EN 12622:2009+A1:2013
(Main)Safety of machine tools - Hydraulic press brakes
Safety of machine tools - Hydraulic press brakes
This European Standard specifies technical safety requirements and protective measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic press brakes which are designed to work cold metal or material partly of metal and hereafter referred to as machines.
This European Standard also covers hydraulic press brakes, whose primary intended use is the cold working of metal, which are to be used in the same way to work other sheet materials such as cardboard or plastic.
The requirements in this European Standard take account of intended use, including foreseeable misuse as defined in 3.22 of EN ISO 12100-1:2003. This European Standard presumes access to the press brake from all directions, deals with the hazards described in Clause 4, and specifies the safety measures for both the operator and other exposed persons.
This European Standard also applies to:
- ancillary devices which are an integral part of the press brake, e.g. back gauges and adjustable front sheet supports;
- machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machine working separately.
The requirements of this European Standard apply to all hydraulic press brakes whatever the technology used in their control system, e.g. electromechanical and/ or electronic.
This European Standard does not apply to machines whose principal designed purpose is:
a) sheet folding by rotary action;
b) tube and pipe bending by rotary action;
c) roll bending.
This European Standard applies to machines built after the date of issue of this European Standard.
This European Standard does not cover the safety aspect of automatic loading and unloading equipment.
Some guidance how to take into account additional automatic loading and unloading equipment can be found in ISO 11161.
Sicherheit von Werkzeugmaschinen - Hydraulische Gesenkbiegepressen
Diese Europäische Norm legt technische Sicherheitsanforderungen und Schutzmaßnahmen fest, die von Konstrukteuren, Herstellern und Lieferanten von hydraulischen Gesenkbiegepressen für die Kaltbearbeitung von Metall oder teilweise aus Metall bestehendem Werkstoff zu verwenden sind. Die hydraulischen Gesenkbiegepressen werden im Folgenden Maschinen genannt.
Diese Europäische Norm gilt auch für hydraulische Gesenkbiegepressen, deren ursprünglicher Verwendungszweck die Kaltbearbeitung von Metall ist und die in gleicher Weise für die Bearbeitung von anderem Tafelmaterial wie Pappe oder Kunststoff eingesetzt werden sollen.
Die in dieser Europäischen Norm enthaltenen Anforderungen berücksichtigen die bestimmungsgemäße Verwendung und schließen vorhersehbare missbräuchliche Verwendung ein, wie in EN ISO 12100 1:2003, 3.22, definiert. Diese Norm unterstellt Zugang zur Gesenkbiegepresse von allen Seiten, behandelt die in Abschnitt 4 beschriebenen Gefährdungen und legt die Sicherheitsmaßnahmen für den Bediener und andere in der Nähe befindlichen Personen fest.
Diese Europäische Norm gilt ebenfalls für:
Zusatzeinrichtungen, die fester Bestandteil der Gesenkbiegepresse sind, z. B. hintere Anschläge und verstellbare Werkstückauflagen an der Vorderseite.
Wenn Gefährdungen und Risiken vergleichbar mit Einzelmaschinen sind, gilt diese Norm auch für Maschinen, die in eine Fertigungslinie integriert sind.
Die Anforderungen dieser Europäischen Norm gelten für alle hydraulischen Gesenkbiegepressen, unabhängig von der Art wie sie gesteuert werden, z. B. elektromechanisch und/oder elektronisch.
Diese Europäische Norm gilt nicht für Maschinen, deren Hauptzweck in folgendem besteht:
a) Schwenkbiegen von Tafelmaterial;
b) Biegen von Rohren durch Schwenkbewegung;
c) Rundbiegen zwischen Walzen.
Diese Europäische Norm gilt für Maschinen, die nach dem Ausgabetag dieser Norm gebaut wurden.
Diese Europäische Norm deckt keine Sicherheitsaspekte in Bezug auf automatische Zuführung und Entnahme ab.
