iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 19443:2022/A1:2024

(Amendment)

Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) - Amendment 1: Climate action changes (ISO 19443:2018/Amd 1:2024)

Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) - Amendment 1: Climate action changes (ISO 19443:2018/Amd 1:2024)

Qualitätsmanagementsysteme - Spezifische Anforderungen für die Anwendung von ISO 9001:2015 für die Organisationen in der Lieferkette auf dem Sektor der Kernenergie, die für die nukleare Sicherheit wichtige Produkte und Dienstleistungen (ITNS) liefern - Änderung 1: Ergänzungen zu klimabezogenen Maßnahmen (ISO 19443:2018/Amd 1:2024)

Systèmes de management de la qualité - Exigences spécifiques pour l'application de l'ISO 9001:2015 par les organisations de la chaîne d'approvisionnement du secteur de l'énergie nucléaire fournissant des produits ou services importants pour la sûreté nucléaire (IPSN) - Amendement 1: Actions relatives aux changements climatiques (ISO 19443:2018/Amd 1:2024)

Sistemi vodenja kakovosti - Posebne zahteve za uporabo standarda ISO 9001:2015 v dobavni verigi organizacij sektorja jedrske energije, ki dobavlja izdelke in storitve, pomembne za jedrsko varnost (ITNS) - Dopolnilo A1: Spremembe podnebnih ukrepov (ISO 19443:2018/Amd 1:2024)

General Information

Status
Published
Publication Date
10-Sep-2024
ICS
03.120.10 - Quality management and quality assurance
27.120.01 - Nuclear energy in general
Technical Committee
CEN/TC 430 - Nuclear energy, nuclear technologies, and radiological protection
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Sep-2024
Completion Date
11-Sep-2024
Ref Project
SIST EN ISO 19443:2022/A1:2024 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) - Amendment 1: Climate action changes (ISO 19443:2018/Amd 1:2024)

Relations

Amends
EN ISO 19443:2022 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018)
Effective Date
22-Nov-2023

Buy Standard

EN ISO 19443:2022/A1:2024EN ISO 19443:2022/A1:2024
PreviousNext
Amendment
EN ISO 19443:2022/A1:2024
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2024
Sistemi vodenja kakovosti - Posebne zahteve za uporabo standarda ISO 9001:2015
v dobavni verigi organizacij sektorja jedrske energije, ki dobavlja izdelke in
storitve, pomembne za jedrsko varnost (ITNS) - Dopolnilo A1: Spremembe
podnebnih ukrepov (ISO 19443:2018/Amd 1:2024)
Quality management systems - Specific requirements for the application of ISO
9001:2015 by organizations in the supply chain of the nuclear energy sector supplying
products and services important to nuclear safety (ITNS) - Amendment 1: Climate action
changes (ISO 19443:2018/Amd 1:2024)
Qualitätsmanagementsysteme - Spezifische Anforderungen für die Anwendung von ISO
9001:2015 für die Organisationen in der Lieferkette auf dem Sektor der Kernenergie, die
für die nukleare Sicherheit wichtige Produkte und Dienstleistungen (ITNS) liefern -
Änderung 1: Ergänzungen zu klimabezogenen Maßnahmen (ISO 19443:2018/Amd
1:2024)
Systèmes de management de la qualité - Exigences spécifiques pour l'application de
l'ISO 9001:2015 par les organisations de la chaîne d'approvisionnement du secteur de
l'énergie nucléaire fournissant des produits ou services importants pour la sûreté
nucléaire (IPSN) - Amendement 1: Actions relatives aux changements climatiques (ISO
19443:2018/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 19443:2022/A1:2024
ICS:
03.100.70 Sistemi vodenja Management systems
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
27.120.01 Jedrska energija na splošno Nuclear energy in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19443:2022/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 03.120.10; 27.120.01
English Version
Quality management systems - Specific requirements for
the application of ISO 9001:2015 by organizations in the
supply chain of the nuclear energy sector supplying
products and services important to nuclear safety (ITNS) -
Amendment 1: Climate action changes (ISO
19443:2018/Amd 1:2024)
Systèmes de management de la qualité - Exigences Qualitätsmanagementsysteme - Spezifische
spécifiques pour l'application de l'ISO 9001:2015 par Anforderungen für die Anwendung von ISO 9001:2015
les organisations de la chaîne d'approvisionnement du für die Organisationen in der Lieferkette auf dem
secteur de l'énergie nucléaire fournissant des produits Sektor der Kernenergie, die für die nukleare Sicherheit
ou services importants pour la sûreté nucléaire (IPSN) wichtige Produkte und Dienstleistungen (ITNS) liefern
- Amendement 1: Actions relatives aux changements - Änderung 1: Ergänzungen zu klimabezogenen
climatiques (ISO 19443:2018/Amd 1:2024) Maßnahmen (ISO 19443:2018/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 19443:2022; it was approved by CEN on 2 September 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19443:2022/A1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 19443:2018/Amd 1:2024 has been prepared by Technical Committee ISO/TC 85
"Nuclear energy, nuclear technologies, and radiological protection” of the International Organization for
Standardization (ISO) and has been taken over as EN ISO 19443:2022/A1:2024 by Technical Committee
CEN/TC 430 “Nuclear energy, nuclear technologies, and radiological protection” the secretariat of
which is held by AFNOR.
This Amendment to the European Standard EN ISO 19443:2022 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2025, and
conflicting national standards shall be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this docum
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN ISO/TR 4450:2022(Main)
Quality management systems - Guidance for the application of ISO 19443:2018 (ISO/TR 4450:2020)
SIST-TP CEN ISO/TR 4450:2023

This document provides guidance on the implementation of the ISO 19443 requirements, with examples of possible steps an organization can take to meet the requirements.
It does not add to, subtract from, or in any way modify those requirements.
This document does not prescribe mandatory approaches to implementation, or provide any preferred method of interpretation.

