iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 303-5:1999

(Main)

Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kw - Terminology, requirements, testing and marking

Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kw - Terminology, requirements, testing and marking

This standard applies to heating boilers up to a nominal heat output of 300 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer either with negative pressure or with positive pressure in the combustion chamber.

Heizkessel - Teil 5: Heizkessel für feste Brennstoffe, hand- und automatisch beschickte Feuerungen, Nenn-Wärmeleistung bis 300 kW - Begriffe, Anforderungen, Prüfungen und Kennzeichnung

Diese Norm gilt für Heizkessel bis zu einer Nenn-Wärmeleistung von 300 kW, die ausschließlich für die Verfeuerung von festen Brennstoffen bestimmt sind und nach den Festlegungen des Kesselherstellers entweder mit Unterdruck oder mit Überdruck im Brennraum betrieben werden.

Chaudières de chauffage - Partie 5: Chaudières spéciales pour combustibles solides, à chargement manuel et automatique, puissance utile inférieure ou égale à 300 kW - Définitions, exigences, essais et marquage

La présente norme s'applique aux chaudières de chauffage ayant une puissance utile nominale inférieure ou égale à 300 kW, destinées à brûler des combustibles solides et définies par le constructeur comme des chaudières à chambre de combustion en dépression ou en pression.

Kotli za gretje – 5. del: Kotli na trdna goriva z ročnim in samodejnim polnjenjem z imensko grelno močjo do 300 kW - Terminologija, zahteve, preskušanje in označevanje

General Information

Status
Withdrawn
Publication Date
20-Apr-1999
Withdrawal Date
26-Jun-2012
ICS
01.040.91 - Construction materials and building (Vocabularies)
91.140.10 - Central heating systems
Technical Committee
CEN/TC 57 - Central heating boilers
Drafting Committee
CEN/TC 57/WG 1 - Central heating boilers for solid fuels
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
27-Jun-2012
Completion Date
27-Jun-2012
Ref Project
SIST EN 303-5:1999 - Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kw - Terminology, requirements, testing and marking

Relations

Replaced By
EN 303-5:2012 - Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
Effective Date
22-Dec-2008

Buy Standard

EN 303-5:1999EN 303-5:1999
PreviousNext
Standard
EN 303-5:1999
English language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.R]QDþHYDQMHHeizkessel - Teil 5: Heizkessel für feste Brennstoffe, hand- und automatisch beschickte Feuerungen, Nenn-Wärmeleistung bis 300 kW - Begriffe, Anforderungen, Prüfungen und KennzeichnungChaudieres de chauffage - Partie 5: Chaudieres spéciales pour combustibles solides, a chargement manuel et automatique, puissance utile inférieure ou égale a 300 kW - Définitions, exigences, essais et marquageHeating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kw - Terminology, requirements, testing and marking97.100.30Grelniki na trdo gorivoSolid fuel heaters91.140.10Sistemi centralnega ogrevanjaCentral heating systems01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 303-5:1999SIST EN 303-5:1999en01-december-1999SIST EN 303-5:1999SLOVENSKI
STANDARD



SIST EN 303-5:1999



SIST EN 303-5:1999



SIST EN 303-5:1999



S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 303-1:2017(Main)
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
SIST EN 303-1:2017

This European Standard applies to boilers used for central heating (heating boilers) with forced draught burners with a nominal heat output not exceeding 1 000 kW, which are operated either with negative pressure (natural draught boilers) or with positive pressure (pressurized boiler) in the combustion chamber, in accordance with the boiler instructions.
This European Standard specifies the necessary terminology, the requirements on the materials and testing of them, and marking requirements for heating boilers.
Particular requirements for boilers that can be used with open vented systems are contained in EN 303 4.
The requirements of this standard apply to heating boilers that are tested on an authorized test rig.
Boilers in accordance with this standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is restricted to 100 °C. The maximum allowable operating pressure is 8 bar.
For boilers and water heaters (storage or continuous flow heater) this standard only applies to the parts which are necessarily subject to the operating conditions of the heating boiler (heating part).
This standard does not apply to gas boilers with atmospheric burners, boilers for solid fuels, boilers with oil vaporization burners. For these boilers there are further requirements.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14394:2005+A1:2008(Main)
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
SIST EN 14394:2006+A1:2008

This European Standard specifies the requirements and test methods for the design, manufacturing, safe operation and the rational energy usage for standard boilers and low temperature boilers (with "boiler" in the sense of "boiler body") from steel and cast iron to be equipped with separately marketed forced draught burners according to the relevant burner standards (for automatic forced draught burners for gaseous fuels see EN 676 and for atomising oil burners see EN 267) up to a nominal heat output of 10 MW. They are operated, either with negative pressure (natural draught boiler) or with positive pressure (pressurised boiler) in the combustion chamber, in accordance with the boiler manufacturer's instructions."
This European Standard specifies requirements for boilers with normal operating temperatures between 100 °C and 110 °C and has a "dual structure":
-   For boilers where the shut off temperature of the safety temperature limiter does not exceed 110 °C the Pressure Equipment Directive (PED) requires" Sound Engineering Practice",
-   For boilers where the shut off temperature of the safety temperature limiter exceeds 110 °C this European Standard specifies the requirements of the PED as stated in Annex ZB.
NOTE 1   The "maximum allowable temperature TS" is defined in the PED and its Guidelines."
Boilers in accordance with this European Standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is up to 110 C and the maximum safety temperature limiter of 120 C. The maximum allowable operating pressure is 10 bar.
This standard does not apply to gas boilers with atmospheric burners, boilers for solid fuels, oil or gas fired condensation boilers, boilers with oil vaporisation burners. For these boilers there are further requirements.
For gas-fired central heating boilers equipped with a forced draught burner of nominal heat out put not exceeding 1000 kW,

