iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 932-6:1999

(Main)

Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility

Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility

This European Standard gives definitions of repeatability and reproducibility adapted form ISO 5725-1 to the specific situation of sampling and testing aggregates. These adjustments have been made because test portions or test specimens of aggregates are usually not identical to each other as specified in ISO 5725-1.

Prüfverfahren für allgemeine Eigenschaften von Gesteinskörnungen - Teil 6: Definitionen von Wiederholpräzision und Vergleichpräzision

Diese Europäische Norm definiert Begriffe fu(r Wiederholpra(zision und Vergleichpra(zision, angepaßt von ISO 5725-1 and die spezifische Situation der Probenahme und Prüfung von Gesteinskörnungen. Die Anpassungen wurden durchgefu(hrt, da in Abweichung zur Festlegung in ISO 5725-1 Meßproben oder Einzelmeßproben von Gesteinskörnungen u(blicherweise nicht identisch sind.

Essais pour déterminer les propriétés générales des granulats - Partie 6: Définitions de la répétabilité et de la reproductibilité

La présente norme européenne donne les définitions de la répétabilité et de la reproductibilité, adaptées de l'ISO 5725-1 pour le cas spécifique de l'échantillonnage et des essais de granulats. Cette adaptation a été faite du fait que les prises d'essai et les éprouvettes de granulats ne sont généralement pas identiques ` celles spécifiées dans l'ISO 5725-1.

Preskusi splošnih lastnosti agregatov - 6. del: Definicije ponovljivosti in primerljivosti

General Information

Status
Published
Publication Date
18-May-1999
Withdrawal Date
30-Nov-2003
ICS
01.040.91 - Construction materials and building (Vocabularies)
91.100.15 - Mineral materials and products
Technical Committee
CEN/TC 154 - Aggregates
Drafting Committee
CEN/TC 154/SC 6 - Test methods
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
21-Oct-2020
Ref Project
SIST EN 932-6:1999 - Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility

Relations

Child
EN 932-5:1999 - Tests for general properties of aggregates - Part 5: Common equipment and calibration
Effective Date
22-Dec-2008

Buy Standard

EN 932-6:1999EN 932-6:1999
PreviousNext
Standard
EN 932-6:1999
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi splošnih lastnosti agregatov - 6. del: Definicije ponovljivosti in primerljivostiPrüfverfahren für allgemeine Eigenschaften von Gesteinskörnungen - Teil 6: Definitionen von Wiederholpräzision und VergleichpräzisionEssais pour déterminer les propriétés générales des granulats - Partie 6: Définitions de la répétabilité et de la reproductibilitéTests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility91.100.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12670:2019(Main)
Natural stone - Terminology
SIST EN 12670:2019

This document defines the recommended terminology covering scientific and technical terms, test methods, products, and the classification of Natural Stones. This document does not cover roofing slate, for roofing slate see EN 12326-1 and EN 12326-2.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12440:2017(Main)
Natural stone - Denomination criteria
SIST EN 12440:2018

This European Standard establishes the criteria for the designation of natural stone from raw material to finished products.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14618:2009(Main)
Agglomerated stone - Terminology and classification
SIST EN 14618:2009

This document specifies the terminology and classification of the agglomerated stone products. Agglomerated stone products are industrial products mainly made of hydraulic cement, resin or mixture of both, stones and other additions. They are industrially manufactured in geometrical shapes at fixed plants by moulding techniques. They are put on the market in the form of rough blocks, rough slabs, slabs, tiles, dimensional stone works, and any other cut to size products.
All other agglomerated stones products not intended to be used for flooring, wall finishes and assimilated uses (like drainage channels, structural elements, etc.) are excluded from the field of this standard.
This European Standard is not applicable to terrazzo tiles covered by EN 13748-1 [1] and EN 13748-2 [2].

