EN 14314:2009/FprA1
(Amendment)Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
This European Standard specifies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 °C to + 120 °C.
The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.
This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.
Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard.
This standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure.
This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en mousse phénolique (PF) - Spécification
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz fenolne pene (PF) - Specifikacija
General Information
- Status
- Not Published
- Technical Committee
- CEN/TC 88 - Thermal insulating materials and products
- Drafting Committee
- CEN/TC 88/WG 10 - Building equipment and industrial installations
- Current Stage
- 5060 - Closure of Vote - Formal Approval
- Start Date
- 10-Oct-2012
- Due Date
- 01-Sep-2013
- Completion Date
- 10-Oct-2012
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 08-Jun-2022
Overview - EN 14314:2009/FprA1 (phenolic foam, PF)
EN 14314:2009/FprA1 is a CEN European Standard that specifies requirements for factory-made phenolic foam (PF) thermal insulation products used on building equipment and industrial installations. It covers products with an operating temperature range of approximately -200 °C to +120 °C manufactured as blocks, faced or unfaced boards, pipe sections, segments and prefabricated ware. The standard defines product characteristics and the procedures for testing, evaluation of conformity, marking and labelling. It does not set required performance levels for specific applications (those are provided in regulations or tender documents) and it does not cover in-situ insulation, insulation of the building structure or system-level performance of assemblies that include PF products.
Key topics and technical requirements
- Scope and product forms: factory-made PF blocks, boards, pipe sections, segments and prefabricated components for HVAC, refrigeration, cryogenics and industrial piping.
- Operating temperature range: approximately -200 °C to +120 °C.
- Thermal conductivity limit: products with declared thermal conductivity greater than 0.050 W/(m·K) at 10 °C are excluded from this standard.
- Material properties & tests: dimensional tolerances and dimensional stability, compression resistance, water absorption, closed cell content and thermal conductivity - including conditioning and sample selection rules for pipe sections.
- Minimum closed cell content: for primary thermal insulation products the corrected closed cell content shall be at least 90%.
- Quality, conformity & labelling: procedures for testing, attestation of conformity and product marking are specified; manufacturers must follow EU regulatory requirements (e.g., Declaration of Performance under Construction Products Regulation No 305/2011 from applicable dates).
- Amendments: the document includes technical updates (tolerances, test references and table renumbering) and cross-references to test methods.
Applications
- Insulation of HVAC plant, chilled and cryogenic piping, refrigeration systems, process lines and other industrial installations where low thermal conductivity and dimensional stability are required.
- Prefabricated insulated components and composite panels that use PF as the insulating core (note: system-level performance must be assessed separately).
- Situations requiring high closed-cell content and consistent factory quality (e.g., long-term moisture resistance and thermal aging).
Who should use this standard
- Manufacturers of factory-made phenolic foam products (product specification, testing, marking, conformity).
- Specifiers and consultants (HVAC, refrigeration, process engineering) selecting insulation materials.
- Procurement teams and tender authors requiring standard-compliant product documentation.
- Testing laboratories and conformity assessors performing the referenced tests and verifications.
Related standards and references
- EN 822, EN 823 - dimensional test methods for boards and panels
- EN 13467 - dimensions for pipe sections and prefabricated ware
- EN ISO 4590 - closed cell content test method
- EU Construction Products Regulation (No 305/2011) - Declaration of Performance and CE/UKCA marking requirements
Keywords: EN 14314, phenolic foam, PF insulation, thermal insulation, pipe sections, factory-made insulation, thermal conductivity, closed cell content, HVAC insulation.
Frequently Asked Questions
EN 14314:2009/FprA1 is a draft published by the European Committee for Standardization (CEN). Its full title is "Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification". This standard covers: This European Standard specifies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 °C to + 120 °C. The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure. This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
This European Standard specifies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 °C to + 120 °C. The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure. This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
EN 14314:2009/FprA1 is classified under the following ICS (International Classification for Standards) categories: 27.020 - Internal combustion engines; 91.100.60 - Thermal and sound insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14314:2009/FprA1 has the following relationships with other standards: It is inter standard links to EN 14314:2009+A1:2013, EN 14314:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14314:2009/FprA1 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/103. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14314:2009/FprA1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2012
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz fenolne pene (PF) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made phenolic foam (PF) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Phenolharzschaum (PF)
- Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Produits manufacturés en mousse phénolique (PF) - Spécification
Ta slovenski standard je istoveten z: EN 14314:2009/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 14314:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2012
ICS 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Factory made phenolic foam (PF) products -
Specification
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die technische Gebäudeausrüstung
et les installations industrielles - Produits manufacturés en
und für betriebstechnische Anlagen in der Industrie -
mousse phénolique (PF) - Spécification Werkmäßig hergestellte Produkte aus Phenolharzschaum
(PF) - Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 88.
This draft amendment A1, if approved, will modify the European Standard EN 14314:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14314:2009/FprA1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modifications to 4.2.2, Dimensions and tolerances .4
2 Modifications to 4.2.3, Dimensional stability .4
3 Modification to 4.2.5.3, Durability of thermal resistance against ageing .5
4 Modifications to 4.3.5, Compression resistance properties .5
5 Modifications to 4.3.7, Water absorption .5
6 Modification to 4.3.8, Closed cell content .5
7 Modification to 5.2, Conditioning .5
8 Modifications to 5.3.1, General .5
9 Modification to 5.3.2, Thermal conductivity .5
10 Modifications to ZA.1, Scope and relevant characteristics .6
11 Modification to ZA.2, Procedures for for attestation of conformity of factory made
phenolic foam products .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...