  • Standard
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 303-4:1999(Main)
Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
SIST EN 303-4:1999

This standard is applicable to heating boilers with forced draught oil burners up to a nominal heat output of 70 kW. They are operated, either with negative pressure (natural draught boiler) or with positive pressure (pressurised boiler) in the combustion chamber, in accordance with the boiler manufacturer's instructions. This standard specifies the necessary terminology, the requirements on the materials and testing of them, and marking requirements for heating boilers.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14394:2005/prA1(Amendment)
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
SIST EN 14394:2006/kprA1:2008

PED and GAD related requirements

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1264-1:2021(Main)
Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols
SIST EN 1264-1:2021

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to the EN 14037 series and EN 14240.
EN 1264-1 specifies system types and characteristics of water based surface embedded radiant heating and cooling systems.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 303-1:2017(Main)
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
SIST EN 303-1:2017

This European Standard applies to boilers used for central heating (heating boilers) with forced draught burners with a nominal heat output not exceeding 1 000 kW, which are operated either with negative pressure (natural draught boilers) or with positive pressure (pressurized boiler) in the combustion chamber, in accordance with the boiler instructions.
This European Standard specifies the necessary terminology, the requirements on the materials and testing of them, and marking requirements for heating boilers.
Particular requirements for boilers that can be used with open vented systems are contained in EN 303 4.
The requirements of this standard apply to heating boilers that are tested on an authorized test rig.
Boilers in accordance with this standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is restricted to 100 °C. The maximum allowable operating pressure is 8 bar.
For boilers and water heaters (storage or continuous flow heater) this standard only applies to the parts which are necessarily subject to the operating conditions of the heating boiler (heating part).
This standard does not apply to gas boilers with atmospheric burners, boilers for solid fuels, boilers with oil vaporization burners. For these boilers there are further requirements.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14037-1:2016(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements
SIST EN 14037-1:2017

This European Standard defines technical specifications and requirements of free hanging prefabricated ceil-ing mounted radiant panels with an air gap between construction and the emitter (not embedded) fed with water at temperatures below 120 °C connected with a centralized heating supply source intended to be in-stalled in buildings.
The panels should be installed with an upper insulation.
The European Standard does not apply to independent heating devices.
The European Standard also defines the additional common data that the manufacturer has to provide to the trade in order to ensure the correct application of the products.
This European standard does not cover the performance of hanging accessories.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14394:2005+A1:2008(Main)
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
SIST EN 14394:2006+A1:2008

This European Standard specifies the requirements and test methods for the design, manufacturing, safe operation and the rational energy usage for standard boilers and low temperature boilers (with "boiler" in the sense of "boiler body") from steel and cast iron to be equipped with separately marketed forced draught burners according to the relevant burner standards (for automatic forced draught burners for gaseous fuels see EN 676 and for atomising oil burners see EN 267) up to a nominal heat output of 10 MW. They are operated, either with negative pressure (natural draught boiler) or with positive pressure (pressurised boiler) in the combustion chamber, in accordance with the boiler manufacturer's instructions."
This European Standard specifies requirements for boilers with normal operating temperatures between 100 °C and 110 °C and has a "dual structure":
-   For boilers where the shut off temperature of the safety temperature limiter does not exceed 110 °C the Pressure Equipment Directive (PED) requires" Sound Engineering Practice",
-   For boilers where the shut off temperature of the safety temperature limiter exceeds 110 °C this European Standard specifies the requirements of the PED as stated in Annex ZB.
NOTE 1   The "maximum allowable temperature TS" is defined in the PED and its Guidelines."
Boilers in accordance with this European Standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is up to 110 C and the maximum safety temperature limiter of 120 C. The maximum allowable operating pressure is 10 bar.
This standard does not apply to gas boilers with atmospheric burners, boilers for solid fuels, oil or gas fired condensation boilers, boilers with oil vaporisation burners. For these boilers there are further requirements.
For gas-fired central heating boilers equipped with a forced draught burner of nominal heat out put not exceeding 1000 kW,

  • Standard
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 303-4:1999(Main)
Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
SIST EN 303-4:1999

This standard is applicable to heating boilers with forced draught oil burners up to a nominal heat output of 70 kW. They are operated, either with negative pressure (natural draught boiler) or with positive pressure (pressurised boiler) in the combustion chamber, in accordance with the boiler manufacturer's instructions. This standard specifies the necessary terminology, the requirements on the materials and testing of them, and marking requirements for heating boilers.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 14037-1(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Technical specifications and requirements
oSIST prEN 14037-1:2012

This European Standard defines the technical specifications and requirements of ceiling mounted hot water radiant panels, heating and cooling surfaces fed with water at temperatures below 120 °C connected with a centralized heating and/or cooling supply source.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day