iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13236:2001

(Main)

Safety requirements for superabrasives

Safety requirements for superabrasives

This standard comprises safety requirements for the construction and testing by the manufacturer of all superabrasives (grinding wheels, cutting-off wheels, diamond wire, mounted points and other superabrasives) which are manufactured or repaired after the date of issue of the standard. The Standard does not include dressing tools including rotary truers nor any non-rotating Superabrasive tool.

Sicherheitsanforderungen für Schleifwerkzeuge mit Diamant oder Bornitrid

Diese Norm enthält Sicherheitsanforderungen für Konstruktion und Prüfung für Schleifkörper, Trennschleifscheiben, Sägeseile, Schleifstifte und sonstige Schleifwerkzeuge mit Diamant oder Bornitrid durch den Hersteller, die nach der Veröffentlichung dieser Norm hergestellt oder instandgesetzt werden. Sie enthält keine Sicherheitsanforderungen für rotierende Abrichtwerkzeuge, Handfeilen und andere nicht rotierende Schleifwerkzeuge.

Prescriptions de sécurité pour les produits superabrasifs

La présente norme énonce les prescriptions de sécurité que doivent respecter les constructeurs pour la fabrication et les essais de tous les produits superabrasifs (meules, meules à tronçonner, fils diamantés, meules sur tige et autres outils superabrasifs) fabriqués ou réparés après la date de publication de la norme. La présente norme ne traite pas des outils à dresser, y compris les outils à dresser rotatifs ou tout outil non rotatif superabrasif.

Safety requirements for superabrasives

General Information

Status
Withdrawn
Publication Date
23-Jan-2001
Withdrawal Date
23-Nov-2010
ICS
25.100.70 - Abrasives
Technical Committee
CEN/TC 143 - Machine tools - Safety
Drafting Committee
CEN/TC 143/WG 2 - Stationary grinding machines and abrasive products - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Nov-2010
Completion Date
24-Nov-2010
Directive
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Ref Project
SIST EN 13236:2001 - Safety requirements for superabrasives

Relations

Replaced By
EN 13236:2010 - Safety requirements for superabrasive products
Effective Date
08-Jun-2022
Amended By
EN 13236:2001/A1:2005 - Safety requirements for superabrasives
Effective Date
08-Jun-2022

Buy Standard

EN 13236:2001EN 13236:2001
PreviousNext
Standard
EN 13236:2001
English language
83 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for superabrasivesSicherheitsanforderungen für Schleifwerkzeuge mit Diamant oder BornitridPrescriptions de sécurité pour les produits superabrasifsSafety requirements for superabrasives25.100.70BrusivaAbrasivesICS:Ta slovenski standard je istoveten z:EN 13236:2001SIST EN 13236:2001en01-junij-2001SIST EN 13236:2001SLOVENSKI
STANDARD



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12413:2019(Main)
Safety requirements for bonded abrasive products
SIST EN 12413:2020

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive products.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13236:2019(Main)
Safety requirements for superabrasive products
SIST EN 13236:2019

This document applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This document specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products.
This document contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use, which will be made available to the user by the manufacturer.
This document does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers or any non-rotating superabrasive products.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13743:2017(Main)
Safety requirements for coated abrasive products
SIST EN 13743:2017

This European Standard is applicable to the following coated abrasive products and a combination of coated and non-woven abrasive products: flap wheels, flap discs, vulcanised fibre discs and spindle mounted flap wheels. It also applies to back-up pads for vulcanised fibre discs. These products are manufactured using the following abrasive grains: aluminium oxide, silicon carbide, diamond, or CBN.
This European Standard specifies requirements and/or measures for removal or reduction of hazards resulting from the design and application of the coated abrasive products and clamping devices.
This European Standard also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4 of this standard.
This European Standard does not apply to abrasive products entirely of non-woven web.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6103:2014(Main)
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014)
SIST EN ISO 6103:2015

ISO 6103:2014 specifies the maximum permissible values of unbalances for bonded abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the as-delivered condition. It also specifies the method for measuring the unbalance and the practical method for testing whether a grinding wheel is acceptable or not.
It is applicable to bonded abrasive wheels in the as-delivered condition.
It is not applicable to diamond, cubic boron nitride or natural stone grinding wheels, or to centreless control wheels, lapping and disc wheels, ball wheels or glass grinding wheels.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1083-2:1997(Main)
Power-driven brushes - Part 2: Safety requirements
SIST EN 1083-2:1997

This Part of this European Standard specifies safety requirements for power- driven brushes. Excluded from this standard are power-driven brushes made for a specialized application and designed exclusively for that purpose (such as those given in 3.10 to 3.21 prEN 1083-1).

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1083-1(Main)
Power-driven brushes - Part 1: Definitions and nomenclature
oSIST prEN 1083-1:2023

This document defines terms which are used to describe power-driven brushes and strip brushes and describes the designation system.
This document does not cover brushes for car wash sites, vacuum cleaners, carpet cleaning machines, sewer and street cleaning machines, dental brushes, brushes for sealing and stripping.

  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1083-2(Main)
Power-driven brushes - Part 2: Safety requirements
oSIST prEN 1083-2:2024

This document specifies requirements and measures for removal or reduction of hazards resulting from the design and application of power-driven brushes.
NOTE   Power-driven brushing tools are e.g. cup brushes, wheel brushes, end brushes, disc brushes, tube brushes and head brushes.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to cylinder brushes and strip brushes, brushes for car washing, vacuum cleaners, floor cleaning, drain and street cleaning machines and dental brushes.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12413:2007/FprA1(Amendment)
Safety requirements for bonded abrasive products
SIST EN 12413:2007/kprA1:2010

Amendment:
During revision of EN 12413:1999 an editorial simplification of the table with the scope of inspection (EN 12413:1999, Table 14) had been decided (see meeting report, document CEN/TC 143/WG 2 N 132). However this simplification led to a tightening of the scope of inspection for "all other abrasive products" in EN 12413:2007, Table 7 which was not covered by the compilation of comments table (document CEN/TC 143/WG 2 N 133) and no technical reason can be seen for this tightening of requirements.
Scope of EN 12413:2007:
This standard is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This standard also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4 of this standard.
This standard does not apply to superabrasives and coated abrasive products.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13236:2010/FprA1(Amendment)
Safety requirements for superabrasive products
SIST EN 13236:2011/kFprA1:2015

This European Standard is applicable to the following superabrasive products: precision superabrasive grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This European Standard specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products.
This European Standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4.
This European Standard does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers nor any non-rotating superabrasive products.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12413:2019(Main)
Safety requirements for bonded abrasive products
SIST EN 12413:2020

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive products.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day