iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16028:2012

(Main)

Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications

Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications

This European Standard specifies the requirements of lubricants intended for lubrication of the wheel-rail interface between the wheel flange and the rail gauge corner (active interface) applied either directly or indirectly to the wheel flange or to the rail to achieve an acceptable level of friction and wear.
It covers the approval procedure, the method of testing and routine control/monitoring of the lubricant.

Bahnanwendungen - Spurkranzschmierung - Prüfung der Schmierstoffe

Diese Europäische Norm legt die Anforderungen an Schmierstoffe fest, die für die Schmierung der Kontakt-fläche zwischen Spurkranz und der Schienenkopfflanke (aktive Kontaktfläche) vorgesehen sind und die entweder direkt oder indirekt auf den Spurkranz oder die Schiene aufgetragen werden, um einen akzeptablen Grad von Reibung und Verschleiß zu erreichen.
Sie deckt das Freigabeverfahren, die Art der Prüfung sowie die Betriebskontrolle/Überwachung des Schmierstoffes ab.

Applications ferroviaires - Gestion des frottements roue/rail - Lubrifiants pour les applications embarquées et fixes de voie

La présente Norme européenne spécifie les exigences des lubrifiants destinés à la lubrification de l’interface roue-rail entre le boudin de roue et le rayon de guidage de rail (interface active) appliqué directement ou indirectement au boudin de roue ou au rail pour permettre un niveau acceptable de frottement et d’usure.
Elle couvre la procédure d’approbation, la méthode d’essai et le contrôle ou la surveillance en production de série du lubrifiant.

Železniške naprave - Trenje na stiku kolo/tirnica - Maziva za mazalke na vozilih in za tirne mazalke

Ta evropski standard določa zahteve glede maziv za mazanje vmesnika kolo/tirnica med kolesno prirobnico in kotom tirne širine (aktivni vmesnik), ki se nanese neposredno ali posredno na kolesno prirobnico ali na tirnico, da bi se dosegla sprejemljiva raven trenja in obrabe. Vključuje postopek odobritve, preskusno metodo in nadzor kakovosti/spremljanje maziva.

General Information

Status
Withdrawn
Publication Date
17-Jul-2012
Withdrawal Date
17-May-2022
ICS
45.040 - Materials and components for railway engineering
75.100 - Lubricants, industrial oils and related products
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/SC 2/WG 38 - Flange lubrication
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-May-2022
Directive
2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
96/48/EC - Interoperability of the trans-European high-speed rail system
Mandate
M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 16028:2012 - Railway appllications - Wheel/rail friction management - Lubricants for trainborne and trackside applications

Relations

Replaced By
EN 15427-2-1:2022 - Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants
Effective Date
25-Apr-2018

Buy Standard

EN 16028:2012 - BARVEEN 16028:2012 - BARVE
PreviousNext
Standard
EN 16028:2012 - BARVE
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Trenje na stiku kolo/tirnica - Maziva za mazalke na vozilih in za tirne mazalkeBahnanwendungen - Spurkranzschmierung - Prüfung der SchmiermittelApplications ferroviaires - Gestion des frottements roue/rail - Lubrifiants pour les applications embarquées et fixes de voieRailway appllications - Wheel/rail friction management - Lubricants for trainborne and trackside applications75.100MazivaLubricants, industrial oils and related products45.040Materiali in deli za železniško tehnikoMaterials and components for railway engineeringICS:Ta slovenski standard je istoveten z:EN 16028:2012SIST EN 16028:2012en,fr01-oktober-2012SIST EN 16028:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16028
July 2012 ICS 45.040; 75.100 English Version
Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
Applications ferroviaires - Gestion des frottements roue/rail - Lubrifiants pour les applications embarquées et fixes de voie
Bahnanwendungen - Spurkranzschmierung - Prüfung der Schmierstoffe This European Standard was approved by CEN on 9 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16028:2012: ESIST EN 16028:2012

