EN 13859-2:2014
(Main)Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
This European standard specifies the characteristics of flexible sheets for underlays for walls which are to be used in walls behind outside wall coverings in order to avoid penetration of wind and water from outside. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für Wände
Diese Europäische Norm legt die Eigenschaften von Abdichtungsbahnen zur Anwendung als Unterdeck- und Unterspannbahnen für Wände fest, die hinter außenseitigen Wandverkleidungen zu verlegen sind, um das Eindringen von Wind und Wasser von außen zu verhindern. Sie legt die Anforderungen und Prüfverfahren fest und behandelt die Bewertung der Konformität der Produkte nach den hierin angegebenen Anforderungen.
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Écrans souples pour murs extérieurs
La présente Norme européenne spécifie les caractéristiques des écrans souples pare-pluie, destinés à être utilisés derrière l’habillage des murs extérieurs, afin d’éviter la pénétration du vent et de l’eau venant de l’extérieur. Elle exprime les spécifications et les méthodes d’essai destinées à évaluer la conformité des produits avec les exigences du présent document.
Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za stene
EN 13859-1 določa lastnosti hidroizolacijskih trakov za podložne folije, ki se uporabljajo na strehah. Določa zahteve in preskusne metode ter predvideva vrednotenje skladnosti proizvodov z zahtevami iz tega dokumenta.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za steneAbdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für WändeFeuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2 : Ecrans souples pour murs extérieursFlexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 13859-2:2014SIST EN 13859-2:2014en,fr,de01-julij-2014SIST EN 13859-2:2014SLOVENSKI
STANDARDSIST EN 13859-2:20101DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13859-2
April 2014 ICS 91.100.50 Supersedes EN 13859-2:2010English Version
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Écrans souples pour murs extérieurs
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für Wände This European Standard was approved by CEN on 16 February 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13859-2:2014 ESIST EN 13859-2:2014
Page
Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Product characteristics .6 4.1 General .6 4.2 Dimensions, straightness and mass per unit area .7 4.3 Application related characteristics .7 4.4 Dangerous substances .8 5 Testing .9 5.1 Sampling .9 5.2 Test methods .9 6 Assessment and verification of the constancy of performance – AVCP . 10 6.1 General . 10 6.2 Type Testing . 11 6.3 Factory production control (FPC) . 12 7 Product data sheet. 16 8 Marking, labelling and packaging . 16 Annex A (normative) Determination of tensile properties . 17 A.1 General . 17 A.2 Apparatus . 17 A.3 Sampling . 17 A.4 Preparation of test specimens . 17 A.5 Procedure . 17 A.6 Expression and evaluation of results . 18 A.7 Test report . 19 Annex B (normative) Determination of resistance to tearing . 20 B.1 General . 20 B.2 Apparatus . 20 B.3 Sampling . 20 B.4 Preparation of test specimens . 20 B.5 Procedure . 20 B.6 Expression and evaluation of results . 21 B.7 Test report . 21 Annex C (normative) Artificial ageing by exposure to UV and heat . 22 C.1 General . 22 C.2 Principle . 22 C.3 Apparatus . 22 C.4 Preparation of test specimens . 22 C.5 Procedure . 23 C.6 Expression of results . 23 C.7 Test report . 23 Annex D (normative) Product type determination and frequencies of testing for factory production control . 25 Annex E (informative) Example of a product data sheet . 26 SIST EN 13859-2:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.