Eine Hilfestellung für Einrichtungen für automatischen Zuführ- und Entnahmevorrichtungen sind in ISO 11161 zu finden.
Sécurité des machines-outils - Presses plieuses hydrauliques
La présente Norme européenne spécifie les prescriptions techniques de sécurité et les mesures de protection que doivent respecter les personnes chargées de la conception, de la construction et de la fourniture des presses plieuses hydrauliques prévues pour le travail à froid des métaux ou des matériaux partiellement constitués de métal, et appelées ci-après machines.
La présente Norme européenne s'applique également aux presses plieuses hydrauliques pour lesquelles l'utilisation normale première est le travail à froid des métaux et qui sont utilisées de la même manière pour le travail d'autres matériaux en feuilles tels que le carton ou le plastique.
Les prescriptions de la présente Norme européenne tiennent compte de l'utilisation normale y compris les mauvais usages prévisibles tels que définis en 3.22 de l’EN ISO 12100-1:2003. La présente Norme européenne suppose un accès possible à la presse plieuse de tous les côtés, traite des phénomènes dangereux décrits en 4 et spécifie les mesures de sécurité à la fois pour l'opérateur et les autres personnes exposées.
La présente norme est applicable également aux :
— dispositifs auxiliaires faisant partie intégrale de la presse plieuse, par exemple: butées arrières et consoles supports de tôle avant réglables ;
— machines qui sont intégrées dans une chaîne de production automatisée où les phénomènes dangereux existants et les risques potentiels sont comparables à ceux d’une machine travaillant isolément.
Les prescriptions de la présente Norme européenne s’appliquent à toutes les presses plieuses hydrauliques quelle que soit la technologie utilisée pour leur système de commande, électromécanique et/ou électronique.
La présente Norme européenne n'est pas applicable aux machines conçues principalement pour :
a) le pliage de feuille par rotation ;
b) le pliage de tube et tuyau par rotation ;
c) le cintrage.
La présente norme s'applique aux machines fabriquées après la date de publication de la présente Norme européenne.
La présente Norme européenne ne traite pas de la sécurité des équipements de chargement et de déchargement automatique.
Quelques conseils pour tenir compte de l'équipement automatique additionnel de chargement et de déchargement sont donnés dans l'ISO 11161.
Varnost obdelovalnih strojev - Stiskalnice za upogibanje pločevine
Ta evropski standard določa tehnične varnostne zahteve in zaščitne ukrepe, ki jih morajo sprejeti osebe, ki se ukvarjajo s projektiranjem, proizvodnjo in dobavljanjem hidravličnih stiskalnic, zasnovanih za obdelavo hladnih kovin ali materialov, ki so delno iz kovin (v nadaljnjem besedilu: »stroji«). Ta evropski standard zajema tudi hidravlične stiskalnice, katerih osnovni namen je hladno obdelovanje kovin, ki bodo uporabljene na enak način za obdelavo drugih ploščatih materialov, kot je karton ali plastika. Zahteve v tem evropskem standardu upoštevajo predvideno uporabo, vključno s predvidljivo zlorabo, kot je opredeljena v točki 3.22 standarda EN ISO 12100-1:2003. Ta evropski standard predvideva dostop do hidravlične stiskalnice iz vseh smeri, obravnava tveganja, opisana v točki 4, in določa varnostne ukrepe za upravljavca in druge izpostavljene osebe. Ta evropski standard se uporablja tudi za: – pomožne naprave, ki so sestavni del hidravlične stiskalnice npr. zadnji prislon in nastavljivi prednji nosilci; – stroje, ki so vgrajeni v avtomatsko proizvodno linijo, pri katerih so tveganja in nevarnosti primerljivi s stroji, ki delujejo ločeno. Zahteve tega evropskega standarda veljajo za vse hidravlične stiskalnice, ne glede na tehnologije, ki se uporabljajo pri njihovem nadzornem sistemu, npr. elektromehansko in/ali elektronsko. Ta evropski standard se ne uporablja za stroje, katerih osnovna uporaba je: a) zgibanje listov z vrtenjem; b) krivljenje cevi z vrtenjem; c) krivljenje z valji. Ta evropski standard se uporablja za stroje, proizvedene po datumu objave tega evropskega standarda. Ta evropski standard ne zajema varnostnih vprašanj v zvezi z opremo za samodejno polnjenje in praznjenje. Nekaj navodil, kako upoštevati dodatno opremo za polnjenje in praznjenje, je na voljo v standardu ISO 11161.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HSicherheit von Werkzeugmaschinen - Hydraulische GesenkbiegepressenSécurité des machines-outils - Presses plieuses hydrauliquesSafety of machine tools - Hydraulic press brakes25.120.10Kovaški stroji. Stiskalnice. ŠkarjeForging equipment. Presses. ShearsICS:Ta slovenski standard je istoveten z:EN 12622:2009+A1:2013SIST EN 12622:2010+A1:2014en,fr,de01-januar-2014SIST EN 12622:2010+A1:2014SLOVENSKI
