EN 1563:1997/A2:2005
(Amendment)Founding - Spheroidal graphite cast irons
Founding - Spheroidal graphite cast irons
This European Standard defines the grades and the corresponding requirements of spheroidal graphite cast iron. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: - separately cast test samples; - cast-on samples; - samples cut from arom a casting. This European Standard also specifies a classification as a function of hardness. This standard does not apply to spheroidal graphite cast iron used for pipes, fitting and accessories which are the subject of EN 545, EN 598, EN 969 and ISO 2531.
Gießereiwesen - Gusseisen mit Kugelgraphit
Fonderie - Fonte à graphite sphéroidal
Livarstvo – (Siva) litina s kroglastim grafitom – Dopolnilo A2
General Information
- Status
- Withdrawn
- Publication Date
- 26-Jul-2005
- Withdrawal Date
- 20-Dec-2011
- Technical Committee
- CEN/TC 190 - Foundry technology
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Dec-2011
- Completion Date
- 21-Dec-2011
Relations
- Effective Date
- 28-Dec-2011
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN 1563:1997/A2:2005 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Founding - Spheroidal graphite cast irons". This standard covers: This European Standard defines the grades and the corresponding requirements of spheroidal graphite cast iron. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: - separately cast test samples; - cast-on samples; - samples cut from arom a casting. This European Standard also specifies a classification as a function of hardness. This standard does not apply to spheroidal graphite cast iron used for pipes, fitting and accessories which are the subject of EN 545, EN 598, EN 969 and ISO 2531.
This European Standard defines the grades and the corresponding requirements of spheroidal graphite cast iron. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: - separately cast test samples; - cast-on samples; - samples cut from arom a casting. This European Standard also specifies a classification as a function of hardness. This standard does not apply to spheroidal graphite cast iron used for pipes, fitting and accessories which are the subject of EN 545, EN 598, EN 969 and ISO 2531.
EN 1563:1997/A2:2005 is classified under the following ICS (International Classification for Standards) categories: 77.080.10 - Irons. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1563:1997/A2:2005 has the following relationships with other standards: It is inter standard links to EN 1563:2011, EN 13445-6:2014, EN ISO 13927:2003, ENV 13381-7:2002, EN 1563:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1563:1997/A2:2005 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1563:1997/A2:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2005
Livarstvo – (Siva) litina s kroglastim grafitom – Dopolnilo A2
Founding - Spheroidal graphite cast irons
Gießereiwesen - Gusseisen mit Kugelgraphit
Fonderie - Fonte a graphite sphéroidal
Ta slovenski standard je istoveten z: EN 1563:1997/A2:2005
ICS:
77.080.10 Železo Irons
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 1563:1997/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 77.080.10
English version
Founding - Spheroidal graphite cast irons
Fonderie - Fonte à graphite sphéroidal Gießereiwesen - Gusseisen mit Kugelgraphit
This amendment A2 modifies the European Standard EN 1563:1997; it was approved by CEN on 20 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1563:1997/A2:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC .5
Foreword
This European Standard (EN 1563:1997/A2:2005) has been prepared by Technical Committee CEN/TC 190
“Foundry technology”, the secretariat of which is held by DIN.
This Amendment to the European Standard EN 1563:1997 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by January 2006, and conflicting na-
tional standards shall be withdrawn at the latest by January 2006.
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of a EU Directive.
For relationship with the EU Directive, see informative Annex ZA, which is an integral part of this European
Standard.
According to the CEN/CENELEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...