EN 15316-4-5:2017
(Main)Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
This European Standard defines the determination of energy indicators of district energy systems. District energy systems may be district heating, district cooling or other district energy carriers.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000 1.
NOTE 1 In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB more than one module and one module may be covered by more than one EPB standard, for instance a standard may cover a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
(Table 1 - Position of EN 15316-4-5 within the modular structure)
....
Energetische Bewertung von Gebäuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-5: Fernwärme und Fernkälte, Modul M3-8-5, M4-8-5, M8-8-5, M11-8-5
Diese Europäische Norm legt die Bestimmung von Energiekennzahlen von Fernenergiesystemen fest. Fernenergiesysteme können Fernwärme, Fernkälte oder andere Fernenergieträger sein.
Tabelle 1 zeigt die relative Position dieser Norm innerhalb des EPB-Normenpakets im Kontext der in EN ISO 52000-1 dargelegten modularen Struktur.
ANMERKUNG In CEN ISO/TR 52000-2 findet sich die gleiche Tabelle mit den Nummern (für jedes Modul) der jeweiligen EPB-Normen und den dazugehörigen technischen Berichten, die bereits veröffentlicht wurden oder sich in der Erstellung befinden.
ANMERKUNG 2 Die Module repräsentieren EPB-Normen, auch wenn eine EPB-Norm mehr als ein Modul und ein Modul von mehr als einer EPB-Norm abgedeckt werden darf, zum Beispiel darf eine Norm jeweils ein vereinfachtes und ein detailliertes Verfahren abdecken. Siehe auch Abschnitt 2 und Tabellen A.1 und B.1.
Tabelle 1 — Position von EN 15316-4-5 innerhalb der modularen Struktur
Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 4-5 : Réseaux de chaleur et de froid, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
La présente Norme européenne définit la détermination des indicateurs énergétiques des réseaux de distribution d’énergie. Les réseaux de distribution d’énergie peuvent être des réseaux de chaleur, des réseaux de froid ou d’autres réseaux de vecteurs énergétiques.
Le Tableau 1 indique la position relative de la présente norme dans l’ensemble de normes PEB dans le cadre de la structure modulaire décrite dans l’EN ISO 52000 1.
NOTE 1 Le CEN ISO/TR 52000 2 fournit le même tableau avec, pour chaque module, le numéro des normes PEB pertinentes et les rapports techniques associés qui sont publiés ou en cours d’élaboration.
NOTE 2 Les modules représentent les normes PEB, bien qu’une seule norme PEB puisse couvrir plusieurs modules et qu’un seul module puisse être couvert par plusieurs normes PEB, par exemple une méthode simplifiée et une méthode détaillée respectivement. Voir également l’Article 2 et les Tableaux A.1 et B.1.
Energijske lastnosti stavb - Metoda za izračun energijskih zahtev in učinkovitosti sistema - 4-5. del: Sistemi za daljinsko ogrevanje in hlajenje - Moduli M3-8-5, M4-8-5, M8-8-5 in M11-8-5
Ta standard določa ugotavljanje energijskih kazalnikov daljinskih energijskih sistemov. Daljinski energijski sistemi so lahko daljinsko ogrevanje, daljinsko hlajenje ali drugi nosilci daljinske energije.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Energetische Bewertung von Gebäuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-5: Fernwärme und Fernkälte, Modul M3-8-5, M4-8-5, M8-8-5, M11-8-5Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 4-5 : Réseaux de chaleur et de froid, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-591.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 15316-4-5:2017SIST EN 15316-4-5:2018en,fr,de01-maj-2018SIST EN 15316-4-5:2018SLOVENSKI
STANDARDSIST EN 15316-4-5:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15316-4-5
May
t r s y ICS
{ sä s v rä s râ
{ sä s v rä u r Supersedes EN
s w u s xæ væ wã t r r yEnglish Version
Energy performance of buildings æ Method for calculation of system energy requirements and system efficiencies æ Part
væ wã District heating and coolingá Module M uæ zæ wá M væ zæ wá M zæ zæ wá M s sæ zæ w Performance énergétique des bâtiments æ Méthode de calcul des besoins énergétiques et des rendements des systèmes æ Partie
væ w ã Réseaux de chaleur et de froidá Module M uæ zæ wá M væ zæ wá M zæ zæ wá M s sæ zæ w
Heizungsanlagen und Wasserbasierte Kühlanlagen in Gebäuden æ Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen æ Teil
væ wã Fernwärme und Fernkälte This European Standard was approved by CEN on
t y February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w u s xæ væ wã t r s y ESIST EN 15316-4-5:2018
Template for choices, input data and references . 21 A.1 General . 21 A.2 References . 21 A.3 Default values for energy carriers . 22 A.4 Distribution systems . 22 A.5 Reference values . 23 A.6 Method selection . 23 Annex B (informative)
Default choices, input data and references . 24 B.1 General . 24 B.2 References . 24 B.3 Default values for energy carriers . 25 B.4 Distribution systems . 26 B.5 Reference values . 27 B.6 Default method selection . 28 Bibliography . 29
— the individual user will apply the standard to assess the energy performance of a building, and thereby use the choices made by the regulators. Topics addressed in this standard can be subject to public regulation. Public regulation on the same topics can override the default values in Annex B of this standard. Public regulation on the same topics can even, for certain applications, override the use of this standard. Legal requirements and choices are in general not published in standards but in legal documents. In order to avoid double publications and difficult updating of double documents, a national annex may refer to the legal texts where national choices have been made by public authorities. Different national annexes or national data sheets are possible, for different applications. It is expected, if the default values, choices and references to other EPB standards in Annex B are not followed due to national regulations, policy or traditions, that: — national or regional authorities prepare data sheets containing the choices and national or regional values, according to the model in Annex A. In this case the national annex (e.g. NA) refers to this text; — or, by default, the national standards body will consider the possibility to add or include a national annex in agreement with the template of Annex A, in accordance to the legal documents that give national or regional values and choices. Further target groups are parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. More information is provided in the Technical Report accompanying this standard (CEN/TR 15316-6-8). EPB set of standards deal with energy performance calculation and other related aspects (like system sizing) to provide the building services considered in the EPBD. The subjects covered by CEN/TC 228 are the following: — design of heating systems (water based, electrical, etc.); SIST EN 15316-4-5:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.