STANDARDSIST EN 12622:20101DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12622:2009+A1
October 2013 ICS 25.120.10 Supersedes EN 12622:2009
English Version
Safety of machine tools - Hydraulic press brakes
Sécurité des machines-outils - Presses plieuses hydrauliques
Sicherheit von Werkzeugmaschinen - Hydraulische Gesenkbiegepressen This European Standard was approved by CEN on 17 October 2009 and includes Amendment 1 approved by CEN on 26 August 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12622:2009+A1:2013: E SIST EN 12622:2010+A1:2014
Calculation of minimum safety distances . 51 Annex B (normative)
The overall response time of the press brake stopping performance . 53 Annex C (informative)
Example of redundant and monitored hydraulic control circuits for a down-stroking press brake . 54 Annex D (normative)
Conditions for noise measurement of press brakes . 55 Annex E (informative)
Side safeguarding for manually fed press brakes . 56 Annex F (informative)
Markings . 57 Annex G (normative)
Laser actuated AOPD system tests . 58 Annex H (informative)
Bending speed . 59 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42 . 61 Bibliography . 62
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machine working separately. The requirements of this European Standard apply to all hydraulic press brakes whatever the technology used in their control system, e.g. electromechanical and/ or electronic. This European Standard does not apply to machines whose principal designed purpose is: a) sheet folding by rotary action; b) tube and pipe bending by rotary action; c) roll bending. This European Standard applies to machines built after the date of issue of this European Standard. This European Standard does not cover the safety aspect of automatic loading and unloading equipment. Some guidance how to take into account additional automatic loading and unloading equipment can be found in ISO 11161. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 574:1996, Safety of machinery — Two-hand control devices — Functional aspects — Principles for design EN 614-1, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 894-1, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays EN 894-3, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators SIST EN 12622:2010+A1:2014
EN 999:1998, Safety of machinery — The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1005-1, Safety of machinery — Human physical performance — Part 1: Terms and definitions EN 1005-2, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and components parts of machinery EN 1005-3, Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation EN 1005-4, Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery EN 1037:1995, Safety of machinery — Prevention of unexpected start-up EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection EN 1837, Safety of machinery — Integral lighting of machines EN 50370-1, Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 1: Emission EN 50370-2, Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 2: Immunity EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989). EN 60825-1:2007, Safety of laser products — Part 1: Equipment classification and requirements (IEC 60825-1:2007) EN 60947-5-1:2004, Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices (IEC 60947-5-1:2003) EN 60947-5-3, Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDF)
(IEC 60947-5-3:1999) EN 61310-2, Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking (IEC 61310-2:2007) EN 61496-1:2004, Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests (IEC 61496-1:2004, modified) EN 62061:2005, Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005) EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure —Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) SIST EN 12622:2010+A1:2014
