EN ISO 3452-3:2013
(Main)Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)
ISO 3452-3:2013 describes two types of reference blocks: Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant testing.
The reference blocks are to be used in accordance with ISO 3452-1:2013.
Zerstörungsfreie Prüfung - Eindringprüfung - Teil 3: Kontrollkörper (ISO 3452-3:2013)
Diese Internationale Norm legt zwei Arten von Kontrollkörpern fest:
- Kontrollkörper 1 werden verwendet, um die Empfindlichkeitsstufen von fluoreszierenden und farbigen Eindringsystemen festzulegen;
- Kontrollkörper 2 werden verwendet, um die routinemäßige Beurteilung der fluoreszierenden und farbigen Eindringprüfung durchzuführen.
Die Kontrollkörper sind nach Teil 1 dieser Internationalen Norm anzuwenden.
Essais non destructifs - Examen par ressuage - Partie 3: Pièces de référence (ISO 3452-3:2013)
L'ISO 3452-3:2013 décrit deux types de pièces de référence:
les pièces de référence de Type 1 sont utilisées pour déterminer les niveaux de sensibilité des familles de produits de ressuage fluorescents et colorés;
les pièces de référence de Type 2 sont utilisées pour l'évaluation périodique de la performance des installations de ressuage fluorescent et coloré et des récipients en partie utilisés.
Les pièces de référence doivent être utilisées conformément à l'ISO 3452-1:2013.
Neporušitvene preiskave - Pregled s penetranti - 3. del: Primerjalni vzorci (ISO 3452-3:2013)
Ta mednarodni standard opisuje dva tipa primerjalnih vzorcev:
— Primerjalni vzorci tipa 1 se uporabljajo za določevanje nivoja občutljivosti tako fluorescenčnih skupin penetrantov kot skupin penetrantov kontrastnih barv;
— Primerjalni vzorci tipa 2 se uporabljajo za običajno ocenjevanje delovanja tako fluorescenčnih skupin penetrantov kot skupin penetrantov kontrastnih barv; Primerjalni vzorci se morajo uporabljati v skladu s 1. delom tega mednarodnega standarda.
General Information
- Status
- Published
- Publication Date
- 19-Nov-2013
- Withdrawal Date
- 30-May-2014
- Technical Committee
- CEN/TC 138 - Non-destructive testing
- Drafting Committee
- CEN/TC 138/WG 4 - Penetrant testing
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 20-Nov-2013
- Due Date
- 06-Apr-2014
- Completion Date
- 20-Nov-2013
Relations
- Effective Date
- 27-Nov-2013
- Effective Date
- 27-Nov-2013
Overview
EN ISO 3452-3:2013 - "Non-destructive testing - Penetrant testing - Part 3: Reference test blocks" (CEN endorsed) specifies the design, construction and identification of reference test blocks used to assess and calibrate penetrant testing (PT) systems. The standard defines two types of reference blocks and requires their use in accordance with ISO 3452-1 (general principles). This part is intended for use with both fluorescent penetrant and colour contrast penetrant methods.
Key topics and technical requirements
- Type 1 reference blocks (sensitivity determination)
- Set of four rectangular panels (typical 35 × 100 × 2 mm) on a brass base.
- Nickel-chromium plating thicknesses: 10 µm, 20 µm, 30 µm, 50 µm.
- Transverse cracks produced by stretching; crack width:depth ratio ≈ 1:20.
- Used to determine sensitivity levels of penetrant product families (fluorescent and colour contrast - colour systems use 30 µm and 50 µm panels).
- Type 2 reference blocks (routine performance assessment)
- Single rectangular panel: 155 × 50 × 2.5 mm, base material stainless steel X2 Cr Ni Mo 17-12-3 (HV20 ≈ 150 ± 10).
- Rinsability area: four adjacent 25 × 35 mm zones with surface roughnesses R = 2.5 µm, 5 µm, 10 µm, 15 µm (R = 2.5 may be sand-blasted; others by electroerosion).
- Defect area: plated with electroless nickel 60 µm ± 3 µm and a thin hard chromium 0.5–1.5 µm; heat-treated to reach specified hardnesses (nickel HV0.2 ≈ 500–600; post-chrome heat treatment to HV0.3 ≈ 900–1 000).
