EN 415-1:2000+A1:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Verpackungsmaschinen - Teil 1: Terminologie und Klassifikation von Bezeichnungen für Verpackungsmaschinen und zugehörige AusrüstungenSécurité des machines d'emballage - Partie 1: Terminologie et classification des machines d'emballage et de l'équipement associéPackaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment55.200Pakirni strojiPackaging machinery01.040.55Pakiranje in distribucija blaga (Slovarji)Packaging and distribution of goods (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 415-1:2000+A1:2009SIST EN 415-1:2001+A1:2009en,fr01-april-2009SIST EN 415-1:2001+A1:2009SLOVENSKI
STANDARDSIST EN 415-1:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 415-1:2000+A1
February 2009 ICS 01.040.55; 55.200 Supersedes EN 415-1:2000English Version
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment Sécurité des machines d'emballage - Partie 1: Terminologie et classification des machines d'emballage et de l'équipement associé
Sicherheit von Verpackungsmaschinen - Teil 1: Terminologie und Klassifikation von Bezeichnungen für Verpackungsmaschinen und zugehörige Ausrüstungen This European Standard was approved by CEN on 16 April 1999 and includes Amendment 1 approved by CEN on 5 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 415-1:2000+A1:2009: ESIST EN 415-1:2001+A1:2009

Alphabetical list of packaging machines . 31 Annex B (informative)
Packaging machines named in English, French and German . 38 Annex C (informative)
Packaging machines named in English and Italian . 47 Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 59 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 60
Part 2: Pre-formed rigid container packaging machines Part 3: Form, fill and seal machines. Part 4: Palletizers and depalletizers. Part 5: Wrapping machines. !Part 6: Pallet wrapping machines. Part 7: Group and secondary packaging machines. Part 8: Strapping machines. Part 9: Noise measurement methods for packaging machines, packaging lines and auxiliary equipment - Grade 2 and 3 accuracy." According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 415-1:2001+A1:2009

This has led to confusion when reporting accidents and interpreting accident and trade statistics. The purpose of this standard is to name and define each group of packaging machines uniquely.
In most cases these names will already be in common use, however in some cases the commonly used name is ambiguous, a trade name, or used to describe more than one significantly different type of machine.
In these cases a less familiar name will be defined. Designers, manufacturers, suppliers, importers, users, enforcing authorities and other interested bodies are encouraged to use this nomenclature to improve communication and to avoid confusion, particularly when reporting accidents and preparing the documentation required by EU Directives. 1 Scope This European standard defines the field of packaging machines in detail in clause 3, but briefly these are: Filling and Dosing machines Closing machines Labelling, decorating and coding machines Cleaning, sterilising, cooling and drying machines Fill and seal machines Inspection machines Container and component handling machines Form, fill and seal machines Cartoning machines Wrapping machines Group or transit packaging machines Pallet or loading unit forming, dismantling and securing machines Annex A indicates where hazards and safety requirements for these machines can be found.
In most cases this will be in one of the parts of EN415, but in some cases it may be another European or ISO standard.
Where no specific standard covers a particular machine Annex A will indicate the most appropriate standard which can be referred to for advice. SIST EN 415-1:2001+A1:2009

These normative references are cited at the appropriate places in the text and the publications are listed hereafter.
For dated references subsequent amendments to, or revisions of, any of these publications apply to this European Standard only when incorporated in it by amendment or revision.
For undated references the latest edition of the publication referred to applies. !deleted text" EN 415-2:1999, Safety of packaging machines – Part 2: Pre-formed rigid container packaging machines. EN 415-3:1999, Safety of packaging machines – Part 3: Form, fill and seal machines. EN 415-4:1997, Packaging machines safety – Part 4: Palletizers and depalletizers. !EN 415-5:2006, Packaging machines safety – Part 5: Wrapping machines. EN 415-6:2006, Packaging machines safety – Part 6: Pallet wrapping machines. EN 415-7:2006, Safety of packaging machines – Part 7: Group and secondary packaging machines."
EN 422:1995, Rubber and plastics machines – Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction.
!EN ISO 12100-1:2003, Safety of machinery - Basic concepts, general principles for design – Part 1: Basic terminology, methodology (ISO 12100-1:2003). EN ISO 12100-2:2003, Safety of machinery - Basic concepts, general principles for design – Part 2: Technical principles (ISO 12100-2:2003)." ISO 10 821, Industrial sewing machines - Safety requirements for sewing machines, units and systems. 3 Definitions For the purposes of this standard the following definitions apply. 3.1 filling and dosing machines
packaging machines which measure out a product from bulk by some predetermined value, e.g. volume, level in a container, mass or count.
The terms listed below describe the method of measuring out or dosing the product.
The filling machine may comprise one or a number of dosing devices which may be arranged with or without a mechanism to control containers or packages as they are filled 3.1.1 Volumetric filling machines
3.1.1.1 volumetric cup filling machine filling machine which measures out a product, usually free-flowing solids or powder, in a cup of predetermined volume 3.1.1.2 volumetric piston filling machine filling machine which measures out a product, usually a liquid, paste or gas, using a reciprocating piston of predetermined volume SIST EN 415-1:2001+A1:2009

3.1.2.1 vacuum filling machine filling machine which fills a product, usually a liquid or powder, to a predetermined level in a rigid container, flow being initiated by applying a vacuum to the container 3.1.2.2 gravity filling machine filling machine which fills a product, usually a liquid or powder, to a predetermined level in a container, the product flowing under gravity 3.1.2.3 pressure filling machine filling machine which fills a carbonated liquid product under gravity, to a predetermined level in a rigid container, with the product under pressure 3.1.3 timed flow filling machines filling machines which measure out a product, usually a liquid or powder, by controlling the product flow duration to a predetermined value 3.1.4 Gravimetric filling machines
3.1.4.1 nett weighing machine filling machine which measures out a predetermined mass of product, usually free-flowing solids, before dispensing it as a fill 3.1.4.1.1 selective combination weighing machine nett weighing machine with multiple weighing units, which computes an appropriate combination of loads to achieve the predetermined mass and discharges them together as a fill SIST EN 415-1:2001+A1:2009
...