EN 14879-1:2005
(Main)Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
This European Standard describes the terminology, the design and the preparation of the substrate of
industrial apparatus for the protection against corrosion caused by aggressive media. These industrial apparatus include, for example, reaction tanks, storage tanks, floors in industrial plants, in general for production and handling of chemicals.
The protection is applicable to metallic and concrete structures.
Beside the protection of the apparatus, the protection of the media itself against pollution is also considered in this series of European Standards EN 14879.
A protection against corrosion caused by atmospheric exposure (as for example according to EN ISO 12944-4) is not included in the scope of this series of European Standards EN 14879.
Corrosion protection systems according to this series of European Standards EN 14879 are:
1) Thick coatings normally of 1 mm or more thick.
2) Linings made of pre-fabricated sheets respectively plate materials.
3) Combined linings with tile and brick layers.
Beschichtungen und Auskleidungen aus organischen Werkstoffen zum Schutz von industriellen Anlagen gegen Korrosion durch aggressive Medien - Teil 1: Terminologie, Konstruktion und Vorbereitung des Untergrundes
Diese Europäische Norm beschreibt die Terminologie, die Konstruktion und die Vorbereitung des Untergrun-des
bei industriellen Anlagen zum Schutz gegen Korrosion durch aggressive Medien. Diese industriellen An-lagen
umfassen z. B. Reaktionstanks, Lagertanks, Böden in industriellen Anlagen, die im Allgemeinen für die
Produktion und Handhabung von chemischen Stoffen verwendet werden.
Der Schutz kann auf Metall- und Betonkonstruktionen aufgebracht werden.
Außer dem Schutz der Anlage wird in dieser Europäischen Normenreihe EN 14879 auch der Schutz des
jeweiligen Mediums behandelt.
Der Schutz gegen Korrosion durch atmosphärische Einwirkungen (z. B. nach EN ISO 12944-4) fällt nicht in
den Anwendungsbereich der Europäischen Normenreihe EN 14879.
Korrosionsschutzsysteme nach dieser Europäischen Normenreihe EN 14879 sind:
1) Beschichtungen mit einer Dicke von üblicherweise 1 mm oder mehr;
2) Auskleidungen aus vorgefertigten Bahnen (Halbzeug);
3) kombinierte Auskleidungen mit Plattierungen oder Ausmauerungen.
Systèmes de revêtements organiques de peinture et autres revêtements rapportés pour la protection des appareils et installations industriels contre la corrosion par des milieux agressifs - Partie 1 : Terminologie, conception et préparation des subjectiles
Cette Norme européenne établit la terminologie et décrit la conception et la préparation de subjectiles
d�appareils et installations industriels pour la protection contre la corrosion causée par des milieux agressifs.
Ces appareils et installations industriels comprennent, par exemple, les réacteurs, les réservoirs de stockage,
les sols d�usines, en général pour la production et la manutention de produits chimiques.
La protection est applicable aux structures métalliques et en béton.
Outre la protection des appareils, la protection des fluides eux-mêmes contre la pollution est également
examinée dans la présente série de Normes européennes EN 14879.
La protection contre la corrosion due à une exposition à l�air ambiant (telle que, par exemple, conformément à
l�EN ISO 12944-4) ne relève pas du domaine d�application des Normes européennes de la série EN 14879.
Les systèmes de protection contre la corrosion conformes à la présente série de Normes européennes EN
14879 sont les suivants :
1) les revêtements épais, en général d�épaisseur supérieure ou égale à 1 mm ;
2) les revêtements rapportés en feuilles préfabriquées de matériaux en plaque ;
3) les revêtements rapportés associés à des couches de carreaux et de briques.
Sistemi organskih premazov in prevlek za protikorozijsko zaščito industrijskih naprav in obratov v kemijsko agresivnih pogojih - 1. del: Terminologija, načrtovanje in priprava podlage
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2005
Sistemi organskih premazov in prevlek za protikorozijsko zaščito industrijskih
naprav in obratov v kemijsko agresivnih pogojih - 1. del: Terminologija,
načrtovanje in priprava podlage
Organic coating systems and linings for protection of industrial apparatus and plants
against corrosion caused by aggressive media - Part 1: Terminology, design and
preparation of substrate
Beschichtungen und Auskleidungen aus organischen Werkstoffen zum Schutz von
industriellen Anlagen gegen Korrosion durch aggressive Medien - Teil 1: Terminologie,
Konstruktion und Vorbereitung des Untergrundes
Systemes de revetements organiques de peinture et autres revetements rapportés pour
la protection des appareils et installations industriels contre la corrosion par des milieux
agressifs - Partie 1 : Terminologie, conception et préparation des subjectiles
Ta slovenski standard je istoveten z: EN 14879-1:2005
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.220.60 Organske prevleke Organic coatings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14879-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 01.040.25; 25.220.60
English Version
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive
media - Part 1: Terminology, design and preparation of substrate
Systèmes de revêtements organiques de peinture et autres Beschichtungen und Auskleidungen aus organischen
revêtements rapportés pour la protection des appareils et Werkstoffen zum Schutz von industriellen Anlagen gegen
installations industriels contre la corrosion par des milieux Korrosion durch aggressive Medien - Teil 1: Terminologie,
agressifs - Partie 1 : Terminologie, conception et Konstruktion und Vorbereitung des Untergrundes
préparation des subjectiles
This European Standard was approved by CEN on 22 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14879-1:2005: E
worldwide for CEN national Members.