Requirements for lubricants and testing . 15Annex B (normative)
Water wash-off test . 27B.1Purpose . 27B.2Short description . 27B.3Conditions for testing . 27B.4Test process . 27Annex C (informative)
Corrosion test on steel . 30C.1Purpose . 30C.2Short description . 30C.3Conditions for testing . 30C.4Test process . 31Annex D (informative)
Behaviour at an elevated temperature – Adhesion on steel sheet . 32D.1Purpose . 32D.2Short description . 32D.3Conditions for test . 32D.4Test process . 32Annex E (informative)
Determination of the volatile constituents in greases . 34E.1Purpose . 34E.2Short description . 34E.3Conditions for testing . 34E.4Test process . 35E.5Recording of test results . 35Annex F (informative)
Peak forming and droop . 36F.1Purpose . 36F.2Short description . 36F.3Conditions for testing . 36F.4Test process . 36SIST EN 16028:2012

Low-temperature torque (rheometer measurement at -20 °C and -30 °C) . 39G.1Purpose . 39G.2Short description . 39G.3Conditions for test . 39G.4Test process . 40Annex H (informative)
Miscibility with flange/rail lubricants in use – greases . 43H.1Purpose . 43H.2Short description . 43H.3Conditions for testing . 43H.4Test process . 44Annex I (informative)
Miscibility with flange/rail lubricants in use – oils . 45I.1Purpose . 45I.2Short description . 45I.3Conditions for testing . 45I.4Test process . 46Annex J (informative)
Determination of low temperature cone penetration of greases . 47J.1Purpose . 47J.2Short description . 47J.3Conditions for test . 47J.4Test process . 47Annex K (informative)
Functional test on specific equipment . 49K.1General . 49K.2Flowing behaviour of wheel-flange greases . 49K.3Test of spraying of oils at various temperatures . 51Annex L (informative)
Solid stick testing on twin-disc machine . 55L.1Purpose . 55L.2Short description . 55L.3Conditions for test . 55L.4Test process . 58L.5Test results . 58Annex M (informative)
Lubricant product performance - Field assessment . 60M.1General . 60M.2Product performance assessment . 60Bibliography . 61 SIST EN 16028:2012
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15427-2-1:2022(Main)
Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants
SIST EN 15427-2-1:2022

This document specifies the properties and characteristics of lubricants applied to the interface between the wheel flange and the gauge face of the rail, and contact area between the check rail face and the back of the wheel (active interface), either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the lubricant.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-2:2006+A2:2010(Main + Amendment)
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
SIST EN 14865-2:2006+A2:2011

This European Standard specifies a test method and sets the acceptance criteria for the determination of the mechanical stability of lubricating greases intended for the lubrication of axlebox bearings according to EN 12081. In the test, impacts are applied to the lubricating grease so that only very stable lubricating greases will perform acceptably. The method is used in a discrimination process for finding lubricating greases of such mechanical stability that they are considered accepted lubricating greases for more extensive performance tests according to EN 12082.
For purposes of quality assurance and quality control, this test method is also used for batch testing of lubricating greases.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-1:2009+A1:2010(Main + Amendment)
Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
SIST EN 14865-1:2010+A1:2011

This European Standard specifies a testing method and sets the acceptance criteria for the determining of the lubrication ability of lubricating greases intended for the lubrication of axlebox bearings. The lubricating ability, primarily related to the capability of lubricating greases to protect against wear, is determined in a roller bearing lubricant test rig. Wear of the rolling bearing rollers, the frictional behaviour and temperature during the test are used to discriminate between lubricating greases.
NOTE 1   The testing method is referred to in EN 12081.
The method described is carried out in order to test axlebox greases for ordinary-speed vehicles, with speeds up to 200 km/h, and for greases intended for high-speed vehicles, with speeds up to 300 km/h. The method is a discriminating process, and those greases that pass will be subject to more extensive performance tests.
NOTE 2   In EN 12082 a more extensive rig performance test is described in detail. This rig performance test will check the satisfactory function of the assembly of box housing, bearing, sealing and grease during a simulated journey.
For purpose of quality assurance and quality control, this test method is also used for batch testing of greases intended for use in axleboxes.
For light rail and tramway applications other standards or documents agreed between the customer and the supplier may be applied.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-2:2006/FprA2(Amendment)
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
SIST EN 14865-2:2006/kFprA2:2010

This European Standard specifies a test method and sets the acceptance criteria for the determination of the mechanical stability of lubricating greases intended for the lubrication of axlebox bearings according to EN 12081. In the test, impacts are applied to the lubricating grease so that only very stable lubricating greases will perform acceptably. The method is used in a discrimination process for finding lubricating greases of such mechanical stability that they are considered accepted lubricating greases for more extensive performance tests according to EN 12082.
For purposes of quality assurance and quality control, this test method is also used for batch testing of lubricating greases.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12082:2007/FprA1(Amendment)
Railway applications - Axleboxes - Performance testing
SIST EN 12082:2008/kFprA1:2010

This European Standard specifies the quality requirements of greases intended for the lubrication of axlebox rolling bearings according to EN 12080, required for reliable operation of trains on European networks. It covers the approval procedure, the method of quality control and quality monitoring of the grease. The grease requirements are given for two speed classes.

