iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 22163:2024/A1:2025

(Amendment)

Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector - Amendment 1: Climate action changes (ISO 22163:2023/Amd 1:2024)

Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector - Amendment 1: Climate action changes (ISO 22163:2023/Amd 1:2024)

Bahnanwendungen - Eisenbahn-Qualitätsmanagementsystem - ISO 9001:2015 und spezifische Anforderungen für die Anwendung im Bahnsektor - Änderung 1: Ergänzungen zu klimabezogenen Maßnahmen (ISO 22163:2023/Amd 1:2024)

Applications ferroviaires - Système de management de la qualité ferroviaire - Exigences de l'ISO 9001:2015 et exigences particulières concernant les applications dans le secteur ferroviaire - Amendement 1: Changements concernant les actions en lien avec le climat (ISO 22163:2023/Amd 1:2024)

Železniške naprave - Sistem vodenja kakovosti v železniškem prometu - ISO 9001:2015 in posebne zahteve za uporabo v železniškem sektorju - Dopolnilo A1: Spremembe podnebnih ukrepov (ISO 22163:2023/Amd 1:2024)

General Information

Status
Published
Publication Date
07-Jan-2025
ICS
03.100.70 - Management systems
45.020 - Railway engineering in general
Technical Committee
CEN/TC 256 - Railway applications
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Jan-2025
Due Date
08-Jan-2025
Completion Date
08-Jan-2025
Ref Project
SIST EN ISO 22163:2024/A1:2025 - Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector - Amendment 1: Climate action changes (ISO 22163:2023/Amd 1:2024)

Relations

Amends
EN ISO 22163:2024 - Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)
Effective Date
26-Jun-2024

Buy Standard

EN ISO 22163:2024/A1:2025EN ISO 22163:2024/A1:2025
PreviousNext
Amendment
EN ISO 22163:2024/A1:2025
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2025
Železniške naprave - Sistem vodenja kakovosti v železniškem prometu - ISO
9001:2015 in posebne zahteve za uporabo v železniškem sektorju - Dopolnilo A1:
Spremembe podnebnih ukrepov (ISO 22163:2023/Amd 1:2024)
Railway applications - Railway quality management system - ISO 9001:2015 and specific
requirements for application in the railway sector - Amendment 1: Climate action
changes (ISO 22163:2023/Amd 1:2024)
Bahnanwendungen - Eisenbahn-Qualitätsmanagementsystem - ISO 9001:2015 und
spezifische Anforderungen für die Anwendung im Bahnsektor - Änderung 1:
Ergänzungen zu klimabezogenen Maßnahmen (ISO 22163:2023/Amd 1:2024)
Applications ferroviaires - Système de management de la qualité ferroviaire - Exigences
de l'ISO 9001:2015 et exigences particulières concernant les applications dans le
secteur ferroviaire - Amendement 1: Actions relatives aux changements climatiques (ISO
22163:2023/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 22163:2024/A1:2025
ICS:
03.100.70 Sistemi vodenja Management systems
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22163:2024/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2025
EUROPÄISCHE NORM
ICS 45.020; 03.100.70
English Version
Railway applications - Railway quality management
system - ISO 9001:2015 and specific requirements for
application in the railway sector - Amendment 1: Climate
action changes (ISO 22163:2023/Amd 1:2024)
Applications ferroviaires - Système de management de Bahnanwendungen - Eisenbahn-
la qualité ferroviaire - Exigences de l'ISO 9001:2015 et Qualitätsmanagementsystem - ISO 9001:2015 und
exigences particulières concernant les applications spezifische Anforderungen für die Anwendung im
dans le secteur ferroviaire - Amendement 1: Bahnsektor - Änderung 1: Ergänzungen zu
Changements concernant les actions en lien avec le klimabezogenen Maßnahmen (ISO 22163:2023/Amd
climat (ISO 22163:2023/Amd 1:2024) 1:2024)
This amendment A1 modifies the European Standard EN ISO 22163:2024; it was approved by CEN on 22 December 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22163:2024/A1:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 22163:2023/Amd 1:2024 has been prepared by Technical Committee ISO/TC 269
"Railway applications” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 22163:2024/A1:2025 by Technical Committee CEN/TC 256 “Railway applications” the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 22163:2024 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2025, and
conflicting national standards shall be withdrawn at the latest by July 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards orga
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 22163:2024(Main)
Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)
SIST EN ISO 22163:2024

This document specifies requirements for a quality management system when an organization:
a)    needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b)    aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this document are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE 1    In this document, the terms “product” or “service” only apply to products and services intended for, or required by, a customer.
NOTE 2    Statutory and regulatory requirements can be expressed as legal requirements.
This document specifies the requirements for a railway quality management system (RQMS)
—    applicable throughout the whole supply chain of the railway sector related to industrial products and services,
—    providing continual improvement, emphasizing defect prevention and defect reduction in the supply chain, and
—    enhancing and sustaining product quality, including its safety aspects.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22163:2024(Main)
Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)
SIST EN ISO 22163:2024

This document specifies requirements for a quality management system when an organization:
a)    needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b)    aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this document are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE 1    In this document, the terms “product” or “service” only apply to products and services intended for, or required by, a customer.
NOTE 2    Statutory and regulatory requirements can be expressed as legal requirements.
This document specifies the requirements for a railway quality management system (RQMS)
—    applicable throughout the whole supply chain of the railway sector related to industrial products and services,
—    providing continual improvement, emphasizing defect prevention and defect reduction in the supply chain, and
—    enhancing and sustaining product quality, including its safety aspects.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17997:2025(Main)
Railway applications - Braking - Definition of ETCS brake curve parameters for Gamma trains
SIST EN 17997:2025

