EN ISO 13766-2:2018

SLOVENSKI STANDARD
01-september-2018
1DGRPHãþD
SIST EN 13309:2010
6WURML]D]HPHOMVNDGHODLQJUDGLWHYREMHNWRY(OHNWURPDJQHWQD]GUXåOMLYRVW(0&
VWURMHY]ODVWQLPHOHNWULþQLPQDSDMDQMHPGHO'RGDWQH]DKWHYHJOHGH(0&]D
IXQNFLRQDOQRYDUQRVW,62
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC)
of machines with internal electrical power supply - Part 2: Additional EMC requirements
for functional safety (ISO 13766-2:2018)
Baumaschinen - Elektromagnetische Verträglichkeit von Maschinen mit internem
elektrischen Bordnetz - Teil 2: Zusätzliche EMV-Anforderungen für die funktionale
Sicherheit (ISO 13766-2:2018)
Engins de terrassement et machines pour la construction des bâtiments - Compatibilité
électromagnétique (CEM) des machines équipées de réseaux électriques de distribution
interne - Partie 2: Exigences CEM supplémentaires pour les fonctions de sécurité (ISO
13766-2:2018)
Ta slovenski standard je istoveten z: EN ISO 13766-2:2018
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 13766-2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2018
EUROPÄISCHE NORM
ICS 33.100.01; 53.100 Supersedes EN 13309:2010
English Version
Earth-moving and building construction machinery -
Electromagnetic compatibility (EMC) of machines with
internal electrical power supply - Part 2: Additional EMC
requirements for functional safety (ISO 13766-2:2018)
Engins de terrassement et machines pour la Baumaschinen - Elektromagnetische Verträglichkeit
construction des bâtiments - Compatibilité von Maschinen mit internem elektrischen Bordnetz -
électromagnétique (CEM) des machines équipées de Teil 2: Zusätzliche EMV-Anforderungen für die
réseaux électriques de distribution interne - Partie 2: funktionale Sicherheit (ISO 13766-2:2018)
Exigences CEM supplémentaires pour les fonctions de
sécurité (ISO 13766-2:2018)
This European Standard was approved by CEN on 9 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13766-2:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery aimed to be covered . 4

European foreword
This document (EN ISO 13766-2:2018) has been prepared by Technical Committee ISO/TC 127 "Earth-
moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment
and building material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2018, and conflicting national standards
shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13309:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13766-2:2018 has been approved by CEN as EN ISO 13766-2:2018 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M/396 to
provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the
European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive
95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.

Table ZA.1 — Correspondence between this European Standard and Annex I of
Directive 2006/42/EC
Essential Requirements of Clause(s) / subclause(s)
Remarks / Notes
Directive 2006/42/EC of this EN
1.2.1. Safety and reliability of 1; 2; 3; 4;

control systems 5.1 (except recommendation last
para);
5.1.1; 5.1.2; 5.2.1;
5.2.3; 5.2.4; 5.3.1;
5.3.3; 5.3.4; 6
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 13766-2
First edition
2018-04
Earth-moving and building
construction machinery —
Electromagnetic compatibility (EMC)
of machines with internal electrical
power supply —
Part 2:
Additional EMC requirements for
functional safety
Engins de terrassement et machines pour la construction des
bâtiments — Compatibilité électromagnétique (CEM) des machines
équipées de réseaux électriques de distribution interne —
Partie 2: Exigences CEM supplémentaires pour les fonctions de
sécurité
Reference number
ISO 13766-2:2018(E)
©
ISO 2018
ISO 13766-2:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 13766-2:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
4 General principles . 3
5 EMC phenomena . 3
5.1 General . 3
5.1.1 Performance criteria for complete machines. 4
5.1.2 Performance criteria for safety-relevant ESA . 4
5.2 Immunity of machinery . 4
5.2.1 Immunity of machinery to radiated electromagnetic fields from off-board
sources . 4
5.2.2 Immunity to radiated electromagnetic fields from on-board sources . 5
5.2.3 Immunity to electrical transients on supply and other lines of machinery . 5
5.2.4 Immunity of machinery exposed to ESD . 5
5.3 Immunity of ESA . 5
5.3.1 Immunity of ESA to radiated electromagnetic fields from off-board sources . 5
5.3.2 Immunity of ESA to radiated electromagnetic fields by on-board sources . 6
5.3.3 Immunity of ESA to electrical transients on lines . 6
5.3.4 Immunity of ESA exposed to ESD . 6
6 Test report . 6
Annex A (informative) Installation and maintenance aspects. 7
Bibliography . 8
ISO 13766-2:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for
...