CEN/TR 17309:2019
(Main)Test methods for environmental characterization of solid matrices - Guide to flash point testing
Test methods for environmental characterization of solid matrices - Guide to flash point testing
The flash point test can be summarised as a procedure where a test portion is introduced into a temperature controlled test cup and an ignition source is applied to the vapours produced by the test portion to determine if the vapour / air mixture is flammable or at what temperature the vapour / air mixture is flammable.
This document is not intended to be a comprehensive manual on flash point tests and the interpretation of test results, however it covers the key aspects on these subjects.
Prüfverfahren für die umweltbezogene Charakterisierung fester Matrices - Anleitung zur Prüfung des Flammpunkts
Caractérisation des déchets - Lignes directrices pour la détermination du point d'éclair
L’essai de détermination du point d’éclair peut être brièvement défini comme un processus consistant à introduire une prise d’essai dans un vase d’essai à température contrôlée et à appliquer une source d’inflammation au contact des vapeurs dégagées par la prise d’essai, afin de déterminer si le mélange vapeur/air est inflammable ou la température à laquelle il est inflammable.
Le présent document n’est pas destiné à être un manuel explicatif traitant des méthodes de détermination du point d’éclair et de l’interprétation des résultats ; il couvre néanmoins les aspects fondamentaux relatifs à ces sujets.
Preskusne metode za karakterizacijo trdnih matriksov z vidika okolja - Vodilo za preskušanje plamenišča
Preskušanje plamenišča je mogoče povzeti kot postopek, pri katerem se preskusni del vstavi v preskusno posodo z nadzorovano temperaturo in se vir vžiga prenese na hlape, ki jih proizvaja preskusni del, da se ugotovi, ali je zmes hlapi/zrak vnetljiva oziroma pri kateri temperaturi se mešanica hlapi/zrak vname.
Ta dokument ni celovit priročnik o preskušanju plamenišča in razlagi rezultatov preskušanja, vendar zajema ključne vidike teh tem.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 17309:2019
01-julij-2019
Preskusne metode za karakterizacijo trdnih matriksov z vidika okolja - Vodilo za
preskušanje plamenišča
Test methods for environmental characterization of solid matrices - Guide to flash point
testing
Charakterisierung von Abfällen - Anleitung zur Prüfung des Flammpunkts
Caractérisation des déchets - Lignes directrices pour la détermination du point d'éclair
Ta slovenski standard je istoveten z: CEN/TR 17309:2019
ICS:
13.030.01 Odpadki na splošno Wastes in general
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
SIST-TP CEN/TR 17309:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 17309:2019
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 17309:2019
CEN/TR 17309
TECHNICAL REPORT
RAPPORT TECHNIQUE
May 2019
TECHNISCHER BERICHT
ICS 13.220.40; 13.030.01
English Version
Test methods for environmental characterization of solid
matrices - Guide to flash point testing
Caractérisation des déchets - Lignes directrices pour la Prüfverfahren für die umweltbezogene
détermination du point d'éclair Charakterisierung fester Matrices - Anleitung zur
Prüfung des Flammpunkts
This Technical Report was approved by CEN on 19 November 2018. It has been drawn up by the Technical Committee CEN/TC
444.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17309:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 17309:2019
CEN/TR 17309:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Outline . 6
5 Brief history . 6
6 Flash point, and sustained combustion and burning . 7
7 The need of flash point tests . 7
8 Selection of flash point method . 7
8.1 First considerations . 7
8.2 Open or closed cup . 8
8.3 Non-equilibrium, equilibrium and rapid equilibrium tests . 8
8.4 Flash point automation . 9
8.5 Correlation between methods . 9
8.6 Valid temperature ranges . 9
9 Testing environment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.