EN 287-1:2004/A2:2006

SLOVENSKI STANDARD
01-julij-2006
Preskušanje varilcev - Talilno varjenje - 1. del: Jekla
Qualification test of welders - Fusion welding - Part 1: Steels
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers
Ta slovenski standard je istoveten z: EN 287-1:2004/A2:2006
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 287-1:2004/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 25.160.10
English Version
Qualification test of welders - Fusion welding - Part 1: Steels
Epreuve de qualification des soudeurs - Soudage par Prüfung von Schweißern - Schmelzschweißen - Teil 1:
fusion - Partie 1 : Aciers Stähle
This amendment A2 modifies the European Standard EN 287-1:2004; it was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 287-1:2004/A2:2006: E
worldwide for CEN national Members.

Foreword
This European Standard (EN 287-1:2004/A2:2006) has been prepared by Technical Committee CEN/TC 121
“Welding”, the secretariat of which is held by DIN.
This Amendment to the European Standard EN 287-1:2004 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting
national standards shall be withdrawn at the latest by September 2006.
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European
Standard.
According to the CEN/CENELEC Internal Reg
...