This document specifies the methodology to define the train related braking model and required emergency and service brake on-board parameters to enable speed and distance monitoring for trains equipped and operated on railway lines using ETCS Baseline 3.
This document is only applicable for ETCS Gamma braking model trains (i.e. the train is said to be a “gamma” train). This document does not specify the way these parameters are transferred to and can be used by the ETCS on-board system (e.g. during start of mission - SoM).
The ETCS “conversion models” are not covered by this document and are described in EN 16834:2019, Annex F. The ETCS “conversion models” are intended for use with trains where the braking performance is expressed using braked weight percentages (“lambda” train).
Any trackside related input parameters, including national values, are not covered in this document. Information can be found in the SUBSET-026 (see [11]).

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18363-2:2025(Main)
Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol (ISO 18363-2:2025)
oSIST prEN ISO 18363-2:2024

This document specifies a procedure for the parallel determination of glycidol together with 2-MCPD and 3-MCPD present in bound or free form in oils and fats. The method is based on alkaline-catalysed ester cleavage, transformation of the released glycidol into monobromopropanediol (MBPD) and derivatisation of the derived free diols (MCPD and MBPD) with phenylboronic acid (PBA). Though free MCPD and glycidol are supposed to be present in fats and oils in low to negligible quantities only, in the event that free analytes are present, they would contribute proportionately to the results. The results always being the sum of the free and the bound form of a single analyte.
This method is applicable to solid and liquid fats and oils. This document can also apply to animal fats and used frying oils and fats, but a validation study is undertaken before the analysis of these matrices.
Milk and milk products (or fat coming from milk and milk products) are excluded from the scope of this document.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16823:2025(Main)
Non-destructive testing - Ultrasonic testing - Through-transmission technique (ISO 16823:2025)
oSIST prEN ISO 16823:2024

This document specifies the principles of ultrasonic through-transmission techniques.
Through-transmission techniques can be used for:
—     detection of discontinuities;
—     determination of sound attenuation.
The general principles required for the use of ultrasonic testing of industrial products are described in ISO 16810.
The through-transmission technique is used for the testing of flat products, e.g. plates and sheets.
Further, it can be used for tests, for example:
—     where the shape, dimensions or orientation of possible discontinuities are unfavourable for direct reflection;
—     of materials with high sound attenuation;
—     on thin test objects.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16486-3:2025(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2025)
kSIST FprEN ISO 16486-3:2024

This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels.
It also specifies the test parameters for the test methods to which it refers.
The ISO 16486 series is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing.
In particular, this document lays down dimensional characteristics and requirements for the marking of fittings.
In conjunction with the other parts of the ISO 16486 series, this document is applicable to PA-U fittings, their joints, joints with components of PA-U and joints with mechanical fittings of other materials, and to the following fitting types:
—     fusion fittings (electrofusion fittings and butt fusion fittings), and
—     transition fittings.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3961:2025(Main)
Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:2024)
SIST EN ISO 3961:2025

This document specifies a reference method for the determination of the iodine value (commonly known in the industry as IV) of animal and vegetable fats and oils, hereinafter referred to as fats.
Annex B describes a method for the calculation of the IV from fatty acid compositional data. This method is not applicable to fish oils. Furthermore, cold-pressed, crude and unrefined vegetable oils as well as (partially) hydrogenated oils can give different results by the two methods. The calculated IV is affected by impurities and thermal degradation products.
NOTE            The method in Annex B is based upon the AOCS Official method Cd 1c-85[10].

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8044:2025(Main)
Corrosion of metals and alloys - Vocabulary (ISO 8044:2024)
SIST EN ISO 8044:2025

This document defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations.
Throughout the document, International Union of Pure and Applied Chemistry rules for electrode potential signs are applied. The term “metal” is also used to include alloys and other metallic materials.
Terms and definitions related to the inorganic surface treatment of metals are given in ISO 2080.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23675:2025(Main)
Cosmetics - Sun protection test methods - In vitro determination of sun protection factor (SPF) (ISO 23675:2024)
kSIST FprEN ISO 23675:2024

This document specifies a method for the in vitro determination of sun protection factor (SPF). This method is applicable to sunscreen products in form of an emulsion or alcoholic one-phase formulation, excluding in form of a loose or compressed powder or stick. Specifications are given to enable determination of the spectral absorbance characteristics of SPF protection in a reproducible manner.
Use of this method is strictly for the determination of a static sun protection factor. It is not applicable for the determination of water-resistance properties of a sun protection product.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14538:2025(Main)
Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, Mg, Na, K and P content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
SIST EN 14538:2025

This document specifies a procedure for the direct determination of the content of the soap building elements Calcium (Ca), Magnesium (Mg), Sodium (Na) and Potassium (K) as well as Phosphorus (P) in fatty acid methyl esters (FAME) by ICP OES.
The concentrations of each component or the combinations of some to which this method is applicable are given in Table 1.
Table 1 - Scope ranges for each element
Element   Scope range
mg/kg
Ca   0,3 - 5,4
Mg   0,3 - 4,6
Na   0,4 - 5,0
K   0,6 - 5,3
P   1,0 - 5,0
Ca + Mg   0,5 - 9,4
Na + K   1,0 - 9,9
Ca + Mg + Na + K   1,4 - 19,3
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
NOTE   For the purposes of this document, the term "% (V/V)" is used to represent the volume fraction, φ, of a material.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day