CLC/TS 61496-2:2006, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006) CLC/TS 61496-3, Safety of machinery — Electro-sensitive protective equipment — Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
NOTE 1 The operating cycle includes all operations carried out during this movement. NOTE 2 Normally, the cycle start and stop position is the top dead center. 3.1.5 single cycle operating mode where each operating cycle of the beam has to be positively actuated by the operator 3.1.6 dead centre(s) point at which the tool, during its travel, is either nearest/closest to the die (generally it corresponds to the end of the closing stroke), known as the bottom dead centre, or furthest from the die (generally it corresponds to the end of the opening stroke), known as the top dead centre NOTE On an up stroking press brake, the centres are reversed. 3.1.7 hydraulic press brake machine designed or intended to transmit energy to the moving part of the tools by hydraulic means principally for the purpose of bending between narrow forming tools along straight lines NOTE See Figure 1. SIST EN 12622:2010+A1:2014
Key 1 Press cylinder 6 Backgauge 11 Side safeguard 2 Control panel 7 Hydraulic system 12 Light Curtain 3 Electrical Switch Gear Cabinet 8 Beam 13 Frame 4 Foot pedal 9 Tools
5 Work-piece support 10 Bed
Figure 1 — Example of a down-stroking hydraulic press brake SIST EN 12622:2010+A1:2014
a sensing device; controlling monitoring devices; output devices and all interconnecting wiring. [EN 61496-1:2004, definition 3.5] NOTE For the purposes of this European Standard, ESPE covers AOPD, AOPDDR, laser actuated AOPD. 3.1.17 light curtain active opto-electronic protective device (AOPD) comprising an integrated assembly of one or more emitting element(s) and one or more receiving element(s) forming a detection zone with a detection capability specified by the supplier [CLC/TS 61496-2:2006, definition 3.205] 3.1.18 output signal switching device OSSD component of the electro-sensitive protective device (ESPE) connected to the machine control system which, when the sensing device is actuated during normal operation, responds by going to the OFF-state [EN 61496-1:2004, definition 3.19] 3.1.19 safety-related parts of the control system parts (mechanical, hydraulic, electrical, pneumatic) of a control system whose failure can result in a hazard 3.1.20 single break cycle initiation initiation of the single operating cycle of the beam by actuating the light curtain by an object (e.g. work material, hand) and subsequently withdrawing the object from the detection zone of the curtain 3.1.21 double break cycle initiation initiation of the single operating cycle of the beam by twice in succession disturbing (actuating) the light curtain by an object (e.g. work material, hand) and subsequently withdrawing the object from the detection zone of the curtain 3.1.22 overrun movement (distance) of the beam past a defined stopping point SIST EN 12622:2010+A1:2014
AOPDDR Active Opto-electronic Protective Device responsive to Diffuse Reflection (Scanner) PLC Programmable logic controller PES Programmable electronic system ESPE Electro-sensitive protective equipment OSSD Output signal switching device 4 List of significant hazards This clause contains the significant and other relevant hazards, hazardous situations and events (see EN ISO 14121-1) as far as they are dealt with in this European Standard, identified by risk assessment as significant for the machines as defined in the scope and which require action to eliminate or reduce the risk. This European Standard deals with: significant hazards by defining safety requirements and/ or measures or by reference to relevant type B standards; hazards which are present but not significant e.g. general, minor or secondary hazards by reference to EN ISO 12100-1:2003 and EN ISO 12100-2:2003. These hazards are listed in Table 1 in accordance with EN ISO 14121-1. Particular attention is given to hazards dealing with:
crushing and shearing between moving tools, beam, back gauges, work-piece supports (see Table 1); entanglement on or drawing into moving parts of the machine, guards, motor and drive machinery, mechanical handling device (see Table 1); ejection of machine components of hydraulic system (see Table 1). Main danger zones are:
tools area with moving beam, back gauges, work-piece supports; mechanical handling device; motor and drive machinery.
