로 다루어집니다. 131 - 금속 이너트 가스 용접, MIG 용접 141 - 텅스텐 이너트 가스 용접, TIG 용접 15 - 플라즈마 아크 용접 이 표준의 원칙은 다른 용융 용접 공정에도 적용될 수 있습니다.
The article discusses EN ISO 15614-5:2004, which outlines the specification and qualification of welding procedures for metallic materials, specifically focusing on arc welding of titanium, zirconium, and their alloys. The standard defines the conditions and range of qualification for welding procedures and is intended for use in practical welding operations. It also mentions that additional tests may be required based on application standards. The article further explains that the standard applies to arc welding processes such as metal inert gas welding, tungsten inert gas welding, and plasma arc welding. Lastly, it states that the principles of this standard can be applied to other fusion welding processes as well.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...