EN 12015:1998
(Main)Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission
This European Standard specifies the emission limits and test conditions for lifts, escalators and passenger conveyors, which are permanently installed in buildings and for which CEN/TC 10 has direct responsibility for the production of European Standards, in relation to electromagnetic interference. These limits however, may not provide full protection against disturbances caused to radio and TV reception when such equipment is used within distances given in table1. Since lifts travel large vertical distances in buildings, it becomes impracticable to test the installation either in a test laboratory or in situ (where the uncontrolled environment can also influence the test procedures and results). Likewise, due to practical restrictions imposed by the lift car internal dimensions, it is impracticable to test the lift car from within. Similar considerations regarding dimensions apply equally to the testing of escalators and passenger conveyors. Therefore this standard applies to the sub-systems and/or apparatus of lifts, escalators and passenger conveyors, an assembly of which will comprise an installation, the boundaries of which are indicated by example in figures 2 and 3. However, this standard does not apply to lighting apparatus and other services already proven to be in conformity to the EMC Directive. Equipment covered by this standard can also fall into the scope of EN 61000-3-2, EN 61000-3-3, IEC 1000-3-4 and IEC 1000-3-5 as appropriate.
Elektromagnetische Verträglichkeit - Produktfamilien-Norm für Aufzüge, Fahrtreppen und Fahrsteige - Störaussendung
Diese Europäische Norm legt Grenzwerte und Prüfverfahren für Aufzüge, Fahrtreppen und Fahrsteige , die dauerhaft in Gebäuden installiert sind und für die das CEN/TC 10 direkt für die Erstellung von Europäischen Normen verantwortlich ist, in Bezug auf die elektromagnetische Störaussendung fest. Diese Grenzwerte könnten jedoch keinen umfassenden Schutz gegen Störungen des Radio- und Fernsehempfangs bieten, wenn diese Einrichtungen in einem geringeren Abstand, als in Tabelle 1 angegeben, betrieben werden.
Compatibilité électromagnétique - Norme famille de produits pour ascenseurs, escaliers mécaniques et trottoirs roulants - Emission
La présente norme européenne spécifie les limites d'émission et les conditions d'essai relatives aux interférences électromagnétiques pour les ascenseurs, escaliers mécaniques et trottoirs roulants qui sont installés de façon permanente dans des bâtiments et pour lesquels le CEN/TC10 a la responsabilité directe de l'établissement de normes européennes. Ces limites, cependant, pourraient ne pas assurer une protection totale contre les perturbations causées aux récepteurs de radio et de télévision lorsque de tels appareils sont utilisés en deçà des limites de distances dans le tableau 1.
Elektromagnetna združljivost - Standard skupine izdelkov za dvigala, tekoče stopnice in trakove - Oddajanje motenj
General Information
- Status
- Withdrawn
- Publication Date
- 19-May-1998
- Withdrawal Date
- 07-Dec-2004
- Technical Committee
- CEN/TC 10 - Passenger, goods and service lifts
- Drafting Committee
- CEN/TC 10/WG 4 - Data logging and remote control
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Dec-2004
- Completion Date
- 08-Dec-2004
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
TL 9000 QuEST Forum
Telecommunications quality management system.
Sponsored listings
Frequently Asked Questions
EN 12015:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission". This standard covers: This European Standard specifies the emission limits and test conditions for lifts, escalators and passenger conveyors, which are permanently installed in buildings and for which CEN/TC 10 has direct responsibility for the production of European Standards, in relation to electromagnetic interference. These limits however, may not provide full protection against disturbances caused to radio and TV reception when such equipment is used within distances given in table1. Since lifts travel large vertical distances in buildings, it becomes impracticable to test the installation either in a test laboratory or in situ (where the uncontrolled environment can also influence the test procedures and results). Likewise, due to practical restrictions imposed by the lift car internal dimensions, it is impracticable to test the lift car from within. Similar considerations regarding dimensions apply equally to the testing of escalators and passenger conveyors. Therefore this standard applies to the sub-systems and/or apparatus of lifts, escalators and passenger conveyors, an assembly of which will comprise an installation, the boundaries of which are indicated by example in figures 2 and 3. However, this standard does not apply to lighting apparatus and other services already proven to be in conformity to the EMC Directive. Equipment covered by this standard can also fall into the scope of EN 61000-3-2, EN 61000-3-3, IEC 1000-3-4 and IEC 1000-3-5 as appropriate.
This European Standard specifies the emission limits and test conditions for lifts, escalators and passenger conveyors, which are permanently installed in buildings and for which CEN/TC 10 has direct responsibility for the production of European Standards, in relation to electromagnetic interference. These limits however, may not provide full protection against disturbances caused to radio and TV reception when such equipment is used within distances given in table1. Since lifts travel large vertical distances in buildings, it becomes impracticable to test the installation either in a test laboratory or in situ (where the uncontrolled environment can also influence the test procedures and results). Likewise, due to practical restrictions imposed by the lift car internal dimensions, it is impracticable to test the lift car from within. Similar considerations regarding dimensions apply equally to the testing of escalators and passenger conveyors. Therefore this standard applies to the sub-systems and/or apparatus of lifts, escalators and passenger conveyors, an assembly of which will comprise an installation, the boundaries of which are indicated by example in figures 2 and 3. However, this standard does not apply to lighting apparatus and other services already proven to be in conformity to the EMC Directive. Equipment covered by this standard can also fall into the scope of EN 61000-3-2, EN 61000-3-3, IEC 1000-3-4 and IEC 1000-3-5 as appropriate.
EN 12015:1998 is classified under the following ICS (International Classification for Standards) categories: 33.100 - Electromagnetic compatibility (EMC); 91.140.90 - Lifts. Escalators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12015:1998 has the following relationships with other standards: It is inter standard links to EN 12015:2004, EN 81-2:1998+A3:2009, EN 81-1:1998+A3:2009; is excused to EN 12016:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12015:1998 is associated with the following European legislation: EU Directives/Regulations: 2004/108/EC, 2004/108/EU, 89/336/EEC; Standardization Mandates: M/404. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12015:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetische Verträglichkeit - Produktfamilien-Norm für Aufzüge, Fahrtreppen und Fahrsteige - StöraussendungCompatibilité électromagnétique - Norme famille de produits pour ascenseurs, escaliers mécaniques et trottoirs roulants - EmissionElectromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission91.140.90Lifts. Esc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...