EN 1012-2:1996
(Main)Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPa (750 mbar) absolute, (i.e. vacuum cleaners, ventilation fans). Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.
Kompressoren und Vakuumpumpen - Sicherheitsanforderungen - Teil 2: Vakuumpumpen
Diese Norm gilt für alle Vakuumpumpen, Vakuumpumpenkombinationen und Vakuumpumpsysteme. Die Norm listet die besonders mit Vakuumpumpen verbundenen Gefährdungen auf und legt Sicherheitsanforderungen fest, die bei Konstruktion, Aufstellung, Betrieb, Instandhaltung und Auseinandernehmen von Vakuumpumpen während ihrer zu erwartenden Lebensdauer und nachfolgenden Entsorgung anzuwenden sind.
Compresseurs et pompes à vide - Prescriptions de sécurité - Partie 2: Pompes à vide
La présente norme est applicable à toutes les pompes à vide, combinaisons et systèmes de pompes à vide. La présente norme énumère les risques significatifs associés aux pompes à vide et prescrit les exigences de sécurité applicables à la conception, à l'installation, au fonctionnement, à la maintenance et au démontage des pompes à vide au cours de leur durée de vie prévisible et de leur mise au rebut ultérieure.
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
General Information
- Status
- Withdrawn
- Publication Date
- 16-Apr-1996
- Withdrawal Date
- 29-Sep-2009
- Technical Committee
- CEN/TC 232 - Compressors - Safety
- Drafting Committee
- CEN/TC 232 - Compressors - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Sep-2009
- Completion Date
- 30-Sep-2009
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Merged Into
EN 1012-2:1996+A1:2009 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps - Effective Date
- 19-Jan-2023
- Amended By
EN 1012-2:1996/prA1 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps - Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1012-2:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps". This standard covers: This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPa (750 mbar) absolute, (i.e. vacuum cleaners, ventilation fans). Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.
This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPa (750 mbar) absolute, (i.e. vacuum cleaners, ventilation fans). Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.
EN 1012-2:1996 is classified under the following ICS (International Classification for Standards) categories: 23.080 - Pumps; 23.140 - Compressors and pneumatic machines; 23.160 - Vacuum technology. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1012-2:1996 has the following relationships with other standards: It is inter standard links to EN 1012-2:1996+A1:2009, EN 1012-2:1996/prA1; is excused to EN 1012-1:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1012-2:1996 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1012-2:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumpsKompressoren und Vakuumpumpen - Sicherheitsanforderungen - Teil 2: VakuumpumpenCompresseurs et pompes a vide - Prescriptions de sécurité - Partie 2: Pompes a videCompressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps23.160Vakumska tehnologijaVacuum technology23.140VWURMLCompressors and pneumatic machinesICS:Ta slovenski standard je istoveten z:EN 1012-2:1996SIST EN 1012-2:2001en01-junij-2001SIST EN 1012-2:2001SLOVENSKI
STANDARD
SI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...