iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1371-2:1998

(Main)

Founding - Liquid penetrant inspection - Part 2: Investment castings

Founding - Liquid penetrant inspection - Part 2: Investment castings

This European standard specifies the application of liquid penetrant testing to all castings (except copper-tin and/or copper-tin-lead alloy castings, where copper is the major constituent) produced by investment casting for the general purposes. This standard does not apply to aerospace investment castings.

Gießereiwesen - Eindringprüfung - Teil 2: Feingußstücke

Diese Europäische Norm legt die Durchführung der Eindringprüfung an allen Gußstücken (ausgenommen Gußstücke aus Kupfer-Zinn- und/oder Kupfer-Zinn-Blei-Legierungen mit Kupfer als Hauptbestandteil) fest, die nach dem Feingießverfahren für allgemeine Zwecke hergestellt werden. Diese Norm gilt nicht für Feingußstücke für die Luft- und Raumfahrt.

Fonderie - Contrôle par ressuage - Partie 2: Pièces en moulage de précision (cire perdue)

La présente norme européenne spécifie l'application du contrôle par ressuage à toutes les pièces moulées (sauf les pièces moulées en alliage de cuivre-étain et/ou de cuivre-étain-plomb, où le cuivre est le principal constituant) produites par moulage de précision pour usage général. La présente norme européenne ne s'applique pas aux pièces en moulage de précision (cire perdue) pour l'aérospatiale.

Livarstvo - Preiskava s penetrirno tekočino - 2. del: Precizijsko uliti ulitki

General Information

Status
Withdrawn
Publication Date
19-May-1998
Withdrawal Date
27-Jan-2015
ICS
77.140.80 - Iron and steel castings
77.150.99 - Other products of non-ferrous metals
Technical Committee
CEN/TC 190 - Foundry technology
Drafting Committee
CEN/TC 190/WG 11 - Surface inspection
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Jan-2015
Ref Project
SIST EN 1371-2:2000 - Founding - Liquid penetrant inspection - Part 2: Investment castings

Relations

Replaced By
EN 1371-2:2015 - Founding - Liquid penetrant testing - Part 2: Investment castings
Effective Date
04-Feb-2015

Buy Standard

EN 1371-2:2000EN 1371-2:2000
PreviousNext
Standard
EN 1371-2:2000
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Eindringprüfung - Teil 2: FeingußstückeFonderie - Contrôle par ressuage - Partie 2: Pieces en moulage de précision (cire perdue)Founding - Liquid penetrant inspection - Part 2: Investment castings77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istove
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1371-2:2015(Main)
Founding - Liquid penetrant testing - Part 2: Investment castings
SIST EN 1371-2:2015

This European Standard specifies a liquid penetrant testing method for castings produced by investment casting for general purposes.
NOTE   Investment casting is sometimes referred to as lost-wax casting.
This European Standard applies to all cast metals, except copper-tin and/or copper-tin-lead alloy castings, where copper is the major constituent (see EN 1982 [3]).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1371-1:2011(Main)
Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
SIST EN 1371-1:2012

This European Standard specifies a liquid penetrant testing method for castings produced in conventional sand moulds, by gravity and low-pressure die casting, except for investment castings and high-pressure die castings.
This European Standard applies to all cast metals, except copper-tin and/or copper-tin-lead alloy castings, where copper is the major constituent.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1371-2:2015(Main)
Founding - Liquid penetrant testing - Part 2: Investment castings
SIST EN 1371-2:2015

This European Standard specifies a liquid penetrant testing method for castings produced by investment casting for general purposes.
NOTE   Investment casting is sometimes referred to as lost-wax casting.
This European Standard applies to all cast metals, except copper-tin and/or copper-tin-lead alloy castings, where copper is the major constituent (see EN 1982 [3]).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1371-1:2011(Main)
Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
SIST EN 1371-1:2012

This European Standard specifies a liquid penetrant testing method for castings produced in conventional sand moulds, by gravity and low-pressure die casting, except for investment castings and high-pressure die castings.
This European Standard applies to all cast metals, except copper-tin and/or copper-tin-lead alloy castings, where copper is the major constituent.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 5601:2024(Main)
Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023)
kSIST-TP FprCEN ISO/TR 5601:2024

This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-1:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels
kSIST FprEN 12662-1:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME). The working range is from 12 mg/kg to 26 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [4].
This document in general is applicable to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C.
This test method can be used for paraffinic diesel fuels as specified in EN 15940, for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17830:2024(Main)
Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2024)
kSIST FprEN ISO 17830:2024

This document specifies the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17827-2:2024(Main)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2024)
kSIST FprEN ISO 17827-2:2024

This document specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This document applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g. sawdust).

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-2:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 2: Fatty acid methyl esters
kSIST FprEN 12662-2:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in neat fatty acid methyl esters (FAME). The working range is from 5 mg/kg to 27 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [1].
This document in general is applicable to FAME having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. as specified in EN 14214 [2].
This test method can be used for FAME having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day