EN ISO 3166-1:2006

SLOVENSKI STANDARD
01-junij-2007
1DGRPHãþD
SIST EN ISO 3166-1:2003
Kode za predstavljanje imen držav in njihovih podrejenih enot - 1. del: Kode držav
(ISO 3166-1:2006)
Codes for the representation of names of countries and their subdivisions - Part 1:
Country codes (ISO 3166-1:2006)
Codes für die Namen von Ländern und deren Untereinheiten - Teil 1: Codes für
Ländernamen (ISO 3166-1:2006)
Codes pour la représentation des noms de pays et de leurs subdivisions - Partie 1:
Codes de pays (ISO 3166-1:2006)
Ta slovenski standard je istoveten z: EN ISO 3166-1:2006
ICS:
01.140.30 Dokumenti v upravi, trgovini Documents in administration,
in industriji. commerce and industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 3166-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 01.140.30 Supersedes EN ISO 3166-1:1997
English Version
Codes for the representation of names of countries and their
subdivisions - Part 1: Country codes (ISO 3166-1:2006)
Codes pour la représentation des noms de pays et de leurs Codes für die Namen von Ländern und deren
subdivisions - Partie 1: Codes de pays (ISO 3166-1:2006) Untereinheiten - Teil 1: Codes für Ländernamen (ISO 3166-
1:2006)
This European Standard was approved by CEN on 14 August 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3166-1:2006: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 3166-1:2006) has been prepared by Technical Committee ISO/TC 46
"Information and documentation" in collaboration with Technical Committee CEN/SS F17
"Administrative documents", the secretariat of which is held by CMC.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2007, and conflicting national standards
shall be withdrawn at the latest by May 2007.

This document supersedes EN ISO 3166-1:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 3166-1:2006 has been approved by CEN as EN ISO 3166-1:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 3166-1
NORME
Second edition
Deuxième édition
INTERNATIONALE
2006-11-15
Codes for the representation of names of
countries and their subdivisions —
Part 1:
Country codes
Codes pour la représentation des noms
de pays et de leurs subdivisions —
Partie 1:
Codes de pays
Reference number
Numéro de référence
ISO 3166-1:2006(E/F)
©
ISO 2006
ISO 3166-1:2006(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

©  ISO 2006
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2006 – All rights reserved/Tous droits réservés

ISO 3166-1:2006(E/F)
Contents Page
Foreword. vii
Introduction .xi
1 Scope .1
2 Normative references .1
3 Terms and definitions.1
4 Principles for inclusion in the list of country names .2
4.1 List.2
4.2 Source of names .3
4.3 Overlaps.3
4.4 Current status of names.3
4.5 Independent countries .4
5 Principles for allocation of code elements.4
5.1 Relationship with names.4
5.2 Construction of the alpha-2 code.4
5.3 Construction of the alpha-3 code.5
5.4 Construction of the numeric-3 code .5
5.5 Specification for use.5
5.6 User allocation .5
6 List of country names and their code elements .6
6.1 Content of the list .6
6.2 Choice of language, romanization, character set.7
6.3 Annexes .7
7 Maintenance .8
7.1 Introduction .8
7.2 Additions to the list of country names .9
7.3 Deletions from the list of country names .9
7.4 Alterations to country names or code elements .9
7.5 Reservation of code elements.10
8 Guidelines for users .11
8.1 Special provisions .11
8.2 Notification of use of this part of ISO 3166 .13
8.3 Advice regarding use .13
9 List one: Alphabetical list of country names in English and their code elements .14
10 List two: Alphabetical list of country names in French and their code elements.28
11 Index of the alpha-2 code elements with short form of country names, in English and
French .43
12 Index of the alpha-3 code elements with short form of country names, in English and
French .48
13 Index of the numeric-3 code elements with short form of country names, in English and
French .53
Annex A (normative) Alphabetical index of names from the list part appearing in the remarks
column, or forming the second significant part of composite country names in column 1.58
Annex B (informative) Alpha-2 to numeric-3 code element conversion table .62
ISO 3166-1:2006(E/F)
Annex C (informative) Numerical representation of the ISO 3166-1 alpha-2 code elements. 64
Annex D (info
...