EN ISO 11532:2020

SLOVENSKI STANDARD
01-september-2020
Letalska talna oprema - Grafični simboli (ISO 11532:2018)
Aircraft ground equipment - Graphical symbols (ISO 11532:2018)
Luftfahrt-Bodengeräte - Graphische Symbole (ISO 11532:2018)
Matériel au sol pour aéronefs - Symboles graphiques (ISO 11532:2018)
Ta slovenski standard je istoveten z: EN ISO 11532:2020
ICS:
01.080.20 Grafični simboli za posebno Graphical symbols for use on
opremo specific equipment
49.100 Oprema za servis in Ground service and
vzdrževanje na tleh maintenance equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11532
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 01.080.20; 49.100
English Version
Aircraft ground equipment - Graphical symbols (ISO
11532:2018)
Matériel au sol pour aéronefs - Symboles graphiques Luftfahrt-Bodengeräte - Graphische Symbole (ISO
(ISO 11532:2018) 11532:2018)
This European Standard was approved by CEN on 10 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11532:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 11532:2018 has been prepared by Technical Committee ISO/TC 20 "Aircraft and space
vehicles” of the International Organization for Standardization (ISO) and has been taken over as
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11532:2018 has been approved by CEN as EN ISO 11532:2020 without any modification.

INTERNATIONAL ISO
STANDARD 11532
Second edition
2018-02
Aircraft ground equipment —
Graphical symbols
Matériel au sol pour aéronefs — Symboles graphiques
Reference number
ISO 11532:2018(E)
©
ISO 2018
ISO 11532:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 11532:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 1
5 Designation and illustration of symbols . 2
5.1 Equipment lighting . 2
5.2 Hydraulics . 5
5.3 Pneumatics . 6
5.4 Electrical equipment . 7
5.5 Engine, transmission, power take-off . 9
5.6 Brakes .12
5.7 Drive/driving operation .14
5.8 Lifting/working position .21
5.9 Emergency operation .33
5.10 Maintenance .34
5.11 Miscellaneous .35
Bibliography .36
ISO 11532:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles,
Subcommittee SC 9, Air cargo and ground equipment.
This second edition cancels and replaces the first edition (ISO 11532:2012), to which it adds new
symbols [20.09.07.54, 20.09.05.20 and 20.09.05.21], deemed indispensable for aircraft protection at
docking and electrically powered equipment protection.
iv © ISO 2018 – All rights reserved

ISO 11532:2018(E)
Introduction
This document is a compendium of all graphical symbols generally used on aircraft ground support
equipment. Included are relevant symbols used in the automotive industry, as standard commercial
chassis often form part of the equipment.
Manufacturers are encouraged to select those symbols needed for the type(s) of equipment they
produce. Users of equipment can also take an excerpt from the content of this document for staff
training purposes depending on the equipment concerned.
INTERNATIONAL STANDARD ISO 11532:2018(E)
Aircraft ground equipment — Graphical symbols
1 Scope
This document establishes common graphical symbols for use on all types of aircraft ground support
equipment.
They have been compiled for the benefit of those who deal with such equipment, such as airlines, airport
handling agencies, airport authorities, manufacturers, etc., in order to facilitate fast and accurate
identification of controls, indicators and decals of powered and unpowered equipment.
The presentation of this document is based on the recommendations of ISO/TC 145, Graphical symbols.
This document is also intended to promote standardization of terms for controls, indicators, etc. for
aircraft ground support equipment and alleviate language problems.
These graphical symbols are intended to be placed on all new equipment and retrofitted on all existing
equipment as far as possible.
NOTE This document is intended to be read with the documents listed in the bibliography.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6966-2, Aircraft ground equipment — Basic requirements — Part 2: Safety requirements
1)2)
ISO 7000, Graphical symbols for use on equipment — Registered symbols,
ISO 10254, Air cargo and ground equipment — Vocabulary
IEC 60417, Graphical symbols for use on equipment
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 10254 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at http:// www .iso .org/ obp
4 General requirements
The s
...