EN ISO 9934-1:2001
(Main)Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001)
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001)
This European standard specifies general principles for the magnetic particle testing of ferromagnetic materials. Magnetic particle testing is primarily applicable to the detection of surface-breaking discontinuities, particularly cracks. It can also detect discontinuities just below the surface but its sensitivity diminishes rapidly with depth.
The standard specifies the surface preparation of the part to be tested, magnetization techniques, requirements and application of the detection media and the recording and interpretation of results. Acceptance criteria are not defined. Additional requirements for the magnetic particle testing of particular items are defined in product standards (see the relevant EN Standard).
This standard does not apply to the residual magnetization method.
Zerstörungsfreie Prüfung - Magnetpulverprüfung - Teil 1: Allgemeine Grundlagen (ISO 9934-1:2001)
Diese EN beschreibt allgemeine Grundlagen für die Magnetpulverprüfung von ferromagnetischen Werkstoffen. Die Magnetpulverprüfung ist in erster Linie ein Verfahren zum Nachweis von Oberflächeninhomogenitäten, speziell von Rissen. Es können auch Inhomogenitäten dicht unter der Oberfläche nachgewiesen werden. Die Empfindlichkeit nimmt mit zunehmender Tiefenlage schnell ab.
Essais non destructifs - Magnétoscopie - Partie 1: Principes généraux du contrôle (ISO 9934-1:2001)
La présente Norme européenne définit les principes généraux pour l'examen par magnétoscopie des matériaux ferromagnétiques. Le contrôle par magnétoscopie s'applique principalement à la détection des discontinuités superficielles débouchantes, en particulier les fissures. Il peut aussi concerner les discontinuités sous-jacentes mais sa sensibilité diminue rapidement avec la profondeur.
La norme définit la préparation de surface de la pièce soumise à essai, les exigences concernant les techniques d'aimantation, les produits indicateurs et leur mode d'application ainsi que l'enregistrement et l'interprétation des résultats. Les critères d'acceptation ne sont pas définis. Dans certains cas, des prescriptions supplémentaires pour le contrôle par magnétoscopie de pièces particulières sont définies dans les normes de produits (voir la norme EN pertinente).
La présente norme ne s'applique pas à la méthode par aimantation permanente.
Neporušitveno preskušanje - Preskušanje z magnetnimi delci - 1. del: Splošna načela (ISO 9934-1:2001)
General Information
- Status
- Withdrawn
- Publication Date
- 30-Nov-2001
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 138 - Non-destructive testing
- Drafting Committee
- CEN/TC 138/WG 5 - Magnetic particle testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Sep-2015
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 13-Nov-2010
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN ISO 9934-1:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001)". This standard covers: This European standard specifies general principles for the magnetic particle testing of ferromagnetic materials. Magnetic particle testing is primarily applicable to the detection of surface-breaking discontinuities, particularly cracks. It can also detect discontinuities just below the surface but its sensitivity diminishes rapidly with depth. The standard specifies the surface preparation of the part to be tested, magnetization techniques, requirements and application of the detection media and the recording and interpretation of results. Acceptance criteria are not defined. Additional requirements for the magnetic particle testing of particular items are defined in product standards (see the relevant EN Standard). This standard does not apply to the residual magnetization method.
This European standard specifies general principles for the magnetic particle testing of ferromagnetic materials. Magnetic particle testing is primarily applicable to the detection of surface-breaking discontinuities, particularly cracks. It can also detect discontinuities just below the surface but its sensitivity diminishes rapidly with depth. The standard specifies the surface preparation of the part to be tested, magnetization techniques, requirements and application of the detection media and the recording and interpretation of results. Acceptance criteria are not defined. Additional requirements for the magnetic particle testing of particular items are defined in product standards (see the relevant EN Standard). This standard does not apply to the residual magnetization method.
EN ISO 9934-1:2001 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 9934-1:2001 has the following relationships with other standards: It is inter standard links to EN ISO 9934-1:2015, EN 1330-1:2014, EN ISO 9934-3:2015, EN 1330-2:1998, EN ISO 9712:2022, EN ISO 3059:2012, EN ISO 12707:2016, EN ISO 9934-2:2015, EN ISO 6326-3:1997, EN 1186-2:2002, EN ISO 9934-3:2002, EN ISO 439:2010, EN 13130-1:2004, EN 10213:2007, EN ISO 119:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 9934-1:2001 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 9934-1:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung - Magnetpulverprüfung - Teil 1:Allgemeine Grundlagen (ISO 9934-1:2001)Essais non destructifs - Magnétoscopie - Partie 1: Principes généraux du contrôle (ISO 9934-1:2001)Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001)19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN ISO 9934-1:2001SIST EN ISO 9934-1:2002en01-junij-2002SIST EN ISO 9934-1:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 9934-1December 2001ICS 19.100English versionNon-destructive testing - Magnetic particle testing - Part 1:General principles (ISO 9934-1:2001)Essais non destructifs - Magnétoscopie - Partie 1:Principes généraux du contrôle (ISO 9934-1:2001)Zerstörungsfreie Prüfung - Magnetpulverprüfung - Teil 1:Allgemeine Grundlagen (ISO 9934-1:2001)This European Standard was approved by CEN on 29 December 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 9934-1:2001 ESIST EN ISO 9934-1:2002
(informative)
Example for determination of currents required to achieve specified tangentialfield strengths for various magnetization techniques.15Annex ZA
(informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.18SIST EN ISO 9934-1:2002
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...