Hazards, hazardous situations and hazardous events
Situations on hydraulic press breaks EN ISO 12100- Relevant type B standard Relevant clause in this International Standard Part 1: 2003 Part 2: 2003 1 Mechanical hazards
5 A.1 Acceleration, deceleration (kinetic energy)
4.2 4.2.1 4.2.2 4.2.3 4.10 4.2.1 4.2.2 4.3 a) 4.3 b) 4.6 4.10 5.1 5.2 5.3 5.5.2 5.5.4 5.5.5 5.5.6 6.1 6.3 6.4 6.5 ISO 13851 ISO 13854 ISO 13855 ISO 13856-2 ISO 13856-3 EN ISO 13857 ISO 14118 ISO 14119 ISO 14120 EN ISO 14122-1 EN ISO 14122-2 EN ISO 14122-3 EN ISO 14122-4 ISO 16156 EN 60204-1 EN 614-1 5.1.1 5.2.6.4 5.2.5.11 5.4.1 5.4.2 5.4.3 5.4.5 5.4.7 5.5.4 5.5.5 5.5.6 5.5.8 A.1 Approach of a moving element to a fixed part
A.1 Cutting parts, sharp edges: crushing and shearing
A.1 Elastic elements High pressure: fluid injection or ejection Vacuum, Gravity (stored energy) Dissipation of accumulated energy inside the machine
A.1 Falling of objects Falling of work-piece A.1 Moving elements: Entanglement
A.1 Rotating elements: Entanglement
A.1 Rough, slippery surface: slipping, tripping and falling of persons (related to machinery) Ejection or spillage of hydraulic fluid. Fall of persons during access to/or at/from the work position machines during setting and operation mode. A.1 Stability Height from the ground Loss of stability A.3 Assembly and installation Error of fitting During tool workpiece clamping change
5.3. a) 6.1.2 6.5.1
5.2.6.2 5.5.3 7 A.3 Operation Restarting the machine after stopping/interruption 5.3 b) 2) 4.11.4 4.11.5 ISO 14118 EN 60204-1 EN 982 EN 983 A.3 Fault finding and troubleshooting Isolation and energy dissipation
4.2.2 4.10 ISO 4413 ISO 4414 ISO 14118 EN 60204-1 2 Electrical hazards A.1 Live parts (direct contact) At electrical equipment during maintenance. 4.3 4.9 5.2 5.3.2 5.5.4 6.4 6.5 EN 60204-1 5.2.3 5.4.2 5.5.2 5.5.9 A.1 Parts which have become live under fault conditions (indirect contact) At electrical equipment during setting, machining and maintenance. A.1 Short-circuit, break up during operation At any mode of operation, in case of penetration of conducting substances. SIST EN 12622:2010+A1:2014
Hazards, hazardous situations and hazardous events
Situations on hydraulic press breaks EN ISO 12100- Relevant type B standard Relevant clause in this International Standard Part 1: 2003 Part 2: 2003 A.4 Failure of control system
– dropping or ejection of
moving parts of the
machine or of a work-
piece clamped by the
machine – failure to stop moving
parts – uncontrolled movements
(including speed
change)
– unintended/unexpected
start up – other hazardous events
due to failure(s) or poor
design of the control
system – variation of speed of
tools (during setting) 5.3 b) 2) 4.2 4.3 4.5 4.11 to 4.13 5.5.2 to 5.5.4 6.3 to 6.5 ISO 4413 ISO 4414 EN 954-1 EN ISO 13849-1 EN ISO 13849-2 ISO 14118 EN 982 EN 983 EN 60204-1 EN 62061 5.2.7 3 Thermal hazards A.1 Objects or materials with a high temperature At hot tools, machine parts and workpiece. 4.4
EN 13487 EN ISO 13732-1 5.5.5 4 Noise hazards A.1 Operating process At any mode of operation or in maintenance situation
4.5 4.2.2 ISO 8525 ISO 230-5 EN ISO 11688-1 5.5.1 6 Radiation hazards A.1 Low frequency electromagnetic radiation Radio frequency electromagnetic radiation At any mode of operation or in maintenance situation 4.7 4.2.2 4.3 c) 5.3.2.1 5.4.5 6.5.1 c)
5.1.1 5.2 5.3.3.1.2 5.5.2 5.5.7 A.1 Optical radiation (infrared, visible and ultraviolet), including laser