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15167-1:2006(Main)
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
SIST EN 15167-1:2006

This European Standard specifies requirements for the chemical and physical properties as well as quality control procedures for ground granulated blastfurnace slag for use as a type II addition in the production of concrete, including in particular cast-in-situ or prefabricated structural concrete conforming to EN 206-1. Ground granulated blastfurnace slag conforming to this European Standard may also be used in mortars and grouts.
Ground granulated blastfurnace slag containing any added materials other than grinding aids, is not within the scope of this European Standard. It is also not within the scope of this European Standard to specify provisions governing the practical application of ground granulated blastfurnace slag in the production of concrete, mortar or grout, i.e. requirements concerning composition, mixing, placing, curing etc. As regards such provisions, reference should be made to other European or national standards, such as EN 206-1.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1888-3:2024(Main)
Child care articles - Wheeled child conveyances - Part 3: Pushchairs intended for leisure sport activities
kSIST FprEN 1888-3:2024

This document specifies the safety requirements of pushchairs when used for running/jogging or skating (excluding ice skating), intended for the transport of one or two children up to 15 or 22 kg each.
Pushchairs intended to transport the carer while pushing (e.g. the combination of longboard and stroller) are excluded from the scope of this document.
This document applies in conjunction with and in addition to the European standards EN 1888 1:2018+A1:2022 or EN 1888-2:2018+A1:2022 and it cannot be used separately.
If the product has several functions or can be converted into another function, the relevant European standards apply to it.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15877-1:2024(Main)
Railway applications - Markings of railway vehicles - Part 1: Freight wagons
kSIST FprEN 15877-1:2024

This document specifies the markings on heavy rail freight wagons, or parts of heavy rail freight wagons, relating to their technical, operational and maintenance characteristics. It specifies the characteristics of these markings, the requirements pertaining to their presentation, their shape and position on a rail vehicle and their meaning. Some markings are accompanied with (a) note(s), where appropriate.
Tank manufacturers’ design criteria, test and product specification plates have not been considered in this document as they are specified in EN 12561 1:2011.
Where fully specified in RID [14] dangerous goods markings have not been considered in this document (dimensions, colour, location and form). Where markings are not fully specified in RID they are included in this document.

  • Draft
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2884:2024(Main)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
kSIST FprEN 2884:2024

This document specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated.
Classification: 1 100 MPa /315 °C ·

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12159:2024(Main)
Builders hoists for persons and materials with vertically guided cages
kSISTF prEN 12159:2022

1.1   This document specifies power operated temporarily installed builders’ hoists (referred to as “hoists” in this document) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a cage:
-   designed for the transportation of persons or of persons and materials;
-   guided;
-   travelling vertically or along a path within 15° max. of the vertical;
-   supported or sustained by rack and pinion;
-   designed with and / or without support from separate structure.
1.2   This document specifies the significant hazards, hazardous situations or hazardous events relevant to the machine as listed in Annex C which arise during the various phases in the life of the machine and describes methods for the elimination or reduction of these hazards when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
1.3   This document does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   emission of airborne noise;
-   dual (twin) cage hoists;
-   twin masts hoists;
-   combination hoists, e.g. an EN 12159 hoist with an EN 12158-1 hoist;
-   counterweighted hoists, neither by separate counterweight nor counterweighted by another cage.
1.4   This document does not apply to:
-   builders’ hoists for the transport of goods only EN 12158-1:2021 and EN 12158-2:2000+A1:2010;
-   lifts according to EN 81-20:2020, EN 81-3:2000+A1:2008 and EN 81-43:2009;
-   work cages suspended from lifting appliances;
-   work platforms carried on the forks of fork trucks;
-   work platforms according to EN 1495:1997+A2:2009  ;
-   transport platforms according to EN 16719:2018;
-   funiculars;
-   lifts specially designed for military purposes;
-   mine lifts;
-   theatre elevators;
-   hoists with hydraulic drive/braking systems and hydraulic safety devices.
1.5   This document specifies the hoist installation. It includes the base frame and base enclosure but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties but excludes the design of anchor bolts to the supporting structure. It includes the landing gates and their frames but excludes the design of any anchorage fixing bolts to the supporting structure.
1.6   This document does not apply to builders’ hoists for persons and material with vertically guided cages which are manufactured before the date of publication of this document by CEN.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4013:2024(Main)
Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C
kSIST FprEN 4013 rev:2024

This document specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa /600 °C .

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13991:2024(Main)
Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods
kSIST FprEN 13991:2024

This document specifies the requirements and the test methods for creosotes for industrial wood preservation.
Different grades of creosote are used depending on the desired properties of the treated wood.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document cannot address all of the safety implications associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and assess the applicability of regulatory limitations prior to use. The warnings to use are covered in Annex C.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day