iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 20321:2020

(Main)

Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators (ISO 20321:2020)

Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators (ISO 20321:2020)

This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for onshore and offshore applications of such elevators in the petroleum and petrochemical industries.
This document does not cover any other type of elevator. It is not applicable to the following types of products:
—     remote control devices;
—     lifting nubbins;
—     lifting plugs;
—     lifting subs;
—     internal gripping devices;
—     equipment for lifting tubular from and onto a vessel;
—     elevator links or bails.
This list is not exhaustive.
This document is not applicable to powered elevators manufactured before the date of this publication.
NOTE    Annex A provides the relation between the clauses of the European Directive on machinery (Directive 2006/42/EC) and this document, for potential significant hazards and the safety requirements dealing with them for powered elevators.

Erdöl-, petrochemische und Erdgasindustrie - Sicherheit von Maschinen - Angetriebene Elevatoren (ISO 20321:2020)

Für Maschinen, die nach den Anforderungen dieser Typ-C-Norm konzipiert und gebaut worden sind, gilt: Wenn die Anforderungen in dieser Typ-C-Norm von den Anforderungen in Typ-A- oder Typ-B-Normen abweichen, haben die Anforderungen dieser Typ-C-Norm Vorrang gegenüber den Anforderungen der anderen Normen.Anwendungsbereich
Diese Europäische Norm legt allgemeine Sicherheitsanforderungen an die Konstruktion, Prüfung und Produktion von angetriebenen Elevatoren fest. Die Anforderungen gelten für die On- und Offshore-Anwendung solcher Elevatoren in der Erdöl- und petrochemischen Industrie.
Dieses Dokument gilt nicht für andere Arten von Elevatoren. Es ist nicht anwendbar auf folgende Produktarten:
- Fernsteuerungseinrichtungen;
- Hebeösen;
- Tragzapfen;
- Hebekappen;
- interne Greifvorrichtungen;
- Geräte zum Heben des Rohres von einem und auf ein Schiff;
- Zugstangen oder Bügel.
Diese Liste ist nicht vollständig.
Das vorliegende Dokument gilt nicht für angetriebene Elevatoren, die vor dem Datum dieser Veröffentlichung hergestellt wurden.
ANMERKUNG Anhang A enthält Angaben zum Zusammenhang zwischen den Abschnitten der Europäischen Richtlinie über Maschinen (Richtlinie 2006/42/EG) und diesem Dokument hinsichtlich potenzieller signifikanter Gefährdungen und der Sicherheitsanforderungen in Verbindung mit angetriebenen Elevatoren.

Industries du pétrole, de la pétrochimie et du gaz naturel - Sécurité des machines - Élévateurs motorisés (ISO 20321:2020)

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Varnost strojev - Električna dvigala (ISO 20321:2020)

General Information

Status
Published
Publication Date
24-Mar-2020
Withdrawal Date
29-Sep-2020
ICS
13.110 - Safety of machinery
75.180.10 - Exploratory, drilling and extraction equipment
Technical Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Drafting Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Mar-2020
Due Date
06-Nov-2019
Completion Date
25-Mar-2020
Ref Project
SIST EN ISO 20321:2020 - Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators (ISO 20321:2020)

Buy Standard

EN ISO 20321:2020 - BARVEEN ISO 20321:2020 - BARVE
PreviousNext
Standard
EN ISO 20321:2020 - BARVE
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2020
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina -
Varnost strojev - Električna dvigala (ISO 20321:2020)
Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered
elevators (ISO 20321:2020)
Erdöl-, petrochemische und Erdgasindustrie - Sicherheit von Maschinen - Angetriebene
Elevatoren (ISO 20321:2020)
Industries du pétrole, de la pétrochimie et du gaz naturel - Sécurité des machines -
Élévateurs motorisés (ISO 20321:2020)
Ta slovenski standard je istoveten z: EN ISO 20321:2020
ICS:
13.110 Varnost strojev Safety of machinery
53.020.01 Dvigalne naprave na splošno Lifting appliances in general
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 20321
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 13.110; 75.180.10
English Version
Petroleum, petrochemical and natural gas industries -
Safety of machineries - Powered elevators (ISO
20321:2020)
Industries du pétrole, de la pétrochimie et du gaz Erdöl-, petrochemische und Erdgasindustrie -
naturel - Sécurité des machines - Élévateurs motorisés Sicherheit von Maschinen - Angetriebene Elevatoren
(ISO 20321:2020) (ISO 20321:2020)
This European Standard was approved by CEN on 19 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20321:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 20321:2020) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20321:2020 has been approved by CEN as EN ISO 20321:2020 without any modification.

