EN 12373-15:2000
(Main)Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation
Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation
This part of this European Standard specifies an empirical method for assessing the resistance of anodic oxidation coatings to cracking by deformation. The method is applicable particularly to sheet material with anodic oxidation coatings of thickness less than 5 micrometres, and is useful for development purposes.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 15: Prüfung der Beständigkeit von anodisch erzeugten Oxidschichten gegen Rißbildung bei Verformung
Dieser Teil dieser Europäischen Norm legt ein empirisches Verfahren zur Prüfung der Beständigigkeit anodisch erzeugter Oxidschichten gegen Rißbildung durch Verformung fest. Das Verfahren ist besonders bei Blech mit dünnen erzeugten Oxidschichten kleiner 5 microm anwendbar und für Entwicklungßwecke von Nutzen.
Aluminium et alliages d'aluminium - Anodisation - Partie 15: Evaluation de la résistance des couches anodiques à la formation de criques par déformation
La présente partie de cette norme européenne spécifie une méthode de contrôle empirique permettant d'évaluer la résistance des couches anodiques à la formation de criques par déformations. Cette méthode s'applique particulièrement aux tôles recouvertes d'une mince couche anodique d'épaisseur inférieure à 5 micromètres et trouve son application en particulier en développement.
Aluminij in aluminijeve zlitine - Anodizacija - 15. del: Ocenjevanje odpornosti anodizirane plasti proti razpokanju zaradi deformacije
General Information
- Status
- Withdrawn
- Publication Date
- 22-Aug-2000
- Withdrawal Date
- 31-Aug-2010
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Sep-2010
- Completion Date
- 01-Sep-2010
Relations
- Effective Date
- 06-Sep-2010
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 12373-15:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation". This standard covers: This part of this European Standard specifies an empirical method for assessing the resistance of anodic oxidation coatings to cracking by deformation. The method is applicable particularly to sheet material with anodic oxidation coatings of thickness less than 5 micrometres, and is useful for development purposes.
This part of this European Standard specifies an empirical method for assessing the resistance of anodic oxidation coatings to cracking by deformation. The method is applicable particularly to sheet material with anodic oxidation coatings of thickness less than 5 micrometres, and is useful for development purposes.
EN 12373-15:2000 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-15:2000 has the following relationships with other standards: It is inter standard links to EN ISO 3211:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-15:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Anodizacija - 15. del: Ocenjevanje odpornosti anodizirane plasti proti razpokanju zaradi deformacijeAluminium und Aluminiumlegierungen - Anodisieren - Teil 15: Prüfung der Beständigkeit von anodisch erzeugten Oxidschichten gegen Rißbildung bei VerformungAluminium et alliages d'aluminium - Anodisation - Partie 15: Evaluation de la résistance des couches anodiques a la formation de criques par déformationAluminium and aluminium alloys - Anodizing
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...