Contents
page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.6
4 Design and preparation of substrate.7
4.1 Metallic components.7
4.1.1 Design of metallic components .7
4.1.2 Requirements for metallic substrates .24
4.2 Concrete structures.31
4.2.1 Design of concrete structures .31
4.2.2 Requirements for concrete substrates.33
Bibliography.36
Foreword
This European Standard (EN 14879-1:2005) has been prepared by Working Group CEN/BT/TF 130 "Organic coat-
ing systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive
media", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2006, and conflicting national standards shall be withdrawn at the latest by
March 2006.
EN 14879 "Organic coating systems and linings for protection of industrial apparatus and plants against corrosion
caused by aggressive media" consists of the following parts:
Part 1: Terminology, design and preparation of substrate
Part 2: Coatings on metallic components
Part 3: Coatings on concrete components
Part 4: Linings on metallic components
Part 5: Linings on concrete components
Part 6: Combined lining with tile and brick layers
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-
tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto-
nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard describes the terminology, the design and the preparation of the substrate of
industrial apparatus for the protection against corrosion caused by aggressive media. These industrial apparatus
include, for example, reaction tanks, storage tanks, floors in industrial plants, in general for production and handling
of chemicals.
The protection is applicable to metallic and concrete structures.
Beside the protection of the apparatus, the protection of the media itself against pollution is also considered in this
series of European Standards EN 14879.
A protection against corrosion caused by atmospheric exposure (as for example according to EN ISO 12944-4) is
not included in the scope of this series of European Standards EN 14879.
Corrosion protection systems according to this series of European Standards EN 14879 are:
1) Thick coatings normally of 1 mm or more thick.
2) Linings made of pre-fabricated sheets respectively plate materials.
3) Combined linings with tile and brick layers.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
EN 206-1, Concrete — Part 1: Specification, performance, production and conformity
EN 1504-1, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 1: Definitions
EN 1504-2, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 2: Surface protection systems for concrete
EN 1504-3, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 3: Structural and non-structural repair
EN 1504-4, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 4: Structural bonding
EN 1504-5, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 5: Concrete injection
EN 1504-8, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 8: Quality control and evaluation of conformity
ENV 1504-9, Products and systems for the protection and repair of concrete structures — Definitions, require-
ments, quality control and evaluation of conformity — Part 9: General principles for the use of products and sys-
tems
EN 1504-10, Products and systems for the protection and repair of concrete structures — Definitions, require-
ments, quality control and evaluation of conformity — Part 10: Site application of products and systems and quality
control of the works
EN 1559-1:1997, Founding — Technical conditions of delivery — Part 1: General
EN 1990, Eurocode — Basis of structural design
EN 1992-1-1, Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings
EN 10025 (all parts), Hot rolled products of non-alloy structural steels — General technical delivery conditions
EN 10028-1, Flat products made of steels for pressure purposes — Part 1: General requirements
EN 10028-2, Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specified
elevated temperature properties
EN 10088-2, Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general and construction purposes
EN 10088-3, Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire,
sections and bright products of corrosion resisting steels for general and construction purposes
EN 10130+A1, Cold rolled low carbon steel flat products for cold forming — Technical delivery conditions
EN 10139, Cold rolled uncoated mild steel narrow steel strip for cold forming — Technical delivery conditions
EN 10208-1, Steel pipes for pipelines for combustible fluids — Technical delivery conditions — Part 1: Pipes of
requirement class A
EN 10216-2, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and
alloy steel tubes with specified elevated temperature properties
EN 10217-1, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel
tubes with specified room temperature properties
EN 10217-2, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric welded
non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-7, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 7: Stainless steel
tubes
EN 10293, Steel castings for general engineering usesprEN 10296-2, Welded circular steel tubes for mechanical
and general engineering purposes — Technical delivery conditions — Part 2: Stainless steel
prEN 10340, Steel castings for structural uses
EN 10297-2, Seamless circular steel tubes for mechanical and general engineering purposes — Technical delivery
conditions — Part 2: Stainless steel