INTERNATIONAL ISO
STANDARD 20321
First edition
2020-03
Petroleum, petrochemical and natural
gas industries — Safety of machineries
— Powered elevators
Industries du pétrole, de la pétrochimie et du gaz naturel — Sécurité
des machines — Élévateurs motorisés
Reference number
ISO 20321:2020(E)
©
ISO 2020
ISO 20321:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 20321:2020(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 5
5 Safety requirements and/or protective/risk reduction measures . 5
5.1 General requirements for powered elevators . 5
5.2 Mechanical strength . 5
5.3 Safety design of powered elevators . 5
5.3.1 General. 5
5.3.2 Ergonomic design . 5
5.3.3 Fastening methods and DROPS prevention of parts . 5
5.3.4 Suspension points . 6
5.3.5 Moving parts, pinch points and guards . 6
5.4 Other protective measures . 7
5.4.1 Risks due to surfaces, edges or angles . 7
5.4.2 Size and type verification (errors of fitting) . 7
5.4.3 Static electricity . 7
5.4.4 Loss of stability . 7
5.4.5 Explosion prevention . 7
5.4.6 Controls . 7
5.4.7 Elevator coating . 7
5.4.8 Noise . 8
5.5 Specific risks for powered elevators . 8
5.5.1 General. 8
5.5.2 External power source . 8
5.5.3 Feedback signals . 8
5.5.4 Danger zone . 8
5.6 Stops for an assembly of machinery . 9
5.6.1 General. 9
5.6.2 Start of the movement . 9
5.6.3 Normal stop . 9
5.6.4 Operational stop . 9
5.6.5 Emergency shutdown . 9
5.7 Failure of power supply .10
5.8 Verification of safety requirements and/or protective/risk reduction measures .10
5.8.1 General.10
5.8.2 Service life .10
5.8.3 Fatigue life .10
5.8.4 Maintenance .10
6 Functions for preparing the elevator for a safe lift — Wrapping, securing, locking
and verification .10
6.1 General .10
6.2 Black box approach .11
6.3 Wrapping.11
6.4 Securing.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 2588:2024(Main)
Aerospace series - Bearing, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
kSIST FprEN 2588:2024

This document specifies the characteristics of spherical plain bearings in corrosion resisting steel, with assembly slots, metric series, with or without lubrication holes and groove, intended for use in fixed or moving parts of aircraft structure and control mechanisms, within the temperature range from −54 °C to 150 °C.
It also applies to the following temperature ranges when lubricated with the following greases (see EN 2337):
-   ester type very high pressure grease (code letter A), operating range from −73 °C to 121 °C;
-   synthetic hydrocarbon type very high pressure grease general purpose (code letter B), operating range from −54 °C to 177 °C.
Their field of application when lubricated with grease code letter A is limited to 121 °C.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18075:2024(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular economy and sustainability - Recommendations/guidelines for design
kSIST-TS FprCEN/TS 18075:2024

The aim of this document is to provide general recommendations and guidelines on how to design a product to optimize its reuse and recyclability at the end of its lifetime as well as to take into account sustainable sourcing of materials for all floor covering product groups covered by CEN/TC 134. The overall target is to avoid waste and pollution and to achieve a product fit for the circular economy.
In a linear economy, the focus of product design is on developing new products without considering the recycling or reuse of the raw materials used.
This document provides guidance for processes allowing for (raw) materials used to be returned to the economic cycle based on circular design principles. The focus is on open systems that allow for economically interesting alternatives and are not limited to the principle of closed cycles (product to product).
Specific attention is given to renewable materials, where applicable.
The document is structured along the life cycle of the products, starting with the production phase.
Excluded is packaging, which is not considered part of the product end-of-life stage.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18562-3:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic substances (ISO 18562-3:2024)
kSIST FprEN ISO 18562-3:2024