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-1:2009/FprA1(Amendment)
Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
SIST EN 14865-1:2010/kFprA1:2010

This European Standard specifies a testing method and sets the acceptance criteria for the determining of the lubrication ability of lubricating greases intended for the lubrication of axlebox bearings. The lubricating ability, primarily related to the capability of lubricating greases to protect against wear, is determined in a roller bearing lubricant test rig. Wear of the rolling bearing rollers, the frictional behaviour and temperature during the test are used to discriminate between lubricating greases.
NOTE 1   The testing method is referred to in EN 12081.
The method described is carried out in order to test axlebox greases for ordinary-speed vehicles, with speeds up to 200 km/h, and for greases intended for high-speed vehicles, with speeds up to 300 km/h. The method is a discriminating process, and those greases that pass will be subject to more extensive performance tests.
NOTE 2   In EN 12082 a more extensive rig performance test is described in detail. This rig performance test will check the satisfactory function of the assembly of box housing, bearing, sealing and grease during a simulated journey.
For purpose of quality assurance and quality control, this test method is also used for batch testing of greases intended for use in axleboxes.
For light rail and tramway applications other standards or documents agreed between the customer and the supplier may be applied.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15427-2-1:2022(Main)
Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants
SIST EN 15427-2-1:2022

This document specifies the properties and characteristics of lubricants applied to the interface between the wheel flange and the gauge face of the rail, and contact area between the check rail face and the back of the wheel (active interface), either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the lubricant.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-1:2009+A1:2010(Main + Amendment)
Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
SIST EN 14865-1:2010+A1:2011

This European Standard specifies a testing method and sets the acceptance criteria for the determining of the lubrication ability of lubricating greases intended for the lubrication of axlebox bearings. The lubricating ability, primarily related to the capability of lubricating greases to protect against wear, is determined in a roller bearing lubricant test rig. Wear of the rolling bearing rollers, the frictional behaviour and temperature during the test are used to discriminate between lubricating greases.
NOTE 1   The testing method is referred to in EN 12081.
The method described is carried out in order to test axlebox greases for ordinary-speed vehicles, with speeds up to 200 km/h, and for greases intended for high-speed vehicles, with speeds up to 300 km/h. The method is a discriminating process, and those greases that pass will be subject to more extensive performance tests.
NOTE 2   In EN 12082 a more extensive rig performance test is described in detail. This rig performance test will check the satisfactory function of the assembly of box housing, bearing, sealing and grease during a simulated journey.
For purpose of quality assurance and quality control, this test method is also used for batch testing of greases intended for use in axleboxes.
For light rail and tramway applications other standards or documents agreed between the customer and the supplier may be applied.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-2:2006+A2:2010(Main + Amendment)
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
SIST EN 14865-2:2006+A2:2011

This European Standard specifies a test method and sets the acceptance criteria for the determination of the mechanical stability of lubricating greases intended for the lubrication of axlebox bearings according to EN 12081. In the test, impacts are applied to the lubricating grease so that only very stable lubricating greases will perform acceptably. The method is used in a discrimination process for finding lubricating greases of such mechanical stability that they are considered accepted lubricating greases for more extensive performance tests according to EN 12082.
For purposes of quality assurance and quality control, this test method is also used for batch testing of lubricating greases.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14865-2:2006/FprA2(Amendment)
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
SIST EN 14865-2:2006/kFprA2:2010

This European Standard specifies a test method and sets the acceptance criteria for the determination of the mechanical stability of lubricating greases intended for the lubrication of axlebox bearings according to EN 12081. In the test, impacts are applied to the lubricating grease so that only very stable lubricating greases will perform acceptably. The method is used in a discrimination process for finding lubricating greases of such mechanical stability that they are considered accepted lubricating greases for more extensive performance tests according to EN 12082.
For purposes of quality assurance and quality control, this test method is also used for batch testing of lubricating greases.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day