EN 12639:2000
(Main)Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
This European Standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at specified positions and the sound power level.
Flüssigkeitspumpen und -pumpenaggregate - Geräuschmessung - Genauigkeitsklassen 2 und 3
Diese Europäische Norm legt alle Informationen fest, um wirkungsvoll und unter genormten Bedingungen die Bestimmung, Angabe und Feststellung der Übereinstimmung der Luftschallgeräuschemission von Flüssigkeitspumpen oder -pumpenaggregaten durchzuführen. Sie legt die zugelassenen Geräuschmeßverfahren fest, die zur Prüfung verwendet werden müssen. Die Geräuschemissions-Kennwerte schließen den Emissionsschalldruckpegel einer festgelegten Position und den Schalleistungs- pegel ein.
Pompes et groupes motopompes pour liquide - Code d'essai acoustique - Classes de précision 2 et 3
La présente norme européenne spécifie toutes les informations nécessaires au traitement, efficace et dans les conditions normalisées, de la détermination, la déclaration et la vérification de l'émission de bruit aérien des pompes ou groupes motopompes pour liquide (voir 4.1). Elle spécifie les modes opératoires de mesurage du bruit ainsi que les conditions de fonctionnement et de montage qui doivent être utilisées pour l'essai. Les caractéristiques d'émission sonore comprennent les niveaux de pression acoustique d'émission en des points spécifiés ainsi que le niveau de puissance acoustique.
Črpalke za tekočine in črpalni agregati - Merjenje hrupa - Razreda točnosti 2 in 3
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 21-Apr-2009
- Technical Committee
- CEN/TC 197 - Pumps
- Drafting Committee
- CEN/TC 197/SC 3 - Testing of pumps
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Apr-2009
- Completion Date
- 22-Apr-2009
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 06-May-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Corrected By
EN 12639:2000/AC:2000 - Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy - Effective Date
- 08-Jun-2022
- Corrected By
EN 12639:2000/AC:2004 - Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy - Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
BSMI (Bureau of Standards, Metrology and Inspection)
Taiwan's standards and inspection authority.
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 12639:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy". This standard covers: This European Standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at specified positions and the sound power level.
This European Standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at specified positions and the sound power level.
EN 12639:2000 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 23.080 - Pumps. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12639:2000 has the following relationships with other standards: It is inter standard links to EN ISO 20361:2009, EN 12050-2:2000, EN 14466:2005+A1:2008, EN 12050-3:2000, EN 12050-4:2000, EN 12639:2000/AC:2000, EN 12639:2000/AC:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12639:2000 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12639:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2001
ýUSDONH]DWHNRþLQHLQþUSDOQLDJUHJDWL0HUMHQMHKUXSD5D]UHGDWRþQRVWLLQ
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
Flüssigkeitspumpen und -pumpenaggregate - Geräuschmessung - Genauigkeitsklassen
2 und 3
Pompes et groupes motopompes pour liquide - Code d'essai acoustique
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...