EN 4624:2010

SLOVENSKI STANDARD
01-julij-2010
$HURQDYWLND9ORåNLQDYRM0-VDPR]DSLUDOQLVVDPR]DJR]GQLPNOMXþHPL]
WRSORWQRRGSRUQH]OLWLQHQDQLNOMHYLRVQRYL1,3+:DVSDOR\SRVUHEUHQL
Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat
resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate
Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden, selbstsichernd, mit
selbsträumenden Stiften,aus Hochwarmfeste Nickellegierung NI-PH1302 (Waspaloy),
Versilbert
Série aérospatiale - Douilles filetées, à filetage MJ, à freinage interne, à clavettes auto-
brochantes, en alliage résistant à chaud à base de nickel NI-PH1302 (Waspaloy),
argentées
Ta slovenski standard je istoveten z: EN 4624:2010
ICS:
49.030.10 Navoji Screw threads
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4624
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 49.030.30
English Version
Aerospace series - Inserts, MJ threads, self-locking, with self-
broaching keys, in heat resisting nickel base alloy NI-PH1302
(Waspaloy), silver plate
Série aérospatiale - Douilles filetées, à filetage MJ, à Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden,
freinage interne, à clavettes auto-brochantes, en alliage selbstsichernd, mit selbsträumenden Stiften, aus
résistant à chaud à base de nickel NI-PH1302 (Waspaloy), Hochwarmfeste Nickellegierung NI-PH1302 (Waspaloy),
argentées Versilbert
This European Standard was approved by CEN on 16 January 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4624:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Required characteristics .5
3.1 Configuration – Dimensions – Tolerances – Masses .5
3.2 Material .6
3.3 Surface treatment .6
4 Insert definition .6
4.1 Normal size insert .6
4.2 First repair size insert .7
4.3 Second repair size insert .8
4.4 Special thread dimensions .8
5 Designation .9
6 Marking and identification .9
7 Technical specification .9

Foreword
This document (EN 4624:2010) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgi
...