EN 10169-3:2003
(Main)Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
This Part of this European Standard gives the specific requirements for continuously organic coated (coil coated) steel flat products used for building interior applications. It particularly specifies the performance requirements of different product flexibility categories and different corrosion protection categories. General information concerning continuously organic coated steel flat products is provided by EN 10169-1. Products for building exterior applications are covered by ENV 10169-2. The products covered are wide strips, sheets cut from wide strip, slit wide strips.
Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse für den Bauinneneinsatz
Produits plats en acier revêtus en continu de matières organiques (prélaqués) - Partie 3: Produits pour applications intérieures dans le bâtiment
La présente partie de cette Norme européenne donne les prescriptions particulières pour les produits plats en acier revêtus en continu de matières organiques (prélaqués) utilisés pour des applications intérieures dans le bâtiment.
Elle spécifie en particulier, les prescriptions de performance de différentes catégories de souplesse de produit et de différentes catégories de protection contre la corrosion.
Les généralités relatives aux produits plats en acier revêtus en continu de matières organiques sont données dans l'EN 10169-1.
Les produits destinés aux applications extérieures dans le bâtiment sont couverts par l'ENV 10169-2.
Les produits concernés sont des larges bandes, des tôles découpées dans les larges bandes, des larges bandes refendues, des feuillards laminés en largeur inférieure à 600 mm et des feuilles et bobines coupées à longueur.
Z organskimi materiali kontinuirno prevlečeni (prevlečeni v svitkih) ploščati jekleni izdelki – 3. del: Izdelki za notranjo vgradnjo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse für den BauinneneinsatzProduits plats en acier revetus en continu de matieres organiques (prélaqués) - Partie 3: Produits pour applications intérieures dans le bâtimentContinuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications77.140.50SROL]GHONLFlat steel products and semi-products25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10169-3:2003SIST EN 10169-3:2003en01-november-2003SIST EN 10169-3:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10169-3June 2003ICS 25.220.60; 77.140.50English versionContinuously organic coated (coil coated) steel flat products -Part 3: Products for building interior applicationsProduits plats en acier revêtus en continu de matièresorganiques (prélaqués) - Partie 3: Produits pourapplications intérieures dans le bâtimentKontinuierlich organisch beschichtete (bandbeschichtete)Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse für denBauinneneinsatzThis European Standard was approved by CEN on 9 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10169-3:2003 ESIST EN 10169-3:2003
Types of ambiences.14Annex B (informative)
More common coating materials and coating thickness(es).16Bibliography.17SIST EN 10169-3:2003
narrow strip for cold forming - Technical delivery conditions.EN 10140, Cold rolled narrow steel strip - Tolerances on dimensions and shape.EN 10142, Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical deliveryconditions.EN 10143, Continuously hot-dip metal coated steel sheet and strip - Tolerances on dimensions and shape.EN 10147, Continuously hot-dip zinc-coated structural steels strip and sheet - Technical delivery conditions.EN 10152, Electrolytically zinc coated cold rolled steel flat products - Technical delivery conditions.EN 10154, Continuously hot-dip Aluminium-Silicon (AS) coated steel strip and sheet - Technical deliveryconditions.EN 10169-1:1996, Continuously organic coated (coil coated) steel flat products - Part 1: General information(definitions, materials, tolerances, test methods).EN 10204:1991, Metallic products - Types of inspection documents.EN 10214, Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions.EN 10215, Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions.EN 10268, Cold rolled flat products made of high yield strength micro-alloyed steels for cold forming - Generaldelivery conditions.EN 10292, Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming -Technical delivery conditions.EN 13523-0:2001, Coil coated metals - Test methods - Part 0: General introduction and list of test methods.EN 13523-1, Coil coated metals - Test methods - Part 1: Coating thickness.EN 13523-2, Coil coated metals - Test methods - Part 2: Specular gloss.EN 13523-6, Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test).EN 13523-7, Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T- bend test).EN 13523-8, Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog).EN 13523-9, Coil coated metals - Test methods - Part 9: Resistance to water
immersion.EN 13523-18, Coil coated metals - Test methods - Part 18: Resistance to staining.EN 13523-22 , Coil coated metals - Test methods - Part 22: Colour difference – Visual comparison.prEN ISO 4628-2, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and sizeof defects, and of intensity of changes - Part 2: Assessment of the degree of blistering (identical to ISO/DIS 4628-2:2000).SIST EN 10169-3:2003
Besides the requirements written in this standard, there can be other international or national requirements orregulations regarding fire, safety, food contact etc. that should be considered at the time of enquiry and order.3.2ambianceenvironmental conditions which prevail in the interior of the buildingNOTE 1These conditions determine the corrosivity category of the ambience and include different parameters
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.