EN 13813, Screed material and floor screeds — Screed materials — Properties and requirements
prEN 14879-3, Organic coating systems and linings for protection of industrial apparatus and plants against corro-
sion caused by aggressive media — Part 3: Coatings on concrete components
prEN 14879-5, Organic coating systems and linings for protection of industrial apparatus and plants against corro-
sion caused by aggressive media — Part 5: Linings on concrete components
EN ISO 4617:2000, Paints and varnishes — List of equivalent terms (ISO 4617:2000)
EN ISO 4618-2:1999, Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms
relating to paint characteristics and properties (ISO 4618-2:1999)
EN ISO 4618-3:1999, Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface prepa-
ration and methods of application (ISO 4618-3:1999)
EN ISO 6520-1, Welding and allied processes — Classification of geometric imperfections in metallic materials —
Part 1: Fusion welding (ISO 6520-1:1998)
EN ISO 7093-1, Plain washers — Large series — Part 1: Product grade A (ISO 7093-1:2000)
EN ISO 12944-4, Paints and varnishes — Corrosion protection of steel structures by protective paint systems —
Part 4: Types of surface and surface preparation (ISO 12944-4:1998)
ISO 4997, Cold-reduced steel sheet of structural quality
ISO 9329 (all parts), Seamless steel tubes for pressure purposes — Technical delivery conditions
ISO 9330-1, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel
tubes with specified room temperatures properties
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in EN ISO 4617:2000, EN ISO 4618-
2:1999, EN ISO 4618-3:1999 and the following apply.
3.1
surface protection system
consists of the materials and material combinations listed in the standards of the series EN 14879, which protect
and seal concrete parts or metallic components in process plants
3.2
coating
produced by applying an organic coating material to protect steel or concrete parts against corrosion
3.3
coating material
liquid to pas
...
SLOVENSKI STANDARD
01-december-2005
6LVWHPLRUJDQVNLKSUHPD]RYLQSUHYOHN]DSURWLNRUR]LMVNR]DãþLWRLQGXVWULMVNLK
QDSUDYLQREUDWRYYNHPLMVNRDJUHVLYQLKSRJRMLK±GHO 7HUPLQRORJLMDREOLNDLQ
SULSUDYDSRGODJH
Organic coating systems and linings for protection of industrial apparatus and plants
against corrosion caused by aggressive media - Part 1: Terminology, design and
preparation of substrate
Beschichtungen und Auskleidungen aus organischen Werkstoffen zum Schutz von
industriellen Anlagen gegen Korrosion durch aggressive Medien - Teil 1: Terminologie,
Konstruktion und Vorbereitung des Untergrundes
Systemes de revetements organiques de peinture et autres revetements rapportés pour
la protection des appareils et installations industriels contre la corrosion par des milieux
agressifs - Partie 1 : Terminologie, conception et préparation des subjectiles
Ta slovenski standard je istoveten z: EN 14879-1:2005
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.220.60 Organske prevleke Organic coatings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14879-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 01.040.25; 25.220.60
English Version
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive
media - Part 1: Terminology, design and preparation of substrate
Systèmes de revêtements organiques de peinture et autres Beschichtungen und Auskleidungen aus organischen
revêtements rapportés pour la protection des appareils et Werkstoffen zum Schutz von industriellen Anlagen gegen
installations industriels contre la corrosion par des milieux Korrosion durch aggressive Medien - Teil 1: Terminologie,
agressifs - Partie 1 : Terminologie, conception et Konstruktion und Vorbereitung des Untergrundes
préparation des subjectiles
This European Standard was approved by CEN on 22 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14879-1:2005: E
worldwide for CEN national Members.
Contents
page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.6
4 Design and preparation of substrate.7
4.1 Metallic components.7
4.1.1 Design of metallic components .7
4.1.2 Requirements for metallic substrates .24
4.2 Concrete structures.31
4.2.1 Design of concrete structures .31
4.2.2 Requirements for concrete substrates.33
Bibliography.36
Foreword
This European Standard (EN 14879-1:2005) has been prepared by Working Group CEN/BT/TF 130 "Organic coat-
ing systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive
media", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2006, and conflicting national standards shall be withdrawn at the latest by
March 2006.
EN 14879 "Organic coating systems and linings for protection of industrial apparatus and plants against corrosion
caused by aggressive media" consists of the following parts:
Part 1: Terminology, design and preparation of substrate
Part 2: Coatings on metallic components
Part 3: Coatings on concrete components
Part 4: Linings on metallic components
Part 5: Linings on concrete components
Part 6: Combined lining with tile and brick layers
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-
tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto-
nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard describes the terminology, the design and the preparation of the substrate of
industrial apparatus for the protection against corrosion caused by aggressive media. These industrial apparatus
include, for example, reaction tanks, storage tanks, floors in industrial plants, in general for production and handling
of chemicals.
