iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12348:2000/prA1

(Amendment)

Core drilling machines on stand - Safety

Core drilling machines on stand - Safety

Kernbohrmaschinen auf Ständer - Sicherheit

Foreuses à béton (carotteuses) sur colonne - Sécurité

Stabilni vrtalni stroji - Varnost

General Information

Status
Not Published
ICS
25.080.40 - Drilling machines
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 6 - Machines and equipment to process building materials (portable, hand-guided, support-mounted, on rails or self-propelled) - Safety
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
28-Jan-2009
Completion Date
28-Jan-2009
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 12348:2000/kprA1:2008 - Core drilling machines on stand - Safety

Relations

Merged Into
EN 12348:2000+A1:2009 - Core drilling machines on stand - Safety
Effective Date
18-Jan-2023
Amends
EN 12348:2000 - Core drilling machines on stand - Safety
Effective Date
22-Dec-2008

Buy Standard

EN 12348:2000/kprA1:2008EN 12348:2000/kprA1:2008
PreviousNext
Draft
EN 12348:2000/kprA1:2008
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12348:2000/kprA1:2008
01-december-2008
Stabilni vrtalni stroji - Varnost
Core drilling machines on stand - Safety
Kernbohrmaschinen auf Ständer - Sicherheit
Foreuses à béton (carotteuses) sur colonne - Sécurité
Ta slovenski standard je istoveten z: EN 12348:2000/prA1
ICS:
25.080.40 Vrtalniki Drilling machines
SIST EN 12348:2000/kprA1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12348:2000/kprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 12348:2000/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 12348:2000
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 25.080.40

English Version
Core drilling machines on stand - Safety
Foreuses à béton (carotteuses) sur colonne - Sécurité Kernbohrmaschinen auf Ständer - Sicherheit
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 12348:2000. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12348:2000/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12348:2000/kprA1:2008
EN 12348:2000/prA1:2008 (E)
Contents
Foreword.3
1 Modification to the Introduction.4
2 Modification to Clause 2, Normative references .4
3 Modifications to Clause 3, Terms and definitions.5
4 Modification to Clause 4, List of significant hazards.5
5 Modification to Clause 5, Safety requirements and/or measures.6
6 Modification to 5.1.2.1, Transmission parts.6
7 Modification to 5.1.2.2, Feed of the drilling unit on the column .6
8 Modification to 5.1.4, Stability during work .6
9 Modification to 5.1.5, Control device .7
10 Modification to 5.2.1, General.7
11 Modification to 5.2.2, Water pump .7
12 Modification to 5.4.2 .7
13 Modification to 5.4.3 .8
14 Modification to 5.4.4, Test method.8
15 Modification to 5.10.1, Noise reduction at the design stage .8
16 Modification to Clause 7, Information for use .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12348:2000+A1:2009(Main)
Core drilling machines on stand - Safety
SIST EN 12348:2000+A1:2009

This European Standard applies to core drilling machines on transportable stands equipped with a diamond
core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and
similar mineral materials in a stationary position where the power for the tool rotation is supplied by an
electrical, hydraulic, pneumatic or internal combustion prime motor.
The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic
means.
This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when
used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard
specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard does not apply to:
- percussive or rotary-percussive rock drills either mounted or unmounted;
- hand held power drills;
- hydraulic or pneumatic power supply sources;
- mobile undercarriages to which machines can be fitted.
This European Standard does not apply to machinery covered by EN 791:1995.
This European Standard covers electrical hazards by making reference to relevant European Standards (see
5.2).
Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and
that are dealt with in standards for common use are not covered by this European Standard. Reference to
pertinent standards of this kind is made where such standards are applicable and so far as is necessary.
In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits
are called “tools”.
NOTE The term "diamond" is used as a generic word which covers all varieties of abrasive products such as
diamond, borum nitride.
This European Standard applies primarily to machines which are manufactured after the date of approval of
the standard by CEN.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12348:2000+A1:2009(Main)
Core drilling machines on stand - Safety
SIST EN 12348:2000+A1:2009

This European Standard applies to core drilling machines on transportable stands equipped with a diamond
core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and
similar mineral materials in a stationary position where the power for the tool rotation is supplied by an
electrical, hydraulic, pneumatic or internal combustion prime motor.
The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic
means.
This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when
used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard
specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard does not apply to:
- percussive or rotary-percussive rock drills either mounted or unmounted;
- hand held power drills;
- hydraulic or pneumatic power supply sources;
- mobile undercarriages to which machines can be fitted.
This European Standard does not apply to machinery covered by EN 791:1995.
This European Standard covers electrical hazards by making reference to relevant European Standards (see
5.2).
Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and
that are dealt with in standards for common use are not covered by this European Standard. Reference to
pertinent standards of this kind is made where such standards are applicable and so far as is necessary.
In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits
are called “tools”.
NOTE The term "diamond" is used as a generic word which covers all varieties of abrasive products such as
diamond, borum nitride.
This European Standard applies primarily to machines which are manufactured after the date of approval of
the standard by CEN.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12717:2001+A1:2009(Main)
Safety of machine tools - Drilling machines
SIST EN 12717:2002+A1:2009

1.1   This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary drilling machines (see 3.1).
This standard covers both manual and automatic drilling machines. These include but are not limited to:
-   pedestal drilling machines (see figure A.1);
-   radial arm drilling machines (see figure A.2);
-   coordinate table drilling machines (see figure A.3);
-   horizontal spindle drilling machines (see figure A.4);
-   multi-spindle drilling machines (see figure A.5)
-   turret type drilling machines with manual control of turret index.
1.2   This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations.  It presumes access to the machine from all directions.  It describes means to reduce risks to operators and other exposed persons.
1.3   This standard also applies to workpiece transfer devices when they form an integral part of the machine.
1.4   This standard deals with significant hazards relevant to drilling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.5   Hazards arising from other metal working processes (e.g. milling, grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography).
1.6   Automatic drilling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996).
1.7   This standard is not applicable to drilling machines, which were manufactured before the date of publication by CEN of this standard.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 81060-2:2019/A2:2024(Amendment)
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2 (ISO 81060-2:2018/Amd 2:2024)
SIST EN ISO 81060-2:2020/A2:2024
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16783:2024(Main)
Thermal insulation products - Environmental Product Declarations (EPD) - Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
kSIST FprEN 16783:2024

This document provides the product category rules (PCR) for Type III environmental declarations (as in EN 15804:2012+A2:20191) for factory made and in situ thermal insulation products.
Complementary to EN 15804:2012+A2:20191, the PCR described in this document:
-   specify the declared unit to be used;
-   define the system boundaries for thermal insulation products;
-   specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules.
These PCR are intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16021:2024(Main)
Absorbent incontinence products for urine and/or faeces - Basic principles for evaluation of single-use adult products from the perspective of users and caregivers (ISO 16021:2024)
SIST EN ISO 16021:2024

This document provides guidelines and requirements for designing and conducting an evaluation of single-use adult incontinence absorbing products. It provides guidelines and requirements on creating data collection tools. In particular, it provides a framework for eliciting and recording the views of users and their carers on the acceptability of products. In addition, a product diary is described which can help to quantify some parameters of product use, such as wear times, the mass of urine absorbed by the product and the severity of any leakage from it.
This document does not cover direct comparison between products based on statistical parameters, neither does it provide guidelines on measuring the clinical efficacy of products; that is available in ISO 14155.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day