  • Technical report
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19443:2022(Main)
Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018)
SIST EN ISO 19443:2022

This International Standard specifies requirements for a quality management system when an organization:
a)    needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b)    aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE 1    In this International Standard, the terms "product" or "service" only apply to products and services intended for, or required by, a customer.
NOTE 2    Statutory and regulatory requirements can be expressed as legal requirements.
This International Standard applies to organizations supplying ITNS products or services.
Application of this standard to organizations performing activities on a licensed nuclear site is subject to prior agreement by the Licensee.
Requirements specified in this International Standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 4450:2022(Main)
Quality management systems - Guidance for the application of ISO 19443:2018 (ISO/TR 4450:2020)
SIST-TP CEN ISO/TR 4450:2023

This document provides guidance on the implementation of the ISO 19443 requirements, with examples of possible steps an organization can take to meet the requirements.
It does not add to, subtract from, or in any way modify those requirements.
This document does not prescribe mandatory approaches to implementation, or provide any preferred method of interpretation.

  • Technical report
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19443:2022(Main)
Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018)
SIST EN ISO 19443:2022

This International Standard specifies requirements for a quality management system when an organization:
a)    needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b)    aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE 1    In this International Standard, the terms "product" or "service" only apply to products and services intended for, or required by, a customer.
NOTE 2    Statutory and regulatory requirements can be expressed as legal requirements.
This International Standard applies to organizations supplying ITNS products or services.
Application of this standard to organizations performing activities on a licensed nuclear site is subject to prior agreement by the Licensee.
Requirements specified in this International Standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2411:2024(Main)
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2023)
kSIST FprEN ISO 2411:2024

This document specifies a method of determining the coating adhesion strength of coated fabrics.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15338:2024(Main)
Hardware for furniture - Strength and durability of extension elements and their components
kSIST FprEN 15338:2024

This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results are only used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested.
Ageing and influences of heat and humidity are not included.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15085:2024(Main)
Small craft - Protection from falling overboard and means of reboarding (ISO 15085:2024)
kSIST FprEN ISO 15085:2024

This document specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of persons falling overboard, and requirements to facilitate reboarding from the water, unaided, on small craft.
This document is applicable to the risk of falling overboard and does not apply to falling within the limits of the deck zone.
This document includes the use of toe straps for hiking out on small sailing boats, but it does not apply to the use of trapezes or similar devices that are designed to allow crew to operate sailing boats with their bodies entirely outside the periphery of the craft.
This document does not apply to the following small craft types:
—     canoes, kayaks;
—     personal watercraft including powered surfboards.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2884-1:2024(Main)
Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO 2884-1:2024)
kSIST FprEN ISO 2884-1:2024

This document specifies the general procedure to be followed in determining the dynamic viscosity of unpigmented coating materials, such as paints, varnishes and related products, as well as binders at a shear rate range between 9 000 s−1 and 12 000 s−1. It describes an absolute viscosity measurement with cone-plate measuring geometry at high shear rates.
The measured value gives information about the resistance offered by the material to brushing, spraying and roller coating during application.
The method specified in this document is suitable for all paints and varnishes whether they are Newtonian in behaviour or not. For materials containing dispersions of large particles, the measuring geometry is expected to be adapted.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 603-2:2024(Main)
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
kSIST FprEN 603-2:2024

This document, part of EN 603 series of standards, specifies the mechanical properties of wrought forging stock in aluminium and aluminium alloys for general engineering applications.
The chemical composition and temper designations for these alloys are specified in EN 573 3 and EN 515 respectively.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24096-1:2024(Main)
Technical product documentation (TPD) - Classification of requirements - Part 1: Framework (ISO 24096‑1:2024)
kSIST FprEN ISO 24096-1:2024

This document specifies a framework for building systems for the classification of requirements. Such systems can be used to indicate requirements of special importance, and communicate them for production set-up, verification, audit, etc.
This document:
—     gives background information why such systems are useful in many areas of manufacturing;
—     can be referred to for the concept of classification of requirements;
—     functions as a framework for applying such systems in technical product documentation (TPD);
—     indicates the needed elements for a classification system;
—     supports with aspects in the choice of symbols for a classification system.
As a framework, this document does not give the details of a specific classification system. Instead, it functions as a basis for an organization-specific system which contains details such as notations and symbols, classification levels, assessment procedures, etc., including usage and interpretation in the TPD.
This document does not specify the contractual consequences of a classification (e.g. needed actions such as choice of tools, reliability index or process capability for a classification level) nor other references to standards or documents for handling classifications and nonconformity to requirements.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day