Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)

ISO 28017:2018 specifies requirements for two types, seven classes and three grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand, coral and small stones with a specific gravity in the range from 1,0 to 2,3 at ambient temperatures ranging from −10 °C to +40 °C.
ISO 28017:2018 covers two types of hose, as follows:
-      type 1: floating type, for delivery only, which includes flotation material to give the hose buoyancy;
-      type 2: submarine type for delivery and suction.
ISO 28017:2018 does not specify requirements concerning the service life of hoses or hose assemblies. Specifying such requirements is the responsibility of the customer, in consultation with the hose manufacturer.

Gummischläuche und Schlauchleitungen, Draht- oder Textilverstärkt für Nassbaggeranwendungen - Anforderung (ISO 28017:2018)

Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des applications de dragage - Spécifications (ISO 28017:2018)

ISO 28017:2018 spécifie les exigences pour deux types, sept classes et trois qualités de tuyaux de dragage à armature métallique ou textile, de dimensions nominales allant de 100 à 1 200. Dans chaque classe, toutes les qualités et dimensions ont la même pression maximale de service. Ces tuyaux sont adaptés pour le refoulement ou l'aspiration d'eau de mer ou d'eau douce mélangée à du limon, du sable, des coraux et de petites pierres ayant une densité relative de 1,0 à 2,3 à des températures ambiantes comprises entre −10 °C et +40 °C.
ISO 28017:2018 traite les deux types de tuyaux suivants:
-      type 1: type flottant, pour le refoulement uniquement, incluant un matériau de flottaison permettant au tuyau de flotter;
-      type 2: type sous-marin, pour le refoulement ou l'aspiration.
ISO 28017:2018 ne spécifie pas d'exigences concernant la durée de vie des tuyaux ou des flexibles. La spécification de ce type d'exigences relève de la responsabilité du client, en concertation avec le fabricant de tuyaux.

Gumene cevi in cevni priključki, ojačeni z žicami ali tekstilom, za uporabo v vodnem bagru - Specifikacija (ISO 28017:2018)

Ta dokument določa zahteve za dve vrsti, sedem razredov in tri stopnje s tekstilom ojačenih cevi za črpanje vode z nazivno velikostjo od 100 do 1200. Znotraj vsakega razreda imajo vsi tipi in velikosti enak najvišji delovni tlak. Take cevi so primerne za dostavo ali sesanje morske ali sladke vode, pomešane z ilovico, peskom, koralami in kamenčki s specifično težnostjo med 1,0 in 2,3 pri temperaturi okolja od −10 °C do +40 °C.
Ta dokument zajema dva tipa cevi, kot sledi:
– tip 1: lebdeči tip, namenjen le dostavi, ki vključuje plavajoč material, zaradi katerega cev ne potone;
– tip 2: podvodni tip za dostavo in sesanje.
Ta dokument ne določa zahtev v zvezi z življenjsko dobo cevi ali sestavo cevi.
Te zahteve mora določiti stranka ob posvetovanju s proizvajalcem cevi.

General Information

Status
Published
Publication Date
27-Feb-2018
Withdrawal Date
30-Aug-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
28-Feb-2018
Completion Date
28-Feb-2018

Relations

Buy Standard

Standard
EN ISO 28017:2018
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 28017:2017
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28017:2018
01-maj-2018
1DGRPHãþD
SIST EN ISO 28017:2012
SIST EN ISO 28017:2012/A1:2015
*XPHQHFHYLLQFHYQLSULNOMXþNLRMDþHQL]åLFDPLDOLWHNVWLORP]DXSRUDERY
YRGQHPEDJUX6SHFLILNDFLMD ,62
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications -
Specification (ISO 28017:2018)
Gummischläuche und Schlauchleitungen, Draht- oder Textilverstärkt für
Nassbaggeranwendungen - Anforderung (ISO 28017:2018)
Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des
applications de dragage - Spécifications (ISO 28017:2018)
Ta slovenski standard je istoveten z: EN ISO 28017:2018
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
83.140.40 Gumene cevi Hoses
SIST EN ISO 28017:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 28017:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 28017:2018


EN ISO 28017
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2018
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 28017:2011
English Version

Rubber hoses and hose assemblies, wire or textile
reinforced, for dredging applications - Specification (ISO
28017:2018)
Tuyaux et flexibles en caoutchouc, à armature textile Gummischläuche und Schlauchleitungen, Draht- oder
ou métallique, pour des applications de dragage - Textilverstärkt für Nassbaggeranwendungen -
Spécifications (ISO 28017:2018) Anforderung (ISO 28017:2018)
This European Standard was approved by CEN on 9 March 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28017:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 28017:2018
EN ISO 28017:2018 (E)
Contents Page
European foreword . 3


2

---------------------- Page: 4 ----------------------

SIST EN ISO 28017:2018
EN ISO 28017:2018 (E)
European foreword
This document (EN ISO 28017:2018) has been prepared by Technical Committee ISO/TC 45 “Rubber
and plastics hoses and hose assemblies” in collaboration with Technical Committee CEN/TC 218
“Rubber and plastics hoses and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall
be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 28017:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 28017:2018 has been approved by CEN as EN ISO 28017:2018 without any modification.

3

---------------------- Page: 5 -------
...

SLOVENSKI STANDARD
oSIST prEN ISO 28017:2017
01-november-2017
*XPHQHFHYLLQFHYQLSULNOMXþNLRMDþHQL]åLFDPLDOLWHNVWLORP]DXSRUDERY
YRGQHPEDJUX6SHFLILNDFLMD ,62)',6
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications -
Specification (ISO/FDIS 28017:2017)
Gummischläuche und Schlauchleitungen, Draht- oder Textilverstärkt für
Nassbaggeranwendungen - Anforderung (ISO/FDIS 28017:2017)
Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des
applications de dragage - Spécifications (ISO/FDIS 28017:2017)
Ta slovenski standard je istoveten z: prEN ISO 28017
ICS:
83.140.40 Gumene cevi Hoses
oSIST prEN ISO 28017:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 28017:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 28017:2017
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 28017
ISO/TC 45/SC 1
Rubber hoses and hose assemblies,
Secretariat: DSM
wire or textile reinforced, for dredging
Voting begins on:
2017­08­25 applications — Specification
Voting terminates on:
Tuyaux et flexibles en caoutchouc, à armature textile ou métallique,
2017­11­17
pour des applications de dragage — Spécifications
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 28017:2017(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 28017:2017
ISO/FDIS 28017:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH­1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 28017:2017
ISO/FDIS 28017:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 1
4  Classification . 2
4.1 Classes . 2
4.2 Grades . 2
5 Materials and construction . 3
5.1 Hoses . 3
5.2 Flotation material . 3
5.3 End f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.