EN 13976-1:2018
(Main)Rescue systems - Transportation of incubators - Part 1: Interface requirements
Rescue systems - Transportation of incubators - Part 1: Interface requirements
This European Standard specifies the requirements for the interface between the ambulance and the incubator and the associated equipment, needed for care and treatment of infants, used in emergency or planned transports to ensure interchangeability and interoperability and to provide uninterrupted care of infants.
This European Standard does not give requirements for the vehicles, crafts, devices or incubators as such; these requirements are found in other standards. However, transport incubators are normally combined with other equipment to form a transport incubator system.
Rettungssysteme - Inkubatortransport - Teil 1: Anforderungen an Schnittstellen
Diese Europäische Norm legt die Anforderungen an die Schnittstellen zwischen dem Rettungsdienstfahrzeug und dem Inkubator sowie der dazugehörigen Ausrüstung fest, die bei Notfall- oder geplanten Transporten für die Pflege und Behandlung von Säuglingen erforderlich ist, um die Austauschbarkeit und Interfunktionsfähigkeit sicherzustellen und die ununterbrochene Pflege der Patienten zu ermöglichen.
In dieser Europäischen Norm sind keine Anforderungen an die Fahrzeuge, Luftfahrzeuge, Geräte oder Inkubatoren selbst festgelegt, diese Anforderungen finden sich in anderen Normen. Transportinkubatoren sind jedoch üblicherweise mit anderen Geräten verbunden und bilden ein „Inkubatortransportsystem“.
Systèmes de sauvetage - Transport d'incubateurs - Partie 1: Conditions d'interface
La présente Norme européenne spécifie les exigences relatives à l'interface entre l'ambulance et l'incubateur et les équipements associés, nécessaires pour les soins et le traitement des nourrissons, utilisé en cas de transports d'urgence ou prévus, pour assurer l'interchangeabilité et l'interopérabilité et pour fournir des soins sans interruption aux patients.
La présente Norme européenne ne donne pas d'exigences pour les véhicules, les aéronefs, les dispositifs ou incubateurs en tant que tels; ces exigences se trouvent dans d'autres normes. Cependant, les incubateurs de transport sont normalement combinés avec d'autres équipements pour former un "système de transport d'incubateur ".
Reševalni sistemi - Prevoz inkubatorjev - 1. del: Pogoji za vmesnike
Ta evropski standard določa zahteve za vmesnike med reševalnim vozilom ter inkubatorjem in povezano opremo, potrebno za nego in zdravljenje dojenčkov, ki se uporabljajo pri reševalnih ali načrtovanih prevozih za zagotavljanje zamenljivosti in interoperabilnosti ter nemotene oskrbe bolnikov.
Ta evropski standard ne podaja zahtev za sama vozila, objekte, naprave ali inkubatorje; te zahteve so navedene v drugih standardih. Vendar pa se transportni inkubatorji običajno uporabljajo skupaj z drugo opremo, ki sestavlja »sistem za transport inkubatorja«.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Reševalni sistemi - Prevoz inkubatorjev - 1. del: Pogoji za vmesnikeRettungssysteme - Inkubatortransport - Teil 1: Anforderungen an SchnittstellenSystèmes de sauvetage - Transport d'incubateurs - Partie 1 : Conditions d'interfaceRescue systems - Transportation of incubators - Part 1: Interface conditions11.160First aid11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 13976-1:2018SIST EN 13976-1:2018en01-september-2018SIST EN 13976-1:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13976-1
June
t r s z ICS
s sä r v rä s râ
s sä s x r Supersedes EN
s u { y xæ sã t r s sEnglish Version
Rescue systems æ Transportation of incubators æ Part
sã Interface requirements Systèmes de sauvetage æ Transport d 5incubateurs æ Partie
sã Exigences d 5interface
Rettungssysteme æ Inkubatortransport æ Teil
sã Schnittstellenanforderungen This European Standard was approved by CEN on
s r January
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u { y xæ sã t r s z ESIST EN 13976-1:2018
Rationale regarding power use . 12 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 93/42/EEC [OJ L 169] aimed to be covered . 13 Bibliography . 14
Key 1 Transport incubator system NOTE Example of
components that could be included in a TIS: 1.1
Incubator 1.2
Syringe pump 1.3
Ventilator 1.4
Monitor 2 Track system 2.1 Track studs 2.2 Track rails 3 Interface to be used if track rails cannot be fixed directly to the stretcher system. If the interface is to be attached to undercarriage, original fixation points on the undercarriage should be used 4 Stretcher system (stretcher/undercarriage/stretcher support, etc.) NOTE When a TIS is permanently fixed to an undercarriage, the undercarriage will form an integral part of the TIS. Figure 1 — Transport incubator system with undercarriage fixation 4 Requirements 4.1 Fixation 4.1.1 Fixation of the transport incubator system in a road ambulance shall comply with EN 1789:2007+A2:2014 and in air ambulances with EN 13718-1:2014 and EN 13718-2:2015, irrespective of whether the transport incubator system is supported by a stretcher system. SIST EN 13976-1:2018
Key pin A Ground pin B 12 V pin C 24/28 V pin D not connected Figure 2 — Four pole reverse bayonet coupling according to MIL-DTL-5015H
Figure 3 — box mount receptacle for front panel mounting Table 2 — Dimensions for box mount receptacle for front panel mounting according to MIL-DTL-5015H Dimensions in millimetres Shell Size L ±0,3 M + 0,4 - 0,0 N +0,00 - 0,15 P ±0,2 R ±0,1 S ±0,3 T Thru Hole + 0,1 - 0,0 T1 Metric Thread KK Max. 18 33,8 23,0 30,8 4,0 27,0 35,0 3,2 M4 25,6 SIST EN 13976-1:2018
Figure 4 — Straight plug Table 3 — Dimension for the straight plug according to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.