This document specifies tests for the emissions of volatile organic substances from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify emissions of volatile organic substances that are added to the respirable gas stream by the materials of the gas pathway. This document establishes acceptance criteria for these tests.
NOTE            Gaseous emission of volatile organic substances includes emissions of volatile organic compounds, semi-volatile organic compounds and very volatile organic compounds.
This document addresses potential contamination of the gas stream arising from the gas pathways of medical devices or accessories, which is then conducted to the patient.
This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing.
This document does not address biological evaluation of the surfaces of gas pathways that are in direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE            Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 series.
This document is intended to be read in conjunction with ISO 18562-1.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 899-2:2024(Main)
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2024)
kSIST FprEN ISO 899-2:2024

This document specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pre-treatment, temperature and humidity. It is only applicable to a simple freely supported beam loaded at mid-span (three-point-loading test).
 The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials (see ISO 472 for definitions) test specimens moulded directly or machined from sheets or moulded articles.
NOTE            The method can be unsuitable for certain fibre-reinforced materials due to differences in fibre orientation
The method is intended to provide data for engineering-design, quality control, research and development purposes.
The method might not be applicable for determining the flexural creep of rigid cellular plastics (attention is drawn in this respect to ISO 1209-1 and ISO 1209-2).

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18562-2:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2024)
kSIST FprEN ISO 18562-2:2024

This document specifies tests for the emissions of particulate matter from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify particles from 0,25 µm diameter to 10 µm diameter that are emitted by the medical device, its parts or accessories into the respirable gas stream. This document establishes acceptance criteria for these tests.
This document does not address nanoparticles. Insufficient data exist to establish exposure limits for particles less than 0,25 µm diameter.
This document does not address particles larger than 10 µm diameter. These particles are deposited in the nasal cavity. Additional information can be needed for medical devices or accessories that bypass the nose. This is outside the scope of this document but can be required by some authorities having jurisdiction.
This document therefore adopts the same approach as the US Environmental Protection Agency (EPA) in setting limits based solely on particle size and not their chemistry.
This document addresses potential contamination of the gas stream arising from the gas pathways, which is then conducted to the patient.
This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing.
This document does not address biological evaluation of the particles that are deliberately released by a nebulizer (i.e. the therapeutic agent).
This document does not address biological evaluation of the surfaces of gas pathways that have direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories, containing gas pathways that are addressed by this document, include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces, and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE            Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 (all parts).

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13997:2024(Main)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2024)
oSIST prEN ISO 13997:2024

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17984-1:2024(Main)
Assistance dogs - Part 1: Vocabulary
SIST EN 17984-1:2024

This document specifies the terms and definitions that apply to:
—   different types of assistance dogs;
—   the beneficiary and client services;
—   health and disabilities;
—   assistance dog service providers;
—   assistance dog training staff and related professionals;
—   the socialization and training processes;
—   conformity assessment, identification and registration;
—   accessibility.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16709:2024(Main)
Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
kSIST FprEN 16709:2024

This document specifies requirements and test methods for marketed and delivered high FAME (B20 and B30) diesel fuel for use in diesel engine vehicles designed or subsequently adapted to run on such fuel. High FAME diesel fuel is a mixture of up to 20 % (V/V) in total and up to 30 % (V/V) in total respectively fatty acid methyl esters (commonly known as FAME) complying with EN 14214 and automotive diesel fuel complying with EN 590.
For maintenance and control reasons high FAME (B20 and B30) diesel fuel is to be used in captive fleets that are intended to have an appropriate fuel management (see Clause 4).
NOTE 1   These products are allowed in Europe [4], but national legislation can set additional requirements or rules concerning, or even prohibiting, marketing or delivering of the product.
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.
NOTE 3   In this document, A-deviations apply (see Annex A).

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-7:2024(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023)
oSIST prEN ISO 683-7:2024

This document specifies the technical delivery requirements for bright steel products in the drawn, peeled/turned or additional ground condition and they are intended for mechanical purposes, for example for machine parts. The bright steel products are subdivided into the following steel types:
a)       non-alloy general engineering steels;
b)       non-alloy free-cutting steels;
c)        non-alloy and alloy case-hardening steels;
d)       non-alloy and alloy steels for quenching and tempering.
Bright products of stainless steels are not part of this document, they are covered by ISO 16143-4.

  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12594:2024(Main)
Bitumens and bituminous binders - Preparation of test samples
kSIST FprEN 12594:2023

This document specifies methods for preparing test samples of bitumens and bituminous binders in order to test their properties.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day