- Five equidistant artificial indentations (created from the reverse side) with applied forces typically 2.0, 3.5, 5.0, 6.5, 8.0 kN and typical defect diameters ≈ 3–5.5 mm.
- Documentation and identification
- Each block must be identified with the ISO number, supplier ID and serial number.
- A Type 3.1 certificate (ISO 10474 / EN 10204) must accompany each block showing measured defect sizes and rinsability roughness values.
Applications
- Calibrating and verifying sensitivity of penetrant testing consumables and processes.
- Routine quality control and performance checks of PT inspection lines and procedures.
- Assessing rinsability and wash-off behavior of penetrants on different surface finishes.
- Training and competency validation for NDT technicians in penetrant inspection.
Who should use this standard
- NDT technicians and supervisors performing penetrant testing.
- Quality assurance / QC engineers in manufacturing, aerospace, oil & gas, automotive.
- Inspection laboratories, certification bodies and suppliers/manufacturers of reference blocks.
- Purchasing and metrology teams specifying certified reference artefacts for PT.
Related standards
- ISO 3452-1 (General principles of penetrant testing)
- ISO 3452-2 (Testing of penetrant materials)
- ISO 10474 / EN 10204 (Inspection documents / Type 3.1 certificates)
- Relevant stainless steel and tool-steel standards referenced for base materials
EN ISO 3452-3:2013 provides a standardized foundation for reproducible PT sensitivity checks and routine performance assessment, ensuring consistent inspection quality across industries using penetrant testing.
Frequently Asked Questions
EN ISO 3452-3:2013 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)". This standard covers: ISO 3452-3:2013 describes two types of reference blocks: Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant testing. The reference blocks are to be used in accordance with ISO 3452-1:2013.
ISO 3452-3:2013 describes two types of reference blocks: Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant testing. The reference blocks are to be used in accordance with ISO 3452-1:2013.
EN ISO 3452-3:2013 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 3452-3:2013 has the following relationships with other standards: It is inter standard links to EN ISO 3452-3:1998/AC:2001, EN ISO 3452-3:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 3452-3:2013 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 3452-3:2013 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST EN ISO 3452-3:2000
SIST EN ISO 3452-3:2000/AC:2004
Neporušitvene preiskave - Pregled s penetranti - 3. del: Primerjalni vzorci (ISO
3452-3:2013)
Non-destructive testing - Penetrant testing - Part 3: reference test blocks (ISO 3452-
3:2013)
Zerstörungsfreie Prüfung - Eindringprüfung - Teil 3: Kontrollkörper (ISO 3452-3:2013)
Essais non destructifs - Examen par ressuage - Partie 3: Pièces de référence (ISO 3452-
3:2013)
Ta slovenski standard je istoveten z: EN ISO 3452-3:2013
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 3452-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2013
ICS 19.100 Supersedes EN ISO 3452-3:1998
English Version
Non-destructive testing - Penetrant testing - Part 3: Reference
test blocks (ISO 3452-3:2013)
Essais non destructifs - Examen par ressuage - Partie 3: Zerstörungsfreie Prüfung - Eindringprüfung - Teil 3:
Pièces de référence (ISO 3452-3:2013) Kontrollkörper (ISO 3452-3:2013)
This European Standard was approved by CEN on 19 October 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3452-3:2013 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 3452-3:2013) has been prepared by Technical Committee CEN/TC 138 “Non-
destructive testing", the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 "Non-destructive testing".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2014, and conflicting national standards shall be withdrawn at the
latest by May 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3452-3:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3452-3:2013 has been approved by CEN as EN ISO 3452-3:2013 without any modification.
INTERNATIONAL ISO
STANDARD 3452-3
Second edition
2013-11-15
Non-destructive testing — Penetrant
testing —
Part 3:
Reference test blocks
Essais non destructifs — Examen par ressuage —
Partie 3: Pièces de référence
Reference number
ISO 3452-3:2013(E)
©
ISO 2013
ISO 3452-3:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 3452-3:2013(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Description of reference blocks . 1
4 Type 1 reference block design and dimensions . 1
5 Type 2 reference block design and dimensions . 2
5.1 Design . 2
5.2 Measurement . 5
6 Identification . 5
Bibliography . 6
ISO 3452-3:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...