At any mode of operation or in maintenance situation EN 60825-1 8 Ergonomic hazards A.1 Design or location of indicators and visual displays units At operators position 4.9 4.2.1 4.7, 4.8 4.11.8 5.2.1 5.3.2.1 EN 547-1 EN 547-2 EN 894-1 EN 849-2 EN 849-3 5.5.3 7 A.1 Design, location or identification of control devices At operators position A.1 Posture, Effort
At control devices and during handling of workpiece tools and machine parts. EN 894-1 EN 849-2 EN 849-3 EN 1005-1 EN 1005-2 EN 1005-3 A.1 Repetitive activity Inadequate consideration of hand arm or foot-leg anatomy at workpiece or tool exchange. EN 614-1 EN 614-2 EN 894-1 EN 849-2 EN 849-3 EN 1005-1 EN 1005-2 EN 1005-3 SIST EN 12622:2010+A1:2014
Hazards, hazardous situations and hazardous events
Situations on hydraulic press breaks EN ISO 12100- Relevant type B standard Relevant clause in this International Standard A.1 Visibility, Local lighting At any mode of operation or in maintenance situation
EN 1837
9 Hazards associated with environment in which the machine is used A.1 Electromagnetic disturbances
At NC control equipment during all modes of operation and maintenance 5.3 b) 2) 4.12.1 6.5.1 b)
5.2 5.5.2 A.4 Human errors human behaviour
Workstation and/or work process design. Inadequate consideration of hand- arm or foot-leg anatomy 4.9 4.2.1 4.7 4.8
4.11 5.5 6.3 to 6.6 EN 894-1 EN 849-2 EN 849-3 5.2.2 5.2.5.11 5.3.11 5 Safety requirements and/or measures 5.1 Protection of mechanical hazards
5.1.1 Description of the safeguarding of access to moving parts 5.1.1.1 General The major danger zones at hydraulic press brakes are the tools, associated area and ancillary loading and unloading devices which are an integral part of the machine. Preventive measures shall be taken to deal with the relevant hazards. Safeguarding measures described in EN ISO 12100-1 and EN ISO 12100-2 which are appropriate for the protection of any operator at the tools are listed below. Designers, manufacturers and suppliers shall select the safeguarding methods which reduce the risks as far as possible, considering the significant hazards (see Table 1) and the mode of production. The selected combination of safeguarding methods shall protect all exposed persons, i.e. those who can gain access to the danger zone during operation, setting, maintenance, cleaning and inspection activities. Access to the danger zone(s) shall be prevented by one or a combination of the following safeguarding measures. 5.1.1.2 Fixed enclosing guards Fixed enclosing guards shall comply with EN 953. They shall be firmly secured to the machine, another rigid structure or the floor. Any openings in the guards or between the guard and the machine shall meet the requirements of EN ISO 13857:2008, Table 4. 5.1.1.3 Interlocking guards with or without guard locking Interlocking guards shall comply with EN 953 and prevent, in conjunction with fixed guards, access to the danger zone, during any dangerous movement. Initiation of the dangerous movement shall be prevented until the guard is closed. The associated interlocking devices shall be designed and constructed in accordance with 6.2.1 of EN 1088:1995, for occasional access and with 6.2.2 of EN 1088:1995, for frequent access
Interlocking guards without guard locking shall be placed in such a position that the operator does not have time to reach the danger zone before any dangerous movement has ceased (see EN 999 and EN ISO 13857).
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...