The protection is applicable to metallic and concrete structures.
Beside the protection of the apparatus, the protection of the media itself against pollution is also considered in this
series of European Standards EN 14879.
A protection against corrosion caused by atmospheric exposure (as for example according to EN ISO 12944-4) is
not included in the scope of this series of European Standards EN 14879.
Corrosion protection systems according to this series of European Standards EN 14879 are:
1) Thick coatings normally of 1 mm or more thick.
2) Linings made of pre-fabricated sheets respectively plate materials.
3) Combined linings with tile and brick layers.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
EN 206-1, Concrete — Part 1: Specification, performance, production and conformity
EN 1504-1, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 1: Definitions
EN 1504-2, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 2: Surface protection systems for concrete
EN 1504-3, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 3: Structural and non-structural repair
EN 1504-4, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 4: Structural bonding
EN 1504-5, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 5: Concrete injection
EN 1504-8, Products and systems for the protection and repair of concrete structures — Definitions, requirements,
quality control and evaluation of conformity — Part 8: Quality control and evaluation of conformity
ENV 1504-9, Products and systems for the protection and repair of concrete structures — Definitions, require-
ments, quality control and evaluation of conformity — Part 9: General principles for the use of products and sys-
tems
EN 1504-10, Products and systems for the protection and repair of concrete structures — Definitions, require-
ments, quality control and evaluation of conformity — Part 10: Site application of products and systems and quality
control of the works
EN 1559-1:1997, Founding — Technical conditions of delivery — Part 1: General
EN 1990, Eurocode — Basis of structural design
EN 1992-1-1, Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings
EN 10025 (all parts), Hot rolled products of non-alloy structural steels — General technical delivery conditions
EN 10028-1, Flat products made of steels for pressure purposes — Part 1: General requirements
EN 10028-2, Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specified
elevated temperature properties
EN 10088-2, Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general and construction purposes
EN 10088-3, Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire,
sections and bright products of corrosion resisting steels for general and construction purposes
EN 10130+A1, Cold rolled low carbon steel flat products for cold forming — Technical delivery conditions
EN 10139, Cold rolled uncoated mild steel narrow steel strip for cold forming — Technical delivery conditions
EN 10208-1, Steel pipes for pipelines for combustible fluids — Technical delivery conditions — Part 1: Pipes of
requirement class A
EN 10216-2, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and
alloy steel tubes with specified elevated temperature properties
EN 10217-1, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel
tubes with specified room temperature properties
EN 10217-2, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric welded
non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-7, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 7: Stainless steel
tubes
EN 10293, Steel castings for general engineering usesprEN 10296-2, Welded circular steel tubes for mechanical
and general engineering purposes — Technical delivery conditions — Part 2: Stainless steel
prEN 10340, Steel castings for structural uses
EN 10297-2, Seamless circular steel tubes for mechanical and general engineering purposes — Technical delivery
conditions — Part 2: Stainless steel
EN 13813, Screed material and floor screeds — Screed materials — Properties and requirements
prEN 14879-3, Organic coating systems and linings for protection of industrial apparatus and plants against corro-
sion caused by aggressive media — Part 3: Coatings on concrete components
prEN 14879-5, Organic coating systems and linings for protection of industrial apparatus and plants against corro-
sion caused by aggressive media — Part 5: Linings on concrete components
EN ISO 4617:2000, Paints and varnishes — List of equivalent terms (ISO 4617:2000)
EN ISO 4618-2:1999, Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms
relating to paint characteristics and properties (ISO 4618-2:1999)
EN ISO 4618-3:1999, Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface prepa-
ration and methods of application (ISO 4618-3:1999)
EN ISO 6520-1, Welding and allied processes — Classification of geometric imperfections in metallic materials —
Part 1: Fusion welding (ISO 6520-1:1998)
EN ISO 7093-1, Plain washers — Large series — Part 1: Product grade A (ISO 7093-1:2000)
EN ISO 12944-4, Paints and varnishes — Corrosion protection of steel structures by protective paint systems —
Part 4: Types of surface and surface preparation (ISO 12944-4:1998)
ISO 4997, Cold-reduced steel sheet of structural quality
ISO 9329 (all parts), Seamless steel tubes for pressure purposes — Technical delivery conditions
ISO 9330-1, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel
tubes with specified room temperatures properties
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in EN ISO 4617:2000, EN ISO 4618-
2:1999, EN ISO 4618-3:1999 and the following apply.
3.1
surface protection system
consists of the materials and material combinations listed in the standards of the series EN 14879, which protect
and seal concrete parts or metallic components in process plants
3.2
coating
produced by applying an organic coating material to protect steel or concrete parts against corrosion
3.3
coating material
liquid
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.