EN 1107-2:2001
(Main)Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
This European standard specifies a method for the determination of the dimensional variations after heating of thermoplastic and elastomeric roofing and sealing sheets. This is a test standard in support of the standardization of building products in the field of flexible sheets for waterproofing.
Abdichtungsbahnen - Bestimmung der Maßhaltigkeit - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen
Dieser Europäische Normentwurf beschreibt ein Verfahren zur Bestimmung der Massänderungen nach Einwirkung von Wärme von Dach- und Dichtungsbahnen aus Kunststoffen und Elastomeren
Feuilles souples d'étanchéité - Détermination de la stabilité dimensionelle - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères
La présente Norme Européenne spécifie une méthode pour la détermination des variations dimensionnelles après chauffage des membranes de toiture et d'étanchéité en thermoplastiques et en élastomères
Hidroizolacijski trakovi - Določevanje dimenzijske stabilnosti - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh
General Information
- Status
- Published
- Publication Date
- 23-Jan-2001
- Withdrawal Date
- 30-Jun-2002
- Technical Committee
- CEN/TC 254 - Flexible sheets for water proofing
- Drafting Committee
- CEN/TC 254/SC 2 - Synthetic sheets
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 11-May-2021
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 1107-2:2001 is a European (CEN) test standard that specifies a method for determining the dimensional stability of thermoplastic and elastomeric roofing and sealing sheets used in roof waterproofing. The standard describes how to measure dimensional variations after heating for flexible sheets for waterproofing, supporting harmonized product assessment and quality control in building applications.
Key topics and technical requirements
The standard focuses on controlled laboratory testing to assess how plastic and rubber roofing sheets change size when exposed to heat. Important technical topics covered include:
- Scope and applicability: Applies to thermoplastic and elastomeric (plastic and rubber) sheets intended for roof waterproofing and sealing.
- Test principle: Measurement of dimensional variations after a defined heating treatment to evaluate shrinkage, expansion or other dimensional changes.
- Specimen preparation: Requirements for sampling and preparing sheet specimens before testing to ensure representative and reproducible results.
- Heating procedure: A specified heating step (as defined in the standard) followed by measurement to determine dimensional changes.
- Measurement and calculation: How to measure dimensions before and after heating and how to calculate dimensional variation (expressed as a percentage or linear change).
- Reporting: Required test data, conditions, and results presentation to support product documentation and conformity assessment.
- Quality and reproducibility: Procedures to ensure consistent laboratory conditions and repeatable results across test facilities.
(Exact test temperatures, times and calculation formulas are defined in the full EN 1107-2:2001 text.)
Applications and users
EN 1107-2:2001 is practical for anyone involved in the manufacture, testing, specification or regulation of flexible roof waterproofing products:
- Manufacturers use it for product development, quality control and to demonstrate compliance with European product standards.
- Independent testing laboratories perform the specified dimensional stability tests and provide certificates or test reports.
- Specifiers and architects rely on the test results to select materials with acceptable thermal dimensional behaviour for roof designs.
- Contractors and roofers use the data to understand installation tolerances and potential on-roof performance.
- Regulatory bodies and product certification schemes reference the standard when assessing conformity of waterproofing sheets.
Related standards
EN 1107-2:2001 forms part of the suite of standards for flexible sheets for waterproofing. It is typically used alongside other European standards for product characteristics, performance testing and installation requirements for roofing membranes and sealing materials.
Keywords: EN 1107-2:2001, dimensional stability, flexible sheets for waterproofing, plastic and rubber sheets, roof waterproofing, thermoplastic, elastomeric, CEN test standard.
Frequently Asked Questions
EN 1107-2:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing". This standard covers: This European standard specifies a method for the determination of the dimensional variations after heating of thermoplastic and elastomeric roofing and sealing sheets. This is a test standard in support of the standardization of building products in the field of flexible sheets for waterproofing.
This European standard specifies a method for the determination of the dimensional variations after heating of thermoplastic and elastomeric roofing and sealing sheets. This is a test standard in support of the standardization of building products in the field of flexible sheets for waterproofing.
EN 1107-2:2001 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1107-2:2001 has the following relationships with other standards: It is excused to EN 1107-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1107-2:2001 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1107-2:2001 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung der Maßhaltigkeit - Teil 2: Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de la stabilité dimensionelle - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomeresFlexible sheets for waterproofing - Determination of dimensional stab
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...