EN 752-6:1998
(Main)Drain and sewer systems outside buildings - Part 6: Pumping installations
Drain and sewer systems outside buildings - Part 6: Pumping installations
This European Standard is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building. This European Standard sets out principles for planning and design of pumping installations for drain and sewer systems which otherwise operate essentially under gravity.
Entwässerungssysteme außerhalb von Gebäuden - Teil 6: Pumpanlagen
Diese Europäische Norm gilt für Entwässerungssysteme, welche hauptsächlich als Freispiegelsysteme betrieben werden. Sie gilt von dem Punkt an, wo das Abwasser das Gebäude bzw. die Dachentwässerung verläßt oder in einen Straßenablauf fließt, bis zu dem Punkt, wo das Abwasser in eine Behandlungsanlage oder in einen Vorfluter eingeleitet wird. Abwasserleitungen und -kanäle unterhalb von Gebäuden sind hierbei eingeschlossen, solange sie nicht Bestandteil der Gebäudeentwässerung sind.
Réseaux d'évacuation et d'assainissement à l'extérieur des bâtiments - Partie 6: Installations de pompage
La présente norme européenne s'applique aux réseaux d'évacuation et d'assainissement fonctionnant principalement à écoulement libre, du point où l'effluent quitte le bâtiment ou le réseau pluvial, ou pénètre dans un avaloir de chaussée, jusqu'au point où il est déversé dans une station de traitement ou dans un milieu récepteur. Les branchements et collecteurs situés sous les bâtiments sont inclus à condition qu'ils ne fassent pas partie du réseau d'évacuation de ces bâtiments.
Sistemi za odvod odpadne vode in kanalizacijo zunaj zgradb - 6. del: Črpalne postaje
General Information
- Status
- Withdrawn
- Publication Date
- 21-Apr-1998
- Withdrawal Date
- 22-Jan-2008
- Technical Committee
- CEN/TC 165 - Waste water engineering
- Drafting Committee
- CEN/TC 165/WG 22 - Drainage outside buildings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-Jan-2008
- Completion Date
- 23-Jan-2008
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 752-6:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Drain and sewer systems outside buildings - Part 6: Pumping installations". This standard covers: This European Standard is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building. This European Standard sets out principles for planning and design of pumping installations for drain and sewer systems which otherwise operate essentially under gravity.
This European Standard is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building. This European Standard sets out principles for planning and design of pumping installations for drain and sewer systems which otherwise operate essentially under gravity.
EN 752-6:1998 is classified under the following ICS (International Classification for Standards) categories: 13.060.30 - Sewage water; 23.040.05 - Pipeline and its parts for external sewage systems; 23.080 - Pumps; 93.030 - External sewage systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 752-6:1998 has the following relationships with other standards: It is inter standard links to EN 752:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 752-6:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 752-6:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SRVWDMHEntwässerungssysteme außerhalb von Gebäuden - Teil 6: PumpanlagenRéseaux d'évacuation et d'assainissement a l'extérieur des bâtiments - Partie 6: Installations de pompageDrain and sewer systems outside buildings - Part 6: Pumping installations93.030Zunanji sistemi za odpadno vodoExternal sewage systemsICS:Ta slovenski standard je istoveten z:EN 752-6:1998SIST EN 752-6:1998en01-december-1998SIST EN 752-6:1998SLOVENSKI
STANDARD
SIST EN 75
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...